[PATCH 2/3] ARM: dts: imx: Switch Ronetix iMX8MQ-CM to imx8mq-u-boot.dtsi

[Marek Vasut <marex@denx.de>]

Include imx8mq-u-boot.dtsi in the board -u-boot.dtsi to pull in binman
configuration instead of duplicating it in the board -u-boot.dtsi again.
Drop the duplicate binman configuration.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Cc: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: kernel@puri.sm
Cc: u-boot@dh-electronics.com
Cc: u-boot@lists.denx.de
---
 arch/arm/dts/imx8mq-cm-u-boot.dtsi | 111 +----------------------------
 1 file changed, 1 insertion(+), 110 deletions(-)

diff --git a/arch/arm/dts/imx8mq-cm-u-boot.dtsi b/arch/arm/dts/imx8mq-cm-u-boot.dtsi
index e23998f5aba..819501337e9 100644
--- a/arch/arm/dts/imx8mq-cm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-cm-u-boot.dtsi
@@ -3,11 +3,7 @@
  * Copyright 2019 NXP
  */
 
-/ {
-	binman: binman {
-		multiple-images;
-	};
-};
+#include "imx8mq-u-boot.dtsi"
 
 &pinctrl_uart1 {
 	bootph-pre-ram;
@@ -16,108 +12,3 @@
 &uart1 {
 	bootph-pre-ram;
 };
-
-&binman {
-	 u-boot-spl-ddr {
-		filename = "u-boot-spl-ddr.bin";
-		pad-byte = <0xff>;
-		align-size = <4>;
-		align = <4>;
-
-		u-boot-spl {
-			align-end = <4>;
-		};
-
-		ddr-1d-imem-fw {
-			filename = "lpddr4_pmu_train_1d_imem.bin";
-			type = "blob-ext";
-			align-end = <4>;
-		};
-
-		ddr-1d-dmem-fw {
-			filename = "lpddr4_pmu_train_1d_dmem.bin";
-			type = "blob-ext";
-			align-end = <4>;
-		};
-
-		ddr-2d-imem-fw {
-			filename = "lpddr4_pmu_train_2d_imem.bin";
-			type = "blob-ext";
-			align-end = <4>;
-		};
-
-		ddr-2d-dmem-fw {
-			filename = "lpddr4_pmu_train_2d_dmem.bin";
-			type = "blob-ext";
-			align-end = <4>;
-		};
-	};
-
-	flash {
-		mkimage {
-			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
-
-			blob {
-				filename = "u-boot-spl-ddr.bin";
-			};
-		};
-	};
-
-	itb {
-		filename = "u-boot.itb";
-
-		fit {
-			description = "Configuration to load ATF before U-Boot";
-			#address-cells = <1>;
-			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
-
-			images {
-				uboot {
-					description = "U-Boot (64-bit)";
-					type = "standalone";
-					arch = "arm64";
-					compression = "none";
-					load = <CONFIG_TEXT_BASE>;
-
-					uboot_blob: blob-ext {
-						filename = "u-boot-nodtb.bin";
-					};
-				};
-
-				atf {
-					description = "ARM Trusted Firmware";
-					type = "firmware";
-					arch = "arm64";
-					compression = "none";
-					load = <0x910000>;
-					entry = <0x910000>;
-
-					atf_blob: blob-ext {
-						filename = "bl31.bin";
-					};
-				};
-
-				fdt {
-					description = "NAME";
-					type = "flat_dt";
-					compression = "none";
-
-					uboot_fdt_blob: blob-ext {
-						filename = "u-boot.dtb";
-					};
-				};
-			};
-
-			configurations {
-				default = "conf";
-
-				conf {
-					description = "NAME";
-					firmware = "uboot";
-					loadables = "atf";
-					fdt = "fdt";
-				};
-			};
-		};
-	};
-};
-- 
2.43.0