[PATCH 0/2 V2] RGXX3: Set boot order for mmc0 first

[Chris Morgan <macroalpha82@gmail.com>]

From: Chris Morgan <macromorgan@hotmail.com>

Set the rgxx3 device to boot from mmc0 first. This serves as a fallback
to allow us to recover from a bad U-Boot (or later) stage in a worst
case scenario. The code for an ADC button appears to have broke some
board revisions; this solution is much simpler and allows users to
continue to program the adc button as they see fit.

Changes from V1:
 - Removed sdmmc1, as long as we have sdmmc0 we should be safe.
 - Clarified that the expectation is that we can prevent a bad
   U-Boot stage with a valid FIT signature by looking at removable
   storage first.

Chris Morgan (2):
  Revert "board: rockchip: Add early ADC button detect for RGxx3"
  board: rockchip: rgxx3: Use sdmmc0 as first device

 .../arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi |  2 +-
 board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c    | 64 -------------------
 2 files changed, 1 insertion(+), 65 deletions(-)

-- 
2.34.1