[PATCH] imx93: Move SoC and lifeclycle information to debug level

Fabio Estevam
2024-04-15T21:57:29Z

From: Fabio Estevam <festevam@denx.de>

The following information printed on every boot is not very
helpful for the users:

SOC: 0xa0009300
LC: 0x40040

Move them to debug() level.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
board/freescale/imx93_evk/spl.c | 4 ++--
board/phytec/phycore_imx93/spl.c | 4 ++--
board/variscite/imx93_var_som/spl.c | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/board/freescale/imx93_evk/spl.c b/board/freescale/imx93_evk/spl.c
index 7331a20f94c8..6d5e110b2776 100644
--- a/board/freescale/imx93_evk/spl.c
+++ b/board/freescale/imx93_evk/spl.c
@@ -120,8 +120,8 @@ void board_init_f(ulong dummy)
if (ret) {
printf("Fail to init Sentinel API\n");
} else {
- printf("SOC: 0x%x\n", gd->arch.soc_rev);
- printf("LC: 0x%x\n", gd->arch.lifecycle);
+ debug("SOC: 0x%x\n", gd->arch.soc_rev);
+ debug("LC: 0x%x\n", gd->arch.lifecycle);
}

power_init_board();
diff --git a/board/phytec/phycore_imx93/spl.c b/board/phytec/phycore_imx93/spl.c
index f03bfee9ffa8..5efa38a14427 100644
--- a/board/phytec/phycore_imx93/spl.c
+++ b/board/phytec/phycore_imx93/spl.c
@@ -126,8 +126,8 @@ void board_init_f(ulong dummy)
if (ret) {
printf("Fail to init ELE API\n");
} else {
- printf("SOC: 0x%x\n", gd->arch.soc_rev);
- printf("LC: 0x%x\n", gd->arch.lifecycle);
+ debug("SOC: 0x%x\n", gd->arch.soc_rev);
+ debug("LC: 0x%x\n", gd->arch.lifecycle);
}

clock_init();
diff --git a/board/variscite/imx93_var_som/spl.c b/board/variscite/imx93_var_som/spl.c
index 71f346cf77bd..8852aea156b7 100644
--- a/board/variscite/imx93_var_som/spl.c
+++ b/board/variscite/imx93_var_som/spl.c
@@ -125,8 +125,8 @@ void board_init_f(ulong dummy)
if (ret) {
printf("Fail to init ELE API\n");
} else {
- printf("SOC: 0x%x\n", gd->arch.soc_rev);
- printf("LC: 0x%x\n", gd->arch.lifecycle);
+ debug("SOC: 0x%x\n", gd->arch.soc_rev);
+ debug("LC: 0x%x\n", gd->arch.lifecycle);
}
power_init_board();

--
2.34.1