Re: [PATCH v4] test/py: net_boot: Add test cases for net boot

[Tom Rini <trini@konsulko.com>]

[-- Attachment #1: Type: text/plain, Size: 1952 bytes --]

On Fri, May 03, 2024 at 05:39:46PM +0530, Love Kumar wrote:

> Add tests for booting image using tftpboot/pxe boot commands, tftpboot
> boot case loads the FIT image into DDR and boots using bootm command
> whereas pxe boot cases downloads the pxe configuration file from the
> TFTP server and interprets it to boot the images mentioned in the pxe
> configurations file.
> This test relies on boardenv_* containing configuration values including
> the parameter 'pattern'. tftpboot/pxe boot cases boots the Linux till the
> boot log pattern value is matched. For example, if the parameter
> 'pattern' is defined as 'login:', it will boot till login prompt.
> 
> Signed-off-by: Love Kumar <love.kumar@amd.com>

I'm not quite sure where the problem is, next. After enabling FIT image
support in my build so I can use the image I have on hand:
U-Boot> tftpboot 200000 v6.6/image.fit.nocomp
Waiting for Ethernet connection... done.
Using smsc95xx_eth device
TFTP from server 192.168.1.10; our IP address is 192.168.1.100
Filename 'v6.6/image.fit.nocomp'.
Load address: 0x200000
Loading: ##################################################  82 MiB
         3.2 MiB/s
done
Bytes transferred = 85984256 (5200400 hex)
U-Boot> U-Boot> crc32 200000 $filesize
CRC32 for 00200000 ... 054003ff ==> 754c839a
U-Boot> U-Boot> bootm 200000
## Loading kernel from FIT Image at 00200000 ...
Could not find configuration node
ERROR -2: can't get kernel image!
U-Boot>

And in u_boot_boardenv_rpi_arm64.py:
env__tftp_boot_test_skip = False

env__net_tftp_bootable_file = {
    'fn': 'v6.6/image.fit.nocomp',
    'addr': 0x00200000,
    'size': 85984256,
    'crc32': '754c839a',
    'pattern': 'Linux',
    'config': 'conf-852',
}

But it's not trying to boot conf-852 but instead just passing the
address. This image lacks a default config, which your example has and I
think is why the tests work in your case.

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]