[PATCH v1 2/7] phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver

[Minda Chen <minda.chen@starfivetech.com>]

Add Starfive JH7110 USB 2.0 PHY driver, which is generic
PHY driver.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
 drivers/phy/Kconfig                    |   1 +
 drivers/phy/Makefile                   |   1 +
 drivers/phy/starfive/Kconfig           |  13 +++
 drivers/phy/starfive/Makefile          |   6 ++
 drivers/phy/starfive/phy-jh7110-usb2.c | 135 +++++++++++++++++++++++++
 5 files changed, 156 insertions(+)
 create mode 100644 drivers/phy/starfive/Kconfig
 create mode 100644 drivers/phy/starfive/Makefile
 create mode 100644 drivers/phy/starfive/phy-jh7110-usb2.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 8f767877e7..0c4d63a01f 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -307,5 +307,6 @@ source "drivers/phy/cadence/Kconfig"
 source "drivers/phy/ti/Kconfig"
 source "drivers/phy/qcom/Kconfig"
 source "drivers/phy/renesas/Kconfig"
+source "drivers/phy/starfive/Kconfig"
 
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 7a2b764492..6ac867350c 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -44,3 +44,4 @@ obj-y += cadence/
 obj-y += ti/
 obj-y += qcom/
 obj-y += renesas/
+obj-y += starfive/
diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
new file mode 100644
index 0000000000..5d78fde12e
--- /dev/null
+++ b/drivers/phy/starfive/Kconfig
@@ -0,0 +1,13 @@
+#
+# Phy drivers for Starfive platforms
+#
+
+menu "Starfive PHY driver"
+
+config PHY_STARFIVE_JH7110_USB2
+	bool "Starfive JH7110 USB 2.0 PHY driver"
+	select PHY
+	help
+	  Enable this to support the Starfive USB 2.0 PHY.
+
+endmenu
diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
new file mode 100644
index 0000000000..a405a75e34
--- /dev/null
+++ b/drivers/phy/starfive/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2023 Starfive
+#
+
+obj-$(CONFIG_PHY_STARFIVE_JH7110_USB2)	+= phy-jh7110-usb2.o
diff --git a/drivers/phy/starfive/phy-jh7110-usb2.c b/drivers/phy/starfive/phy-jh7110-usb2.c
new file mode 100644
index 0000000000..ffbd96d721
--- /dev/null
+++ b/drivers/phy/starfive/phy-jh7110-usb2.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * StarFive JH7110 USB 2.0 PHY driver
+ *
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ * Author: Minda Chen <minda.chen@starfivetech.com>
+ */
+
+#include <asm/io.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <errno.h>
+#include <generic-phy.h>
+#include <regmap.h>
+#include <soc.h>
+#include <syscon.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+
+#define USB_LS_KEEPALIVE_OFF		0x4
+#define USB_LS_KEEPALIVE_ENABLE		BIT(4)
+
+struct jh7110_usb2_phy {
+	struct phy *phy;
+	void __iomem *regs;
+	struct clk *usb_125m_clk;
+	struct clk *app_125m;
+	enum phy_mode mode;
+};
+
+static void usb2_set_ls_keepalive(struct jh7110_usb2_phy *phy, bool set)
+{
+	unsigned int val;
+
+	/* Host mode enable the LS speed keep-alive signal */
+	val = readl(phy->regs + USB_LS_KEEPALIVE_OFF);
+	if (set)
+		val |= USB_LS_KEEPALIVE_ENABLE;
+	else
+		val &= ~USB_LS_KEEPALIVE_ENABLE;
+
+	writel(val, phy->regs + USB_LS_KEEPALIVE_OFF);
+}
+
+static int usb2_phy_set_mode(struct phy *_phy,
+			     enum phy_mode mode, int submode)
+{
+	struct udevice *dev = _phy->dev;
+	struct jh7110_usb2_phy *phy = dev_get_priv(dev);
+
+	switch (mode) {
+	case PHY_MODE_USB_HOST:
+	case PHY_MODE_USB_DEVICE:
+	case PHY_MODE_USB_OTG:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (mode != phy->mode) {
+		dev_dbg(dev, "Changing phy to %d\n", mode);
+		phy->mode = mode;
+		usb2_set_ls_keepalive(phy, (mode != PHY_MODE_USB_DEVICE));
+	}
+
+	return 0;
+}
+
+static int jh7110_usb2_phy_init(struct phy *_phy)
+{
+	struct udevice *dev = _phy->dev;
+	struct jh7110_usb2_phy *phy = dev_get_priv(dev);
+	int ret;
+
+	ret = clk_prepare_enable(phy->app_125m);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int jh7110_usb2_phy_exit(struct phy *_phy)
+{
+	struct udevice *dev = _phy->dev;
+	struct jh7110_usb2_phy *phy = dev_get_priv(dev);
+
+	clk_disable_unprepare(phy->app_125m);
+
+	return 0;
+}
+
+struct phy_ops jh7110_usb2_phy_ops = {
+	.init     = jh7110_usb2_phy_init,
+	.exit     = jh7110_usb2_phy_exit,
+	.set_mode = usb2_phy_set_mode,
+};
+
+int jh7110_usb2_phy_probe(struct udevice *dev)
+{
+	struct jh7110_usb2_phy *phy = dev_get_priv(dev);
+
+	phy->regs = dev_read_addr_ptr(dev);
+
+	if (!phy->regs)
+		return -EINVAL;
+
+	phy->usb_125m_clk = devm_clk_get(dev, "125m");
+	if (IS_ERR(phy->usb_125m_clk)) {
+		dev_err(dev, "Failed to get 125m clock\n");
+		return PTR_ERR(phy->usb_125m_clk);
+	}
+
+	phy->app_125m = devm_clk_get(dev, "app_125m");
+	if (IS_ERR(phy->app_125m)) {
+		dev_err(dev, "Failed to get app 125m clock\n");
+		return PTR_ERR(phy->app_125m);
+	}
+
+	return 0;
+}
+
+static const struct udevice_id jh7110_usb2_phy[] = {
+	{ .compatible = "starfive,jh7110-usb-phy"},
+	{},
+};
+
+U_BOOT_DRIVER(jh7110_usb2_phy) = {
+	.name = "jh7110_usb2_phy",
+	.id = UCLASS_PHY,
+	.of_match = jh7110_usb2_phy,
+	.probe = jh7110_usb2_phy_probe,
+	.ops = &jh7110_usb2_phy_ops,
+	.priv_auto	= sizeof(struct jh7110_usb2_phy),
+};
-- 
2.17.1