[PATCH 5/9] sunxi: H616: DRAM: Adjust configuration procedure

[Chris Morgan <macroalpha82@gmail.com>]

From: Jernej Skrabec <jernej.skrabec@gmail.com>

When comparing configuration procedure to vendor driver, I noticed that
one command was out of order and that some delays were missing.

Fix that.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
---
 arch/arm/mach-sunxi/dram_sun50i_h616.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-sunxi/dram_sun50i_h616.c b/arch/arm/mach-sunxi/dram_sun50i_h616.c
index abb8ee760b..aec561cc94 100644
--- a/arch/arm/mach-sunxi/dram_sun50i_h616.c
+++ b/arch/arm/mach-sunxi/dram_sun50i_h616.c
@@ -1025,12 +1025,16 @@ static bool mctl_phy_init(const struct dram_para *para,
 		clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x14c, 0xe0, 0x20);
 	}
 
+	clrbits_le32(&mctl_com->unk_0x500, 0x200);
+	udelay(1);
+
 	clrbits_le32(SUNXI_DRAM_PHY0_BASE + 0x14c, 8);
 
 	mctl_await_completion((u32 *)(SUNXI_DRAM_PHY0_BASE + 0x180), 4, 4);
 
+	udelay(1000);
+
 	writel(0x37, SUNXI_DRAM_PHY0_BASE + 0x58);
-	clrbits_le32(&mctl_com->unk_0x500, 0x200);
 
 	writel(0, &mctl_ctl->swctl);
 	setbits_le32(&mctl_ctl->dfimisc, 1);
@@ -1049,6 +1053,8 @@ static bool mctl_phy_init(const struct dram_para *para,
 	mctl_await_completion(&mctl_ctl->swstat, 1, 1);
 	mctl_await_completion(&mctl_ctl->statr, 3, 1);
 
+	udelay(200);
+
 	writel(0, &mctl_ctl->swctl);
 	clrbits_le32(&mctl_ctl->dfimisc, 1);
 
@@ -1292,8 +1298,10 @@ static bool mctl_ctrl_init(const struct dram_para *para,
 	setbits_le32(&mctl_ctl->clken, BIT(8));
 
 	clrsetbits_le32(&mctl_com->unk_0x500, BIT(24), 0x300);
+	udelay(1);
 	/* this write seems to enable PHY MMIO region */
 	setbits_le32(&mctl_com->unk_0x500, BIT(24));
+	udelay(1);
 
 	if (!mctl_phy_init(para, config))
 		return false;
-- 
2.34.1