From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH u-boot-mvebu v4 00/18] Turris Omnia - New board revision support
Date: Thu, 4 Apr 2024 09:50:49 +0200 [thread overview]
Message-ID: <20240404075107.19636-1-kabel@kernel.org> (raw)
changes since v3:
- added missing files turris_common.c and turris_common.h to patch 05/18
- added comment to patch 11/18 before while (1); as discussed in v3
v1, v2 and v3 at:
https://patchwork.ozlabs.org/project/uboot/cover/20240304152148.3847-1-kabel@kernel.org/
https://patchwork.ozlabs.org/project/uboot/cover/20240323180711.5498-1-kabel@kernel.org/
https://patchwork.ozlabs.org/project/uboot/cover/20240327162355.24584-1-kabel@kernel.org/
Marek Behún (18):
arm: mvebu: turris_omnia: Enable LTO by default on Turris Omnia
arm: mvebu: turris_omnia: Add header containing MCU command interface
and use it
arm: mvebu: turris_{omnia, mox}: Don't print model two times
arm: mvebu: turris_omnia: Update MCU status and features reading
arm: mvebu: turris_omnia: Implement getting board information from MCU
arm: mvebu: turris_omnia: Print board ECDSA public key if available
arm: mvebu: turris_omnia: Disable Atmel SHA node if not present
arm: mvebu: spl: Do not build mvebu-reset in SPL
arm: mvebu: system-controller: Rework to use UCLASS_SYSCON
arm: mvebu: system-controller: Select mvebu-reset if DM_RESET &&
PCI_MVEBU
arm: mvebu: system-controller: Add support for SYSRESET
gpio: turris_omnia_mcu: Use byteorder conversion functions
gpio: turris_omnia_mcu: Update firmware features reading
gpio: turris_omnia_mcu: Add support for system power off via sysreset
arm: mvebu: turris_omnia: Enable poweroff command via sysreset in
defconfig
cmd: rng: Print "Abort" on -EINTR
misc: turris_omnia_mcu: Add support for rng provided by MCU
arm: mvebu: turris_omnia: Enable rng command in defconfig
arch/arm/mach-mvebu/Kconfig | 25 ++
arch/arm/mach-mvebu/Makefile | 3 +-
arch/arm/mach-mvebu/cpu.c | 2 +
arch/arm/mach-mvebu/system-controller.c | 145 ++++++--
board/CZ.NIC/turris_atsha_otp.c | 27 +-
board/CZ.NIC/turris_common.c | 42 +++
board/CZ.NIC/turris_common.h | 10 +
board/CZ.NIC/turris_mox/turris_mox.c | 5 +-
board/CZ.NIC/turris_omnia/Makefile | 2 +-
board/CZ.NIC/turris_omnia/turris_omnia.c | 310 ++++++++++++-----
cmd/rng.c | 7 +-
configs/turris_omnia_defconfig | 6 +
drivers/gpio/Kconfig | 7 -
drivers/gpio/Makefile | 1 -
drivers/gpio/turris_omnia_mcu.c | 316 -----------------
drivers/misc/Kconfig | 11 +
drivers/misc/Makefile | 1 +
drivers/misc/turris_omnia_mcu.c | 411 +++++++++++++++++++++++
include/turris-omnia-mcu-interface.h | 248 ++++++++++++++
19 files changed, 1097 insertions(+), 482 deletions(-)
create mode 100644 board/CZ.NIC/turris_common.c
create mode 100644 board/CZ.NIC/turris_common.h
delete mode 100644 drivers/gpio/turris_omnia_mcu.c
create mode 100644 drivers/misc/turris_omnia_mcu.c
create mode 100644 include/turris-omnia-mcu-interface.h
--
2.43.2
next reply other threads:[~2024-04-04 7:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-04 7:50 Marek Behún [this message]
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 01/18] arm: mvebu: turris_omnia: Enable LTO by default on Turris Omnia Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 02/18] arm: mvebu: turris_omnia: Add header containing MCU command interface and use it Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 03/18] arm: mvebu: turris_{omnia, mox}: Don't print model two times Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 04/18] arm: mvebu: turris_omnia: Update MCU status and features reading Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 05/18] arm: mvebu: turris_omnia: Implement getting board information from MCU Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 06/18] arm: mvebu: turris_omnia: Print board ECDSA public key if available Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 07/18] arm: mvebu: turris_omnia: Disable Atmel SHA node if not present Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 08/18] arm: mvebu: spl: Do not build mvebu-reset in SPL Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 09/18] arm: mvebu: system-controller: Rework to use UCLASS_SYSCON Marek Behún
2024-04-04 7:50 ` [PATCH u-boot-mvebu v4 10/18] arm: mvebu: system-controller: Select mvebu-reset if DM_RESET && PCI_MVEBU Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 11/18] arm: mvebu: system-controller: Add support for SYSRESET Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 12/18] gpio: turris_omnia_mcu: Use byteorder conversion functions Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 13/18] gpio: turris_omnia_mcu: Update firmware features reading Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 14/18] gpio: turris_omnia_mcu: Add support for system power off via sysreset Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 15/18] arm: mvebu: turris_omnia: Enable poweroff command via sysreset in defconfig Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 16/18] cmd: rng: Print "Abort" on -EINTR Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 17/18] misc: turris_omnia_mcu: Add support for rng provided by MCU Marek Behún
2024-04-04 7:51 ` [PATCH u-boot-mvebu v4 18/18] arm: mvebu: turris_omnia: Enable rng command in defconfig Marek Behún
2024-04-04 12:04 ` [PATCH u-boot-mvebu v4 00/18] Turris Omnia - New board revision support Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240404075107.19636-1-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox