public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de
Subject: Re: [PATCH u-boot-mvebu v3 11/18] arm: mvebu: system-controller: Add support for SYSRESET
Date: Thu, 28 Mar 2024 12:21:33 +0100	[thread overview]
Message-ID: <20240328122133.12b0e83f@dellmb> (raw)
In-Reply-To: <81922125-aa47-4be2-9e0c-c7dfd57c4ebc@denx.de>

On Thu, 28 Mar 2024 11:04:45 +0100
Stefan Roese <sr@denx.de> wrote:

> > +static int mvebu_sysreset_request(struct udevice *dev, enum sysreset_t type)
> > +{
> > +	struct regmap *regmap = syscon_get_regmap(dev->parent);
> > +	uint bit;
> > +
> > +	if (type != SYSRESET_COLD)
> > +		return -EPROTONOSUPPORT;
> > +
> > +	bit = MVEBU_GLOBAL_SOFT_RST_BIT;
> > +
> > +	regmap_update_bits(regmap, MVEBU_RSTOUTN_MASK_REG, bit, bit);
> > +	regmap_update_bits(regmap, MVEBU_SYS_SOFT_RST_REG, bit, bit);
> > +
> > +	while (1)
> > +		;  
> 
> A comment before this endless loop might be helpful here.

The code does the same as reset_cpu() in cpu.c, and the while() cycle
is not commented there.

But we can add something like
  /* something has gone wrong if we reach here, so we may as well stay
   * here */

What do you think? Could you amend the patch?

Marek

  reply	other threads:[~2024-03-28 11:21 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-27 16:23 [PATCH u-boot-mvebu v3 00/18] Turris Omnia - New board revision support Marek Behún
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 01/18] arm: mvebu: turris_omnia: Enable LTO by default on Turris Omnia Marek Behún
2024-03-28  9:53   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 02/18] arm: mvebu: turris_omnia: Add header containing MCU command interface and use it Marek Behún
2024-03-28  9:53   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 03/18] arm: mvebu: turris_{omnia, mox}: Don't print model two times Marek Behún
2024-03-28  9:53   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 04/18] arm: mvebu: turris_omnia: Update MCU status and features reading Marek Behún
2024-03-28  9:54   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 05/18] arm: mvebu: turris_omnia: Implement getting board information from MCU Marek Behún
2024-03-28  9:56   ` Stefan Roese
2024-03-28 11:17     ` Marek Behún
2024-03-28 12:53       ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 06/18] arm: mvebu: turris_omnia: Print board ECDSA public key if available Marek Behún
2024-03-28  9:56   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 07/18] arm: mvebu: turris_omnia: Disable Atmel SHA node if not present Marek Behún
2024-03-28  9:56   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 08/18] arm: mvebu: spl: Do not build mvebu-reset in SPL Marek Behún
2024-03-28  9:58   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 09/18] arm: mvebu: system-controller: Rework to use UCLASS_SYSCON Marek Behún
2024-03-28  9:59   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 10/18] arm: mvebu: system-controller: Select mvebu-reset if DM_RESET && PCI_MVEBU Marek Behún
2024-03-28 10:00   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 11/18] arm: mvebu: system-controller: Add support for SYSRESET Marek Behún
2024-03-28 10:04   ` Stefan Roese
2024-03-28 11:21     ` Marek Behún [this message]
2024-03-28 13:01       ` Stefan Roese
2024-03-28 14:18         ` Marek Behún
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 12/18] gpio: turris_omnia_mcu: Use byteorder conversion functions Marek Behún
2024-03-28 10:12   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 13/18] gpio: turris_omnia_mcu: Update firmware features reading Marek Behún
2024-03-28 10:15   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 14/18] gpio: turris_omnia_mcu: Add support for system power off via sysreset Marek Behún
2024-03-28 10:18   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 15/18] arm: mvebu: turris_omnia: Enable poweroff command via sysreset in defconfig Marek Behún
2024-03-28 10:18   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 16/18] cmd: rng: Print "Abort" on -EINTR Marek Behún
2024-03-28 10:22   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 17/18] misc: turris_omnia_mcu: Add support for rng provided by MCU Marek Behún
2024-03-28 10:25   ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 18/18] arm: mvebu: turris_omnia: Enable rng command in defconfig Marek Behún
2024-03-28 10:25   ` Stefan Roese
2024-04-04  6:38 ` [PATCH u-boot-mvebu v3 00/18] Turris Omnia - New board revision support Stefan Roese
2024-04-04  7:38   ` Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240328122133.12b0e83f@dellmb \
    --to=kabel@kernel.org \
    --cc=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox