From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH u-boot-mvebu v3 07/18] arm: mvebu: turris_omnia: Disable Atmel SHA node if not present
Date: Wed, 27 Mar 2024 17:23:44 +0100 [thread overview]
Message-ID: <20240327162355.24584-8-kabel@kernel.org> (raw)
In-Reply-To: <20240327162355.24584-1-kabel@kernel.org>
If the FEAT_CRYPTO feature bit is present in MCU features, the board
crypto is implemented by MCU and the Atmel SHA chip is not present.
Disable Atmel SHA device-tree node in that case.
Signed-off-by: Marek Behún <kabel@kernel.org>
---
board/CZ.NIC/turris_omnia/turris_omnia.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
index b2f0088e5e..3b7a71bdad 100644
--- a/board/CZ.NIC/turris_omnia/turris_omnia.c
+++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
@@ -1007,6 +1007,25 @@ static int fixup_mcu_gpio_in_eth_wan_node(void *blob)
return 0;
}
+static void fixup_atsha_node(void *blob)
+{
+ int node;
+
+ if (!omnia_mcu_has_feature(FEAT_CRYPTO))
+ return;
+
+ node = fdt_node_offset_by_compatible(blob, -1, "atmel,atsha204a");
+ if (node < 0) {
+ printf("Cannot find ATSHA204A node!\n");
+ return;
+ }
+
+ if (fdt_status_disabled(blob, node) < 0)
+ printf("Cannot disable ATSHA204A node!\n");
+ else
+ debug("Disabled ATSHA204A node\n");
+}
+
#endif
#if IS_ENABLED(CONFIG_OF_BOARD_FIXUP)
@@ -1020,6 +1039,8 @@ int board_fix_fdt(void *blob)
fixup_msata_port_nodes(blob);
fixup_wwan_port_nodes(blob);
+ fixup_atsha_node(blob);
+
return 0;
}
#endif
@@ -1211,6 +1232,8 @@ int ft_board_setup(void *blob, struct bd_info *bd)
fixup_msata_port_nodes(blob);
fixup_wwan_port_nodes(blob);
+ fixup_atsha_node(blob);
+
return 0;
}
#endif
--
2.43.2
next prev parent reply other threads:[~2024-03-27 16:25 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-27 16:23 [PATCH u-boot-mvebu v3 00/18] Turris Omnia - New board revision support Marek Behún
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 01/18] arm: mvebu: turris_omnia: Enable LTO by default on Turris Omnia Marek Behún
2024-03-28 9:53 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 02/18] arm: mvebu: turris_omnia: Add header containing MCU command interface and use it Marek Behún
2024-03-28 9:53 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 03/18] arm: mvebu: turris_{omnia, mox}: Don't print model two times Marek Behún
2024-03-28 9:53 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 04/18] arm: mvebu: turris_omnia: Update MCU status and features reading Marek Behún
2024-03-28 9:54 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 05/18] arm: mvebu: turris_omnia: Implement getting board information from MCU Marek Behún
2024-03-28 9:56 ` Stefan Roese
2024-03-28 11:17 ` Marek Behún
2024-03-28 12:53 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 06/18] arm: mvebu: turris_omnia: Print board ECDSA public key if available Marek Behún
2024-03-28 9:56 ` Stefan Roese
2024-03-27 16:23 ` Marek Behún [this message]
2024-03-28 9:56 ` [PATCH u-boot-mvebu v3 07/18] arm: mvebu: turris_omnia: Disable Atmel SHA node if not present Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 08/18] arm: mvebu: spl: Do not build mvebu-reset in SPL Marek Behún
2024-03-28 9:58 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 09/18] arm: mvebu: system-controller: Rework to use UCLASS_SYSCON Marek Behún
2024-03-28 9:59 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 10/18] arm: mvebu: system-controller: Select mvebu-reset if DM_RESET && PCI_MVEBU Marek Behún
2024-03-28 10:00 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 11/18] arm: mvebu: system-controller: Add support for SYSRESET Marek Behún
2024-03-28 10:04 ` Stefan Roese
2024-03-28 11:21 ` Marek Behún
2024-03-28 13:01 ` Stefan Roese
2024-03-28 14:18 ` Marek Behún
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 12/18] gpio: turris_omnia_mcu: Use byteorder conversion functions Marek Behún
2024-03-28 10:12 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 13/18] gpio: turris_omnia_mcu: Update firmware features reading Marek Behún
2024-03-28 10:15 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 14/18] gpio: turris_omnia_mcu: Add support for system power off via sysreset Marek Behún
2024-03-28 10:18 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 15/18] arm: mvebu: turris_omnia: Enable poweroff command via sysreset in defconfig Marek Behún
2024-03-28 10:18 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 16/18] cmd: rng: Print "Abort" on -EINTR Marek Behún
2024-03-28 10:22 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 17/18] misc: turris_omnia_mcu: Add support for rng provided by MCU Marek Behún
2024-03-28 10:25 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 18/18] arm: mvebu: turris_omnia: Enable rng command in defconfig Marek Behún
2024-03-28 10:25 ` Stefan Roese
2024-04-04 6:38 ` [PATCH u-boot-mvebu v3 00/18] Turris Omnia - New board revision support Stefan Roese
2024-04-04 7:38 ` Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240327162355.24584-8-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox