[PATCH V7 7/7] arm: dts: phycore-am62x: Package TIFS Stub

[Dhruva Gole <d-gole@ti.com>]

Add support for packaging the TIFS Stub as it's required for basic Low
Power Modes like Deep Sleep.
The reason it is packaged using binman and not inherently as part of the
DM firmware is because for HS devices, customer owns the customer key
and only customer has access to it.
DM is release by TI, Since TI doesn't have access to the customer key it
cannot have a component that is signed by customer key.
Hence, it's left as part of binman to be signed and packaged.

While at it, also make sure it's documented in phycore-am62x

Signed-off-by: Dhruva Gole <d-gole@ti.com>
---
 arch/arm/dts/k3-am625-phycore-som-binman.dtsi | 101 +++++++++++++++++-
 doc/board/phytec/phycore-am62x.rst            |   2 +-
 2 files changed, 100 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi
index dbee4aa8d8a5..0961ca66f280 100644
--- a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi
+++ b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi
@@ -150,12 +150,107 @@
 			filename = "ti-dm/am62xx/ipc_echo_testb_mcu1_0_release_strip.xer5f";
 		};
 	};
+
+	tifsstub-hs {
+		filename = "tifsstub.bin_hs";
+		ti-secure-rom {
+			content = <&tifsstub_hs_cert>;
+			core = "secure";
+			load = <0x40000>;
+			sw-rev = <CONFIG_K3_X509_SWRV>;
+			keyfile = "custMpk.pem";
+			countersign;
+			tifsstub;
+		};
+		tifsstub_hs_cert: tifsstub-hs-cert.bin {
+			filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-cert.bin";
+			type = "blob-ext";
+			optional;
+		};
+		tifsstub_hs_enc: tifsstub-hs-enc.bin {
+			filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-enc.bin";
+			type = "blob-ext";
+			optional;
+		};
+	};
+
+	tifsstub-fs {
+		filename = "tifsstub.bin_fs";
+		tifsstub_fs_cert: tifsstub-fs-cert.bin {
+			filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-cert.bin";
+			type = "blob-ext";
+			optional;
+		};
+		tifsstub_fs_enc: tifsstub-fs-enc.bin {
+			filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-enc.bin";
+			type = "blob-ext";
+			optional;
+		};
+
+	};
+
+	tifsstub-gp {
+		filename = "tifsstub.bin_gp";
+		ti-secure-rom {
+			content = <&tifsstub_gp>;
+			core = "secure";
+			load = <0x60000>;
+			sw-rev = <CONFIG_K3_X509_SWRV>;
+			keyfile = "ti-degenerate-key.pem";
+			tifsstub;
+		};
+		tifsstub_gp: tifsstub-gp.bin {
+			filename = "ti-sysfw/ti-fs-stub-firmware-am62x-gp.bin";
+			type = "blob-ext";
+			optional;
+		};
+	};
+
+
 	ti-spl {
 		insert-template = <&ti_spl_template>;
 
 		fit {
 
 			images {
+				tifsstub-hs {
+					description = "TIFSSTUB";
+					type = "firmware";
+					arch = "arm32";
+					compression = "none";
+					os = "tifsstub-hs";
+					load = <0x9dc00000>;
+					entry = <0x9dc00000>;
+					blob-ext {
+						filename = "tifsstub.bin_hs";
+					};
+				};
+
+				tifsstub-fs {
+					description = "TIFSSTUB";
+					type = "firmware";
+					arch = "arm32";
+					compression = "none";
+					os = "tifsstub-fs";
+					load = <0x9dc00000>;
+					entry = <0x9dc00000>;
+					blob-ext {
+						filename = "tifsstub.bin_fs";
+					};
+				};
+
+				tifsstub-gp {
+					description = "TIFSSTUB";
+					type = "firmware";
+					arch = "arm32";
+					compression = "none";
+					os = "tifsstub-gp";
+					load = <0x9dc00000>;
+					entry = <0x9dc00000>;
+					blob-ext {
+						filename = "tifsstub.bin_gp";
+					};
+				};
 				dm {
 					ti-secure {
 						content = <&dm>;
@@ -187,7 +282,8 @@
 				conf-0 {
 					description = "k3-am625-phyboard-lyra-rdk";
 					firmware = "atf";
-					loadables = "tee", "dm", "spl";
+					loadables = "tee", "tifsstub-hs", "tifsstub-fs",
+						    "tifsstub-gp", "dm", "spl";
 					fdt = "fdt-0";
 				};
 			};
@@ -266,7 +362,8 @@
 				conf-0 {
 					description = "k3-am625-phyboard-lyra-rdk";
 					firmware = "atf";
-					loadables = "tee", "dm", "spl";
+					loadables = "tee", "tifsstub-hs", "tifsstub-fs",
+						    "tifsstub-gp", "dm", "spl";
 					fdt = "fdt-0";
 				};
 			};
diff --git a/doc/board/phytec/phycore-am62x.rst b/doc/board/phytec/phycore-am62x.rst
index af24acf9aac4..56c1fd8354b4 100644
--- a/doc/board/phytec/phycore-am62x.rst
+++ b/doc/board/phytec/phycore-am62x.rst
@@ -32,7 +32,7 @@ Sources
 
 .. include::  ../ti/k3.rst
     :start-after: .. k3_rst_include_start_boot_firmwares
-    :end-before: .. k3_rst_include_end_boot_firmwares
+    :end-before: .. k3_rst_include_end_tifsstub
 
 Build procedure
 ---------------
-- 
2.34.1