From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Cc: anton.gres@ifm.com, ch@denx.de, Marek Vasut <marex@denx.de>,
"NXP i.MX U-Boot Team" <uboot-imx@nxp.com>,
Adam Ford <aford173@gmail.com>,
Alper Nebi Yasak <alpernebiyasak@gmail.com>,
Andrejs Cainikovs <andrejs.cainikovs@toradex.com>,
Angus Ainslie <angus@akkea.ca>,
Emanuele Ghidoli <emanuele.ghidoli@toradex.com>,
Fabio Estevam <festevam@gmail.com>,
Francesco Dolcini <francesco.dolcini@toradex.com>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Rasmus Villemoes <rasmus.villemoes@prevas.dk>,
Simon Glass <sjg@chromium.org>,
Stefan Eichenberger <stefan.eichenberger@toradex.com>,
Stefano Babic <sbabic@denx.de>,
Tim Harvey <tharvey@gateworks.com>, Tom Rini <trini@konsulko.com>,
kernel@puri.sm, u-boot@dh-electronics.com
Subject: [PATCH v2 3/4] ARM: dts: imx: Wrap i.MX8M binman SPL and FIT nodes in CST node if IMX_HAB enabled
Date: Fri, 3 May 2024 03:05:11 +0200 [thread overview]
Message-ID: <20240503010518.263458-3-marex@denx.de> (raw)
In-Reply-To: <20240503010518.263458-1-marex@denx.de>
In case CONFIG_IMX_HAB is enabled, extend the binman image description for
all of i.MX8M{Q,M,N,P} with CST wrapper node. This way, if CONFIG_IMX_HAB
is enabled, binman will be automatically used to sign SPL and fitImage.
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Cc: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: kernel@puri.sm
Cc: u-boot@dh-electronics.com
Cc: u-boot@lists.denx.de
---
V2: New patch
---
arch/arm/dts/imx8mm-u-boot.dtsi | 195 ++++++++++++++++-------------
arch/arm/dts/imx8mn-u-boot.dtsi | 209 ++++++++++++++++++--------------
arch/arm/dts/imx8mp-u-boot.dtsi | 172 ++++++++++++++------------
arch/arm/dts/imx8mq-u-boot.dtsi | 182 ++++++++++++++-------------
4 files changed, 424 insertions(+), 334 deletions(-)
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index b9b1193823a..c02e11def5f 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -54,126 +54,151 @@
};
#endif
- binman_imx_spl: nxp-imx8mimage {
- filename = "u-boot-spl-mkimage.bin";
- nxp,boot-from = "sd";
- nxp,rom-version = <1>;
+#ifdef CONFIG_IMX_HAB
+ nxp-imx8mcst@0 {
+ filename = "u-boot-spl-mkimage.signed.bin";
nxp,loader-address = <CONFIG_SPL_TEXT_BASE>;
+ nxp,unlock;
args; /* Needed by mkimage etype superclass */
+#endif
- section {
- align = <4>;
- align-size = <4>;
- filename = "u-boot-spl-ddr.bin";
- pad-byte = <0xff>;
-
- u-boot-spl {
- align-end = <4>;
- filename = "u-boot-spl.bin";
- };
+ binman_imx_spl: nxp-imx8mimage {
+ filename = "u-boot-spl-mkimage.bin";
+ nxp,boot-from = "sd";
+ nxp,rom-version = <1>;
+ nxp,loader-address = <CONFIG_SPL_TEXT_BASE>;
+ args; /* Needed by mkimage etype superclass */
+
+ section {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
- ddr-1d-imem-fw {
- filename = "lpddr4_pmu_train_1d_imem.bin";
- align-end = <4>;
- type = "blob-ext";
- };
+ ddr-1d-imem-fw {
+ filename = "lpddr4_pmu_train_1d_imem.bin";
+ align-end = <4>;
+ type = "blob-ext";
+ };
- ddr-1d-dmem-fw {
- filename = "lpddr4_pmu_train_1d_dmem.bin";
- align-end = <4>;
- type = "blob-ext";
- };
+ ddr-1d-dmem-fw {
+ filename = "lpddr4_pmu_train_1d_dmem.bin";
+ align-end = <4>;
+ type = "blob-ext";
+ };
- ddr-2d-imem-fw {
- filename = "lpddr4_pmu_train_2d_imem.bin";
- align-end = <4>;
- type = "blob-ext";
- };
+ ddr-2d-imem-fw {
+ filename = "lpddr4_pmu_train_2d_imem.bin";
+ align-end = <4>;
+ type = "blob-ext";
+ };
- ddr-2d-dmem-fw {
- filename = "lpddr4_pmu_train_2d_dmem.bin";
- align-end = <4>;
- type = "blob-ext";
+ ddr-2d-dmem-fw {
+ filename = "lpddr4_pmu_train_2d_dmem.bin";
+ align-end = <4>;
+ type = "blob-ext";
+ };
};
};
+#ifdef CONFIG_IMX_HAB
};
- binman_imx_fit: fit {
- description = "Configuration to load ATF before U-Boot";
-#ifndef CONFIG_IMX_HAB
- fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
-#endif
- fit,fdt-list = "of-list";
- #address-cells = <1>;
+ nxp-imx8mcst@1 {
+ filename = "u-boot-fit.signed.bin";
+ nxp,loader-address = <CONFIG_SPL_LOAD_FIT_ADDRESS>;
#ifdef CONFIG_FSPI_CONF_HEADER
offset = <0x58C00>;
#else
offset = <0x57c00>;
#endif
- images {
- uboot {
- arch = "arm64";
- compression = "none";
- description = "U-Boot (64-bit)";
- load = <CONFIG_TEXT_BASE>;
- type = "standalone";
+ args; /* Needed by mkimage etype superclass */
+#endif
- uboot-blob {
- filename = "u-boot-nodtb.bin";
- type = "blob-ext";
+ binman_imx_fit: fit {
+ description = "Configuration to load ATF before U-Boot";
+#ifndef CONFIG_IMX_HAB
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+#endif
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+#ifdef CONFIG_FSPI_CONF_HEADER
+ offset = <0x58C00>;
+#else
+ offset = <0x57c00>;
+#endif
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_TEXT_BASE>;
+ type = "standalone";
+
+ uboot-blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
};
- };
#ifndef CONFIG_ARMV8_PSCI
- atf {
- arch = "arm64";
- compression = "none";
- description = "ARM Trusted Firmware";
- entry = <0x920000>;
- load = <0x920000>;
- type = "firmware";
-
- atf-blob {
- filename = "bl31.bin";
- type = "atf-bl31";
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x920000>;
+ load = <0x920000>;
+ type = "firmware";
+
+ atf-blob {
+ filename = "bl31.bin";
+ type = "atf-bl31";
+ };
};
- };
#endif
- binman_fip: fip {
- arch = "arm64";
- compression = "none";
- description = "Trusted Firmware FIP";
- load = <0x40310000>;
- type = "firmware";
- };
+ binman_fip: fip {
+ arch = "arm64";
+ compression = "none";
+ description = "Trusted Firmware FIP";
+ load = <0x40310000>;
+ type = "firmware";
+ };
- @fdt-SEQ {
- compression = "none";
- description = "NAME";
- type = "flat_dt";
+ @fdt-SEQ {
+ compression = "none";
+ description = "NAME";
+ type = "flat_dt";
- uboot-fdt-blob {
- filename = "u-boot.dtb";
- type = "blob-ext";
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
};
};
- };
- configurations {
- default = "@config-DEFAULT-SEQ";
+ configurations {
+ default = "@config-DEFAULT-SEQ";
- @config-SEQ {
- description = "NAME";
- fdt = "fdt-SEQ";
- firmware = "uboot";
+ @config-SEQ {
+ description = "NAME";
+ fdt = "fdt-SEQ";
+ firmware = "uboot";
#ifndef CONFIG_ARMV8_PSCI
- loadables = "atf";
+ loadables = "atf";
#endif
+ };
};
};
+#ifdef CONFIG_IMX_HAB
};
+#endif
};
};
diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi
index c9fb33cfb73..732191f5205 100644
--- a/arch/arm/dts/imx8mn-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-u-boot.dtsi
@@ -103,147 +103,172 @@
};
#endif
- binman_imx_spl: nxp-imx8mimage {
- filename = "u-boot-spl-mkimage.bin";
- nxp,boot-from = "sd";
- nxp,rom-version = <2>;
+#ifdef CONFIG_IMX_HAB
+ nxp-imx8mcst@0 {
+ filename = "u-boot-spl-mkimage.signed.bin";
nxp,loader-address = <CONFIG_SPL_TEXT_BASE>;
+ nxp,unlock;
args; /* Needed by mkimage etype superclass */
+#endif
- section {
- filename = "u-boot-spl-ddr.bin";
- pad-byte = <0xff>;
- align-size = <4>;
- align = <4>;
-
- u-boot-spl {
- align-end = <4>;
- filename = "u-boot-spl.bin";
- };
+ binman_imx_spl: nxp-imx8mimage {
+ filename = "u-boot-spl-mkimage.bin";
+ nxp,boot-from = "sd";
+ nxp,rom-version = <2>;
+ nxp,loader-address = <CONFIG_SPL_TEXT_BASE>;
+ args; /* Needed by mkimage etype superclass */
+
+ section {
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+ align-size = <4>;
+ align = <4>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
- ddr-1d-imem-fw {
+ ddr-1d-imem-fw {
#ifdef CONFIG_IMX8M_LPDDR4
- filename = "lpddr4_pmu_train_1d_imem.bin";
+ filename = "lpddr4_pmu_train_1d_imem.bin";
#elif CONFIG_IMX8M_DDR4
- filename = "ddr4_imem_1d_201810.bin";
+ filename = "ddr4_imem_1d_201810.bin";
#else
- filename = "ddr3_imem_1d.bin";
+ filename = "ddr3_imem_1d.bin";
#endif
- type = "blob-ext";
- align-end = <4>;
- };
+ type = "blob-ext";
+ align-end = <4>;
+ };
- ddr-1d-dmem-fw {
+ ddr-1d-dmem-fw {
#ifdef CONFIG_IMX8M_LPDDR4
- filename = "lpddr4_pmu_train_1d_dmem.bin";
+ filename = "lpddr4_pmu_train_1d_dmem.bin";
#elif CONFIG_IMX8M_DDR4
- filename = "ddr4_dmem_1d_201810.bin";
+ filename = "ddr4_dmem_1d_201810.bin";
#else
- filename = "ddr3_dmem_1d.bin";
+ filename = "ddr3_dmem_1d.bin";
#endif
- type = "blob-ext";
- align-end = <4>;
- };
+ type = "blob-ext";
+ align-end = <4>;
+ };
#if defined(CONFIG_IMX8M_LPDDR4) || defined(CONFIG_IMX8M_DDR4)
- ddr-2d-imem-fw {
+ ddr-2d-imem-fw {
#ifdef CONFIG_IMX8M_LPDDR4
- filename = "lpddr4_pmu_train_2d_imem.bin";
+ filename = "lpddr4_pmu_train_2d_imem.bin";
#else
- filename = "ddr4_imem_2d_201810.bin";
+ filename = "ddr4_imem_2d_201810.bin";
#endif
- type = "blob-ext";
- align-end = <4>;
- };
+ type = "blob-ext";
+ align-end = <4>;
+ };
- ddr-2d-dmem-fw {
+ ddr-2d-dmem-fw {
#ifdef CONFIG_IMX8M_LPDDR4
- filename = "lpddr4_pmu_train_2d_dmem.bin";
+ filename = "lpddr4_pmu_train_2d_dmem.bin";
#else
- filename = "ddr4_dmem_2d_201810.bin";
+ filename = "ddr4_dmem_2d_201810.bin";
#endif
- type = "blob-ext";
- align-end = <4>;
- };
+ type = "blob-ext";
+ align-end = <4>;
+ };
#endif
+ };
};
+
+#ifdef CONFIG_IMX_HAB
};
- binman_imx_fit: fit {
- description = "Configuration to load ATF before U-Boot";
-#ifndef CONFIG_IMX_HAB
- fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
-#endif
- fit,fdt-list = "of-list";
- #address-cells = <1>;
+ nxp-imx8mcst@1 {
+ filename = "u-boot-fit.signed.bin";
+ nxp,loader-address = <CONFIG_SPL_LOAD_FIT_ADDRESS>;
#ifdef CONFIG_FSPI_CONF_HEADER
offset = <0x59000>;
#else
offset = <0x58000>;
#endif
+ args; /* Needed by mkimage etype superclass */
+#endif
- images {
- uboot {
- arch = "arm64";
- compression = "none";
- description = "U-Boot (64-bit)";
- load = <CONFIG_TEXT_BASE>;
- type = "standalone";
+ binman_imx_fit: fit {
+ description = "Configuration to load ATF before U-Boot";
+#ifndef CONFIG_IMX_HAB
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+#endif
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+#ifdef CONFIG_FSPI_CONF_HEADER
+ offset = <0x59000>;
+#else
+ offset = <0x58000>;
+#endif
- uboot-blob {
- filename = "u-boot-nodtb.bin";
- type = "blob-ext";
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_TEXT_BASE>;
+ type = "standalone";
+
+ uboot-blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
};
- };
#ifndef CONFIG_ARMV8_PSCI
- atf {
- arch = "arm64";
- compression = "none";
- description = "ARM Trusted Firmware";
- entry = <0x960000>;
- load = <0x960000>;
- type = "firmware";
-
- atf-blob {
- filename = "bl31.bin";
- type = "atf-bl31";
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x960000>;
+ load = <0x960000>;
+ type = "firmware";
+
+ atf-blob {
+ filename = "bl31.bin";
+ type = "atf-bl31";
+ };
};
- };
#endif
- binman_fip: fip {
- arch = "arm64";
- compression = "none";
- description = "Trusted Firmware FIP";
- load = <0x40310000>;
- type = "firmware";
- };
+ binman_fip: fip {
+ arch = "arm64";
+ compression = "none";
+ description = "Trusted Firmware FIP";
+ load = <0x40310000>;
+ type = "firmware";
+ };
- @fdt-SEQ {
- compression = "none";
- description = "NAME";
- type = "flat_dt";
+ @fdt-SEQ {
+ compression = "none";
+ description = "NAME";
+ type = "flat_dt";
- uboot-fdt-blob {
- filename = "u-boot.dtb";
- type = "blob-ext";
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
};
};
- };
- configurations {
- default = "@config-DEFAULT-SEQ";
+ configurations {
+ default = "@config-DEFAULT-SEQ";
- @config-SEQ {
- description = "NAME";
- fdt = "fdt-SEQ";
- firmware = "uboot";
+ @config-SEQ {
+ description = "NAME";
+ fdt = "fdt-SEQ";
+ firmware = "uboot";
#ifndef CONFIG_ARMV8_PSCI
- loadables = "atf";
+ loadables = "atf";
#endif
+ };
};
};
+#ifdef CONFIG_IMX_HAB
};
+#endif
};
};
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi
index 8b5ac3faf1c..f2655a4d0c8 100644
--- a/arch/arm/dts/imx8mp-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-u-boot.dtsi
@@ -86,110 +86,130 @@
section {
pad-byte = <0x00>;
- binman_imx_spl: nxp-imx8mimage {
- filename = "u-boot-spl-mkimage.bin";
- nxp,boot-from = "sd";
- nxp,rom-version = <2>;
+#ifdef CONFIG_IMX_HAB
+ nxp-imx8mcst@0 {
+ filename = "u-boot-spl-mkimage.signed.bin";
nxp,loader-address = <CONFIG_SPL_TEXT_BASE>;
+ nxp,unlock;
args; /* Needed by mkimage etype superclass */
+#endif
- section {
- filename = "u-boot-spl-ddr.bin";
- pad-byte = <0xff>;
- align-size = <4>;
- align = <4>;
-
- u-boot-spl {
- align-end = <4>;
- };
+ binman_imx_spl: nxp-imx8mimage {
+ filename = "u-boot-spl-mkimage.bin";
+ nxp,boot-from = "sd";
+ nxp,rom-version = <2>;
+ nxp,loader-address = <CONFIG_SPL_TEXT_BASE>;
+ args; /* Needed by mkimage etype superclass */
+
+ section {
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+ align-size = <4>;
+ align = <4>;
+
+ u-boot-spl {
+ align-end = <4>;
+ };
- ddr-1d-imem-fw {
- filename = "lpddr4_pmu_train_1d_imem_202006.bin";
- type = "blob-ext";
- align-end = <4>;
- };
+ ddr-1d-imem-fw {
+ filename = "lpddr4_pmu_train_1d_imem_202006.bin";
+ type = "blob-ext";
+ align-end = <4>;
+ };
- ddr-1d-dmem-fw {
- filename = "lpddr4_pmu_train_1d_dmem_202006.bin";
- type = "blob-ext";
- align-end = <4>;
- };
+ ddr-1d-dmem-fw {
+ filename = "lpddr4_pmu_train_1d_dmem_202006.bin";
+ type = "blob-ext";
+ align-end = <4>;
+ };
- ddr-2d-imem-fw {
- filename = "lpddr4_pmu_train_2d_imem_202006.bin";
- type = "blob-ext";
- align-end = <4>;
- };
+ ddr-2d-imem-fw {
+ filename = "lpddr4_pmu_train_2d_imem_202006.bin";
+ type = "blob-ext";
+ align-end = <4>;
+ };
- ddr-2d-dmem-fw {
- filename = "lpddr4_pmu_train_2d_dmem_202006.bin";
- type = "blob-ext";
- align-end = <4>;
+ ddr-2d-dmem-fw {
+ filename = "lpddr4_pmu_train_2d_dmem_202006.bin";
+ type = "blob-ext";
+ align-end = <4>;
+ };
};
};
+#ifdef CONFIG_IMX_HAB
};
- binman_imx_fit: fit {
- description = "Configuration to load ATF before U-Boot";
-#ifndef CONFIG_IMX_HAB
- fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
-#endif
- fit,fdt-list = "of-list";
- #address-cells = <1>;
+ nxp-imx8mcst@1 {
+ filename = "u-boot-fit.signed.bin";
+ nxp,loader-address = <CONFIG_SPL_LOAD_FIT_ADDRESS>;
offset = <0x58000>;
+ args; /* Needed by mkimage etype superclass */
+#endif
- images {
- uboot {
- description = "U-Boot (64-bit)";
- type = "standalone";
- arch = "arm64";
- compression = "none";
- load = <CONFIG_TEXT_BASE>;
-
- uboot_blob: blob-ext {
- filename = "u-boot-nodtb.bin";
+ binman_imx_fit: fit {
+ description = "Configuration to load ATF before U-Boot";
+#ifndef CONFIG_IMX_HAB
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+#endif
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+ offset = <0x58000>;
+
+ images {
+ uboot {
+ description = "U-Boot (64-bit)";
+ type = "standalone";
+ arch = "arm64";
+ compression = "none";
+ load = <CONFIG_TEXT_BASE>;
+
+ uboot_blob: blob-ext {
+ filename = "u-boot-nodtb.bin";
+ };
};
- };
#ifndef CONFIG_ARMV8_PSCI
- atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
- arch = "arm64";
- compression = "none";
- load = <0x970000>;
- entry = <0x970000>;
-
- atf_blob: atf-blob {
- filename = "bl31.bin";
- type = "atf-bl31";
+ atf {
+ description = "ARM Trusted Firmware";
+ type = "firmware";
+ arch = "arm64";
+ compression = "none";
+ load = <0x970000>;
+ entry = <0x970000>;
+
+ atf_blob: atf-blob {
+ filename = "bl31.bin";
+ type = "atf-bl31";
+ };
};
- };
#endif
- @fdt-SEQ {
- description = "NAME";
- type = "flat_dt";
- compression = "none";
+ @fdt-SEQ {
+ description = "NAME";
+ type = "flat_dt";
+ compression = "none";
- blob-ext {
- filename = "u-boot.dtb";
+ blob-ext {
+ filename = "u-boot.dtb";
+ };
};
};
- };
- configurations {
- default = "@config-DEFAULT-SEQ";
+ configurations {
+ default = "@config-DEFAULT-SEQ";
- @config-SEQ {
- description = "NAME";
- fdt = "fdt-SEQ";
- firmware = "uboot";
+ @config-SEQ {
+ description = "NAME";
+ fdt = "fdt-SEQ";
+ firmware = "uboot";
#ifndef CONFIG_ARMV8_PSCI
- loadables = "atf";
+ loadables = "atf";
#endif
+ };
};
};
+#ifdef CONFIG_IMX_HAB
};
+#endif
};
};
diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi
index 72da674d245..e1cd6f8996d 100644
--- a/arch/arm/dts/imx8mq-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-u-boot.dtsi
@@ -38,116 +38,136 @@
section {
pad-byte = <0x00>;
- binman_imx_spl: nxp-imx8mimage {
- filename = "u-boot-spl-mkimage.bin";
- nxp,boot-from = "sd";
- nxp,rom-version = <1>;
+#ifdef CONFIG_IMX_HAB
+ nxp-imx8mcst@0 {
+ filename = "u-boot-spl-mkimage.signed.bin";
nxp,loader-address = <CONFIG_SPL_TEXT_BASE>;
+ nxp,unlock;
args; /* Needed by mkimage etype superclass */
+#endif
- section {
- align = <4>;
- align-size = <4>;
- filename = "u-boot-spl-ddr.bin";
- pad-byte = <0xff>;
-
- u-boot-spl {
- align-end = <4>;
- filename = "u-boot-spl.bin";
- };
+ binman_imx_spl: nxp-imx8mimage {
+ filename = "u-boot-spl-mkimage.bin";
+ nxp,boot-from = "sd";
+ nxp,rom-version = <1>;
+ nxp,loader-address = <CONFIG_SPL_TEXT_BASE>;
+ args; /* Needed by mkimage etype superclass */
+
+ section {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
- ddr-1d-imem-fw {
- filename = "lpddr4_pmu_train_1d_imem.bin";
- align-end = <4>;
- type = "blob-ext";
- };
+ ddr-1d-imem-fw {
+ filename = "lpddr4_pmu_train_1d_imem.bin";
+ align-end = <4>;
+ type = "blob-ext";
+ };
- ddr-1d-dmem-fw {
- filename = "lpddr4_pmu_train_1d_dmem.bin";
- align-end = <4>;
- type = "blob-ext";
- };
+ ddr-1d-dmem-fw {
+ filename = "lpddr4_pmu_train_1d_dmem.bin";
+ align-end = <4>;
+ type = "blob-ext";
+ };
- ddr-2d-imem-fw {
- filename = "lpddr4_pmu_train_2d_imem.bin";
- align-end = <4>;
- type = "blob-ext";
- };
+ ddr-2d-imem-fw {
+ filename = "lpddr4_pmu_train_2d_imem.bin";
+ align-end = <4>;
+ type = "blob-ext";
+ };
- ddr-2d-dmem-fw {
- filename = "lpddr4_pmu_train_2d_dmem.bin";
- align-end = <4>;
- type = "blob-ext";
- };
+ ddr-2d-dmem-fw {
+ filename = "lpddr4_pmu_train_2d_dmem.bin";
+ align-end = <4>;
+ type = "blob-ext";
+ };
- signed-hdmi-imx8m {
- filename = "signed_hdmi_imx8m.bin";
- type = "blob-ext";
+ signed-hdmi-imx8m {
+ filename = "signed_hdmi_imx8m.bin";
+ type = "blob-ext";
+ };
};
};
+#ifdef CONFIG_IMX_HAB
};
- binman_imx_fit: fit {
- description = "Configuration to load ATF before U-Boot";
+ nxp-imx8mcst@1 {
+ filename = "u-boot-fit.signed.bin";
+ nxp,loader-address = <CONFIG_SPL_LOAD_FIT_ADDRESS>;
+ offset = <0x58000>;
+ args; /* Needed by mkimage etype superclass */
+#endif
+
+ binman_imx_fit: fit {
+ description = "Configuration to load ATF before U-Boot";
#ifndef CONFIG_IMX_HAB
- fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
#endif
- #address-cells = <1>;
-
- images {
- uboot {
- arch = "arm64";
- compression = "none";
- description = "U-Boot (64-bit)";
- load = <CONFIG_TEXT_BASE>;
- type = "standalone";
-
- uboot-blob {
- filename = "u-boot-nodtb.bin";
- type = "blob-ext";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_TEXT_BASE>;
+ type = "standalone";
+
+ uboot-blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
};
- };
#ifndef CONFIG_ARMV8_PSCI
- atf {
- arch = "arm64";
- compression = "none";
- description = "ARM Trusted Firmware";
- entry = <0x910000>;
- load = <0x910000>;
- type = "firmware";
-
- atf-blob {
- filename = "bl31.bin";
- type = "blob-ext";
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x910000>;
+ load = <0x910000>;
+ type = "firmware";
+
+ atf-blob {
+ filename = "bl31.bin";
+ type = "blob-ext";
+ };
};
- };
#endif
- fdt {
- compression = "none";
- description = "NAME";
- type = "flat_dt";
+ fdt {
+ compression = "none";
+ description = "NAME";
+ type = "flat_dt";
- uboot-fdt-blob {
- filename = "u-boot.dtb";
- type = "blob-ext";
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
};
};
- };
- configurations {
- default = "conf";
+ configurations {
+ default = "conf";
- conf {
- description = "NAME";
- fdt = "fdt";
- firmware = "uboot";
+ conf {
+ description = "NAME";
+ fdt = "fdt";
+ firmware = "uboot";
#ifndef CONFIG_ARMV8_PSCI
- loadables = "atf";
+ loadables = "atf";
#endif
+ };
};
};
+#ifdef CONFIG_IMX_HAB
};
+#endif
};
};
--
2.43.0
next prev parent reply other threads:[~2024-05-03 1:06 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-03 1:05 [PATCH v2 1/4] binman: Add nxp_imx8mcst etype for i.MX8M flash.bin signing Marek Vasut
2024-05-03 1:05 ` [PATCH v2 2/4] ARM: dts: imx: Introduce SPL and FIT labels to i.MX8M DTs binman nodes Marek Vasut
2024-05-03 1:05 ` Marek Vasut [this message]
2024-05-03 1:05 ` [PATCH v2 4/4] imx: hab: Use nxp_imx8mcst etype for i.MX8M flash.bin signing Marek Vasut
2024-05-14 18:34 ` Tim Harvey
2024-05-14 20:23 ` Marek Vasut
2024-05-15 22:16 ` Tim Harvey
2024-05-15 22:31 ` Tim Harvey
2024-05-16 1:53 ` Marek Vasut
2024-05-16 15:31 ` Tim Harvey
2024-05-06 11:52 ` [PATCH v2 1/4] binman: Add " Francesco Dolcini
2024-05-06 15:21 ` Marek Vasut
2024-05-07 13:06 ` [PATCH] imx: hab: add documentation about the required keys/certs Claudius Heine
2024-05-07 13:28 ` Marek Vasut
2024-05-08 7:23 ` Claudius Heine
2024-05-13 3:46 ` Marek Vasut
2024-05-14 18:50 ` Tim Harvey
2024-05-15 22:46 ` Tim Harvey
2024-05-16 8:25 ` Claudius Heine
2024-05-16 9:50 ` Rasmus Villemoes
2024-05-16 11:27 ` Claudius Heine
2024-05-16 8:36 ` [PATCH v2] " Claudius Heine
2024-05-18 8:30 ` Heinrich Schuchardt
2024-05-24 16:27 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240503010518.263458-3-marex@denx.de \
--to=marex@denx.de \
--cc=aford173@gmail.com \
--cc=alpernebiyasak@gmail.com \
--cc=andrejs.cainikovs@toradex.com \
--cc=angus@akkea.ca \
--cc=anton.gres@ifm.com \
--cc=ch@denx.de \
--cc=emanuele.ghidoli@toradex.com \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=kernel@puri.sm \
--cc=marcel.ziswiler@toradex.com \
--cc=rasmus.villemoes@prevas.dk \
--cc=sbabic@denx.de \
--cc=sjg@chromium.org \
--cc=stefan.eichenberger@toradex.com \
--cc=tharvey@gateworks.com \
--cc=trini@konsulko.com \
--cc=u-boot@dh-electronics.com \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox