From: FUKAUMI Naoki <naoki@radxa.com>
To: u-boot@lists.denx.de
Cc: sjg@chromium.org, philipp.tomsich@vrull.eu,
kever.yang@rock-chips.com, banglang.huang@foxmail.com,
jonas@kwiboo.se, jagan@amarulasolutions.com,
gajjar04akash@gmail.com, eugen.hristev@collabora.com,
chris.obbard@collabora.com, FUKAUMI Naoki <naoki@radxa.com>
Subject: [PATCH 2/2] arm: dts: rockchip: turn LEDs on at boot for Radxa boards
Date: Thu, 8 Aug 2024 18:27:43 +0900 [thread overview]
Message-ID: <20240808092743.1508-2-naoki@radxa.com> (raw)
In-Reply-To: <20240808092743.1508-1-naoki@radxa.com>
Basically, Radxa's boards are intended to turn LEDs on at U-Boot.
add `default-state = "on"` to u-boot.dtsi.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
---
.../arm/dts/rk3328-rock-pi-e-base-u-boot.dtsi | 6 +++++
arch/arm/dts/rk3399-rock-4c-plus-u-boot.dtsi | 25 ++++++++++++++++++-
arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi | 8 ++++++
arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi | 8 ++++++
arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi | 23 +++++++++++++++++
arch/arm/dts/rk3568-rock-3a-u-boot.dtsi | 8 ++++++
arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 8 ++++++
arch/arm/dts/rk3588s-rock-5a-u-boot.dtsi | 8 ++++++
8 files changed, 93 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/rk3328-rock-pi-e-base-u-boot.dtsi b/arch/arm/dts/rk3328-rock-pi-e-base-u-boot.dtsi
index 39bb66c4fcb..a30adb0be98 100644
--- a/arch/arm/dts/rk3328-rock-pi-e-base-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-rock-pi-e-base-u-boot.dtsi
@@ -6,6 +6,12 @@
#include "rk3328-u-boot.dtsi"
/ {
+ leds {
+ led-0 {
+ default-state = "on";
+ };
+ };
+
smbios {
compatible = "u-boot,sysinfo-smbios";
diff --git a/arch/arm/dts/rk3399-rock-4c-plus-u-boot.dtsi b/arch/arm/dts/rk3399-rock-4c-plus-u-boot.dtsi
index 5ec15a845c1..614e4ce0fa8 100644
--- a/arch/arm/dts/rk3399-rock-4c-plus-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-rock-4c-plus-u-boot.dtsi
@@ -2,7 +2,20 @@
/*
* Copyright (c) 2023 Radxa Limited
*/
-#include "rk3399-rock-pi-4-u-boot.dtsi"
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+ leds {
+ led-0 {
+ default-state = "on";
+ };
+
+ led-1 {
+ default-state = "on";
+ };
+ };
+};
&pcfg_pull_none_18ma {
bootph-pre-ram;
@@ -14,6 +27,12 @@
bootph-some-ram;
};
+&sdhci {
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+};
+
&spi1 {
status = "okay";
@@ -25,3 +44,7 @@
spi-max-frequency = <10000000>;
};
};
+
+&vdd_log {
+ regulator-init-microvolt = <950000>;
+};
diff --git a/arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi b/arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi
index b3bfc77f756..4861574636e 100644
--- a/arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi
@@ -6,6 +6,14 @@
#include "rk3399-u-boot.dtsi"
#include "rk3399-sdram-lpddr4-100.dtsi"
+/ {
+ leds {
+ led-0 {
+ default-state = "on";
+ };
+ };
+};
+
&sdhci {
cap-mmc-highspeed;
mmc-ddr-1_8v;
diff --git a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
index e0e501deccf..412f9e06aff 100644
--- a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
+++ b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
@@ -5,6 +5,14 @@
#include "rk356x-u-boot.dtsi"
+/ {
+ leds {
+ led-1 {
+ default-state = "on";
+ };
+ };
+};
+
&sdhci {
cap-mmc-highspeed;
};
diff --git a/arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi b/arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi
index 74755a44eae..efeab626d8a 100644
--- a/arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi
@@ -2,6 +2,29 @@
#include "rk356x-u-boot.dtsi"
+/ {
+ gpio-leds {
+ led-0 {
+ default-state = "on";
+ };
+
+ led-red {
+ default-state = "on";
+ gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-green {
+ default-state = "on";
+ gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-blue {
+ default-state = "on";
+ gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
&pcie3x1 {
pinctrl-0 = <&pcie30x1_reset_h>;
};
diff --git a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
index 9d18f5d0b36..c493352abc1 100644
--- a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
@@ -6,6 +6,14 @@
#include "rk356x-u-boot.dtsi"
+/ {
+ leds {
+ led-0 {
+ default-state = "on";
+ };
+ };
+};
+
&pcie3x2 {
pinctrl-0 = <&pcie3x2_reset_h>;
};
diff --git a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
index 8e318e624a8..8ebba36f90a 100644
--- a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
+++ b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
@@ -5,6 +5,14 @@
#include "rk3588-u-boot.dtsi"
+/ {
+ leds {
+ led_rgb_b {
+ default-state = "on";
+ };
+ };
+};
+
&fspim2_pins {
bootph-pre-ram;
bootph-some-ram;
diff --git a/arch/arm/dts/rk3588s-rock-5a-u-boot.dtsi b/arch/arm/dts/rk3588s-rock-5a-u-boot.dtsi
index efba0c359ba..a75ae296386 100644
--- a/arch/arm/dts/rk3588s-rock-5a-u-boot.dtsi
+++ b/arch/arm/dts/rk3588s-rock-5a-u-boot.dtsi
@@ -5,6 +5,14 @@
#include "rk3588s-u-boot.dtsi"
+/ {
+ leds {
+ io-led {
+ default-state = "on";
+ };
+ };
+};
+
&sdhci {
cap-mmc-highspeed;
mmc-hs200-1_8v;
--
2.43.0
next prev parent reply other threads:[~2024-08-08 9:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-08 9:27 [PATCH 1/2] configs: rockchip: enable gpio-leds driver for Radxa boards FUKAUMI Naoki
2024-08-08 9:27 ` FUKAUMI Naoki [this message]
2024-08-08 13:13 ` [PATCH 2/2] arm: dts: rockchip: turn LEDs on at boot " Dragan Simic
-- strict thread matches above, loose matches on Subject: below --
2024-08-16 0:12 [PATCH 1/2] configs: rockchip: enable gpio-leds driver " FUKAUMI Naoki
2024-08-16 0:12 ` [PATCH 2/2] arm: dts: rockchip: turn LEDs on at boot " FUKAUMI Naoki
2024-08-24 22:24 ` FUKAUMI Naoki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240808092743.1508-2-naoki@radxa.com \
--to=naoki@radxa.com \
--cc=banglang.huang@foxmail.com \
--cc=chris.obbard@collabora.com \
--cc=eugen.hristev@collabora.com \
--cc=gajjar04akash@gmail.com \
--cc=jagan@amarulasolutions.com \
--cc=jonas@kwiboo.se \
--cc=kever.yang@rock-chips.com \
--cc=philipp.tomsich@vrull.eu \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox