public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH u-boot-mvebu v4 09/18] arm: mvebu: system-controller: Rework to use UCLASS_SYSCON
Date: Thu,  4 Apr 2024 09:50:58 +0200	[thread overview]
Message-ID: <20240404075107.19636-10-kabel@kernel.org> (raw)
In-Reply-To: <20240404075107.19636-1-kabel@kernel.org>

The system-controller driver for 32-bit Armada is currently registered
as UCLASS_RESET, since it only provides enabling/disabling PCIe ports.

Rework it as UCLASS_SYSCON and bind mvebu-reset as a child device.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
---
 arch/arm/mach-mvebu/Kconfig             | 11 ++++
 arch/arm/mach-mvebu/Makefile            |  2 +-
 arch/arm/mach-mvebu/system-controller.c | 76 ++++++++++++++-----------
 3 files changed, 54 insertions(+), 35 deletions(-)

diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 2058c95ca2..62a2bc5958 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -18,6 +18,7 @@ config ARMADA_32BIT
 	select TOOLS_KWBIMAGE if SPL
 	select SPL_SYS_NO_VECTOR_TABLE if SPL
 	select ARCH_VERY_EARLY_INIT
+	select ARMADA_32BIT_SYSCON_RESET if DM_RESET
 
 # ARMv7 SoCs...
 config ARMADA_375
@@ -456,6 +457,16 @@ config SF_DEFAULT_MODE
 	default 0x0
 	depends on MVEBU_SPL_BOOT_DEVICE_SPI
 
+config ARMADA_32BIT_SYSCON_RESET
+	bool "Support Armada XP/375/38x/39x reset controller"
+	depends on ARMADA_32BIT
+	depends on DM_RESET
+	select REGMAP
+	select SYSCON
+	help
+	  Build support for Armada XP/375/38x/39x reset controller. This is
+	  needed for PCIe support.
+
 source "board/solidrun/clearfog/Kconfig"
 source "board/kobol/helios4/Kconfig"
 
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index ef790d97fe..d44ca3a0df 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o
 obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o
 obj-$(CONFIG_ARMADA_MSYS) += ../../../drivers/ddr/marvell/axp/xor.o
 
-obj-$(CONFIG_DM_RESET) += system-controller.o
+obj-$(CONFIG_ARMADA_32BIT_SYSCON_RESET) += system-controller.o
 
 ifdef CONFIG_ARMADA_38X
 obj-$(CONFIG_MVEBU_EFUSE) += efuse.o
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index 7cdde11cbd..c5c05922f2 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -1,19 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0+
-// (C) 2021 Pali Rohár <pali@kernel.org>
+/*
+ * Copyright (C) 2021 Pali Rohár <pali@kernel.org>
+ * Copyright (C) 2024 Marek Behún <kabel@kernel.org>
+ */
 
 #include <common.h>
 #include <dm.h>
+#include <dm/lists.h>
+#include <regmap.h>
 #include <reset-uclass.h>
+#include <syscon.h>
 #include <asm/io.h>
 
 #define MVEBU_SOC_CONTROL_1_REG 0x4
 
 #define MVEBU_PCIE_ID 0
 
-struct mvebu_reset_data {
-	void *base;
-};
-
 static int mvebu_reset_of_xlate(struct reset_ctl *rst,
 				struct ofnode_phandle_args *args)
 {
@@ -46,46 +48,33 @@ static int mvebu_reset_free(struct reset_ctl *rst)
 
 static int mvebu_reset_assert(struct reset_ctl *rst)
 {
-	struct mvebu_reset_data *data = dev_get_priv(rst->dev);
+	struct regmap *regmap = syscon_get_regmap(rst->dev->parent);
 
-	clrbits_32(data->base + MVEBU_SOC_CONTROL_1_REG, BIT(rst->data));
-	return 0;
+	return regmap_update_bits(regmap, MVEBU_SOC_CONTROL_1_REG,
+				  BIT(rst->data), 0);
 }
 
 static int mvebu_reset_deassert(struct reset_ctl *rst)
 {
-	struct mvebu_reset_data *data = dev_get_priv(rst->dev);
+	struct regmap *regmap = syscon_get_regmap(rst->dev->parent);
 
-	setbits_32(data->base + MVEBU_SOC_CONTROL_1_REG, BIT(rst->data));
-	return 0;
+	return regmap_update_bits(regmap, MVEBU_SOC_CONTROL_1_REG,
+				  BIT(rst->data), BIT(rst->data));
 }
 
 static int mvebu_reset_status(struct reset_ctl *rst)
 {
-	struct mvebu_reset_data *data = dev_get_priv(rst->dev);
+	struct regmap *regmap = syscon_get_regmap(rst->dev->parent);
+	uint val;
+	int ret;
 
-	return !(readl(data->base + MVEBU_SOC_CONTROL_1_REG) & BIT(rst->data));
-}
-
-static int mvebu_reset_of_to_plat(struct udevice *dev)
-{
-	struct mvebu_reset_data *data = dev_get_priv(dev);
+	ret = regmap_read(regmap, MVEBU_SOC_CONTROL_1_REG, &val);
+	if (ret < 0)
+		return ret;
 
-	data->base = dev_read_addr_ptr(dev);
-	if (!data->base)
-		return -EINVAL;
-
-	return 0;
+	return !(val & BIT(rst->data));
 }
 
-static const struct udevice_id mvebu_reset_of_match[] = {
-	{ .compatible = "marvell,armada-370-xp-system-controller" },
-	{ .compatible = "marvell,armada-375-system-controller" },
-	{ .compatible = "marvell,armada-380-system-controller" },
-	{ .compatible = "marvell,armada-390-system-controller" },
-	{ },
-};
-
 static const struct reset_ops mvebu_reset_ops = {
 	.of_xlate = mvebu_reset_of_xlate,
 	.request = mvebu_reset_request,
@@ -98,8 +87,27 @@ static const struct reset_ops mvebu_reset_ops = {
 U_BOOT_DRIVER(mvebu_reset) = {
 	.name = "mvebu-reset",
 	.id = UCLASS_RESET,
-	.of_match = mvebu_reset_of_match,
-	.of_to_plat = mvebu_reset_of_to_plat,
-	.priv_auto = sizeof(struct mvebu_reset_data),
 	.ops = &mvebu_reset_ops,
 };
+
+static int mvebu_syscon_bind(struct udevice *dev)
+{
+	/* bind also mvebu-reset, with the same ofnode */
+	return device_bind_driver_to_node(dev, "mvebu-reset", "mvebu-reset",
+					  dev_ofnode(dev), NULL);
+}
+
+static const struct udevice_id mvebu_syscon_of_match[] = {
+	{ .compatible = "marvell,armada-370-xp-system-controller" },
+	{ .compatible = "marvell,armada-375-system-controller" },
+	{ .compatible = "marvell,armada-380-system-controller" },
+	{ .compatible = "marvell,armada-390-system-controller" },
+	{ },
+};
+
+U_BOOT_DRIVER(mvebu_syscon) = {
+	.name = "mvebu-system-controller",
+	.id = UCLASS_SYSCON,
+	.of_match = mvebu_syscon_of_match,
+	.bind = mvebu_syscon_bind,
+};
-- 
2.43.2


  parent reply	other threads:[~2024-04-04  7:52 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-04  7:50 [PATCH u-boot-mvebu v4 00/18] Turris Omnia - New board revision support Marek Behún
2024-04-04  7:50 ` [PATCH u-boot-mvebu v4 01/18] arm: mvebu: turris_omnia: Enable LTO by default on Turris Omnia Marek Behún
2024-04-04  7:50 ` [PATCH u-boot-mvebu v4 02/18] arm: mvebu: turris_omnia: Add header containing MCU command interface and use it Marek Behún
2024-04-04  7:50 ` [PATCH u-boot-mvebu v4 03/18] arm: mvebu: turris_{omnia, mox}: Don't print model two times Marek Behún
2024-04-04  7:50 ` [PATCH u-boot-mvebu v4 04/18] arm: mvebu: turris_omnia: Update MCU status and features reading Marek Behún
2024-04-04  7:50 ` [PATCH u-boot-mvebu v4 05/18] arm: mvebu: turris_omnia: Implement getting board information from MCU Marek Behún
2024-04-04  7:50 ` [PATCH u-boot-mvebu v4 06/18] arm: mvebu: turris_omnia: Print board ECDSA public key if available Marek Behún
2024-04-04  7:50 ` [PATCH u-boot-mvebu v4 07/18] arm: mvebu: turris_omnia: Disable Atmel SHA node if not present Marek Behún
2024-04-04  7:50 ` [PATCH u-boot-mvebu v4 08/18] arm: mvebu: spl: Do not build mvebu-reset in SPL Marek Behún
2024-04-04  7:50 ` Marek Behún [this message]
2024-04-04  7:50 ` [PATCH u-boot-mvebu v4 10/18] arm: mvebu: system-controller: Select mvebu-reset if DM_RESET && PCI_MVEBU Marek Behún
2024-04-04  7:51 ` [PATCH u-boot-mvebu v4 11/18] arm: mvebu: system-controller: Add support for SYSRESET Marek Behún
2024-04-04  7:51 ` [PATCH u-boot-mvebu v4 12/18] gpio: turris_omnia_mcu: Use byteorder conversion functions Marek Behún
2024-04-04  7:51 ` [PATCH u-boot-mvebu v4 13/18] gpio: turris_omnia_mcu: Update firmware features reading Marek Behún
2024-04-04  7:51 ` [PATCH u-boot-mvebu v4 14/18] gpio: turris_omnia_mcu: Add support for system power off via sysreset Marek Behún
2024-04-04  7:51 ` [PATCH u-boot-mvebu v4 15/18] arm: mvebu: turris_omnia: Enable poweroff command via sysreset in defconfig Marek Behún
2024-04-04  7:51 ` [PATCH u-boot-mvebu v4 16/18] cmd: rng: Print "Abort" on -EINTR Marek Behún
2024-04-04  7:51 ` [PATCH u-boot-mvebu v4 17/18] misc: turris_omnia_mcu: Add support for rng provided by MCU Marek Behún
2024-04-04  7:51 ` [PATCH u-boot-mvebu v4 18/18] arm: mvebu: turris_omnia: Enable rng command in defconfig Marek Behún
2024-04-04 12:04 ` [PATCH u-boot-mvebu v4 00/18] Turris Omnia - New board revision support Stefan Roese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240404075107.19636-10-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox