Re: [PATCH v3] tpm: display warning if using gpio reset with TPM

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hi Jorge,

...

> > >  - board with no reset gpio
> > > u-boot=> tpm init && tpm info
> > > tpm@1 v2.0: VendorID 0x1114, DeviceID 0x3205, RevisionID 0x01 [open]
> > >  - board with a reset gpio
> > > u-boot=> tpm init && tpm info
> > > tpm@1: TPM gpio reset should not be used on secure production devices
> > > tpm@1 v2.0: VendorID 0x1114, DeviceID 0x3205, RevisionID 0x01 [open]
> > > 
> > > [1] https://trustedcomputinggroup.org/wp-content/uploads/TCG_PCClientTPMInterfaceSpecification_TIS__1-3_27_03212013.pdf
> > > 
> > > Signed-off-by: Tim Harvey <tharvey@gateworks.com>  
> > 
> > Looks way cleaner, thanks.
> > 
> > Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > 
> > Miquèl  
> 
> nice. if needed
> 
> Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>

You cannot send your SoB like this. SoB means you are carrying some
code which complies with the license, etc.

Either you were part of the original writing and want to be credited
for that (you can be the author and first SoB, or suggest Tim to use
Co-developed-by). Or you reviewed the change (Reviewed-by), you tested
the change (Tested-by), or you are maintainer/responsible for some part
that is touched and you agree with the change (Acked-by).

Thanks,
Miquèl