From: Patrick Rudolph <patrick.rudolph@9elements.com>
To: u-boot@lists.denx.de, Matthias Brugger <mbrugger@suse.com>,
Peter Robinson <pbrobinson@gmail.com>
Cc: Patrick Rudolph <patrick.rudolph@9elements.com>,
Simon Glass <sjg@chromium.org>, Tom Rini <trini@konsulko.com>
Subject: [PATCH v4 35/35] configs: Add RPI4 ACPI defconfig
Date: Wed, 18 Sep 2024 17:20:39 +0200 [thread overview]
Message-ID: <20240918152136.3395170-36-patrick.rudolph@9elements.com> (raw)
In-Reply-To: <20240918152136.3395170-1-patrick.rudolph@9elements.com>
Allows to build the RPi4 with ACPI enabled.
TEST: - Boots on qemu-system-aarch64 -machine raspi4b
- Boots on real hardware with arm_64bit=1 in config.txt
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Matthias Brugger <mbrugger@suse.com>
Cc: Peter Robinson <pbrobinson@gmail.com>
---
Changelog v4:
- Enable BLOBLISTS
---
configs/rpi_4_acpi_defconfig | 70 ++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
create mode 100644 configs/rpi_4_acpi_defconfig
diff --git a/configs/rpi_4_acpi_defconfig b/configs/rpi_4_acpi_defconfig
new file mode 100644
index 0000000000..552c5eb8ee
--- /dev/null
+++ b/configs/rpi_4_acpi_defconfig
@@ -0,0 +1,70 @@
+CONFIG_ARM=y
+CONFIG_ARCH_BCM283X=y
+CONFIG_TEXT_BASE=0x00080000
+CONFIG_TARGET_RPI_4=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7fffe30
+CONFIG_ENV_SIZE=0x4000
+CONFIG_DEFAULT_DEVICE_TREE="bcm2711-rpi-4-b"
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_PCI=y
+CONFIG_BOOTSTD_DEFAULTS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_FDT_SIMPLEFB=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="pci enum; usb start;"
+CONFIG_SYS_PBSIZE=1049
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_MISC_INIT_R=y
+CONFIG_BLOBLIST_ALLOC=y
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_FS_UUID=y
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_TFTP_TSIZE=y
+CONFIG_DM_DMA=y
+CONFIG_DFU_MMC=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
+CONFIG_SYS_DFU_MAX_FILE_SIZE=0x200000
+CONFIG_BCM2835_GPIO=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_BCM2835=y
+CONFIG_BCMGENET=y
+CONFIG_PCI_BRCMSTB=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_DM_RNG=y
+CONFIG_RNG_IPROC200=y
+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
+CONFIG_SYSINFO=y
+CONFIG_SYSINFO_SMBIOS=y
+CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP16 is not set
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_VIDEO_BCM2835=y
+CONFIG_CONSOLE_SCROLL_LINES=10
+CONFIG_PHYS_TO_BUS=y
+CONFIG_ACPI=y
+CONFIG_GENERATE_ACPI_TABLE=y
--
2.46.0
next prev parent reply other threads:[~2024-09-18 15:28 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-18 15:20 [PATCH v4 00/35] Implement ACPI on aarch64 Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 01/35] acpi: x86: Move SPCR and DBG2 into common code Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 02/35] acpi: x86: Write FADT in " Patrick Rudolph
2024-09-19 14:11 ` Simon Glass
2024-09-18 15:20 ` [PATCH v4 03/35] acpi: x86: Move MADT to " Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 04/35] acpi: Fix typo Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 05/35] serial: serial_pl01x: Implement .getinfo() for PL01 Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 06/35] acpi: Add define for GTDT Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 07/35] arm: acpi: Add generic ACPI methods Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 08/35] acpi: Add fill_madt to acpi_ops Patrick Rudolph
2024-09-19 14:11 ` Simon Glass
2024-09-18 15:20 ` [PATCH v4 09/35] acpi: acpi_table: Bump revisions Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 10/35] acpi: Add ACPITAB for PPTT and GTDT Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 11/35] acpi: acpi_table: Add IORT support Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 12/35] acpi: Move function prototype Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 13/35] acpi_table: Support platforms with unusable RSDT Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 14/35] efi_loader: Allocate and write ACPI tables Patrick Rudolph
2024-09-18 16:01 ` Ilias Apalodimas
2024-09-19 14:10 ` Simon Glass
2024-09-19 14:39 ` Ilias Apalodimas
2024-09-19 15:00 ` Simon Glass
2024-09-19 15:19 ` Ilias Apalodimas
2024-09-19 15:30 ` Ilias Apalodimas
2024-09-19 15:36 ` Simon Glass
2024-09-20 6:36 ` Ilias Apalodimas
2024-09-20 16:01 ` Simon Glass
2024-09-26 8:01 ` Patrick Rudolph
2024-09-26 11:04 ` Simon Glass
2024-09-26 11:18 ` Ilias Apalodimas
2024-09-27 10:53 ` Simon Glass
2024-09-27 11:30 ` Ilias Apalodimas
2024-09-27 12:35 ` Simon Glass
2024-09-27 13:14 ` Ilias Apalodimas
2024-09-27 13:38 ` Ilias Apalodimas
2024-09-27 14:10 ` Tom Rini
2024-09-27 16:52 ` Simon Glass
2024-09-26 11:25 ` Ilias Apalodimas
2024-09-27 10:51 ` Simon Glass
2024-09-18 15:20 ` [PATCH v4 15/35] acpi: Add processor device Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 16/35] drivers: usb: Add generic XHCI Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 17/35] drivers: ata: Rename ahci_mvebu Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 18/35] drivers/cpu: Add generic armv8 cpu driver Patrick Rudolph
2024-09-19 14:11 ` Simon Glass
2024-09-18 15:20 ` [PATCH v4 19/35] arm: gic-v3-its: Rename objects Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 20/35] arm: gic-v3-its: Implement of_xlate Patrick Rudolph
2024-09-19 14:09 ` Simon Glass
2024-09-18 15:20 ` [PATCH v4 21/35] arm: lib: Add GICV2 driver Patrick Rudolph
2024-09-19 14:09 ` Simon Glass
2024-09-18 15:20 ` [PATCH v4 22/35] drivers: misc: irq-uclass: Update irq_get_by_index Patrick Rudolph
2024-09-19 14:09 ` Simon Glass
2024-09-20 7:56 ` Patrick Rudolph
2024-09-20 15:57 ` Simon Glass
2024-09-18 15:20 ` [PATCH v4 23/35] drivers/arm: Implement acpi_fill_madt Patrick Rudolph
2024-09-19 14:11 ` Simon Glass
2024-09-23 5:48 ` Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 24/35] common: Enable BLOBLIST_TABLES on arm Patrick Rudolph
2024-09-19 14:09 ` Simon Glass
2024-09-18 15:20 ` [PATCH v4 25/35] board: emulation: Add QEMU sbsa support Patrick Rudolph
2024-09-19 14:11 ` Simon Glass
2024-09-18 15:20 ` [PATCH v4 26/35] arm: mach-bcm283x: Map the ARM local MMIO as well Patrick Rudolph
2024-09-19 14:09 ` Simon Glass
2024-09-19 17:36 ` Matthias Brugger
2024-09-18 15:20 ` [PATCH v4 27/35] arm: mach-bcm283x: Bring in some header files from tianocore Patrick Rudolph
2024-09-19 17:37 ` Matthias Brugger
2024-09-18 15:20 ` [PATCH v4 28/35] arm: bcm283x: Generate ACPI tables Patrick Rudolph
2024-09-19 14:11 ` Simon Glass
2024-09-18 15:20 ` [PATCH v4 29/35] board: raspberrypi: Add ASL files from tianocore Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 30/35] arm: cpu: Add ACPI parking protocol support Patrick Rudolph
2024-09-19 14:09 ` Simon Glass
2024-09-23 6:29 ` Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 31/35] armv8: cpu: Enable ACPI parking protocol Patrick Rudolph
2024-09-19 14:09 ` Simon Glass
2024-09-18 15:20 ` [PATCH v4 32/35] arm: mach-bcm283x: Add ARMV8_MULTIENTRY support Patrick Rudolph
2024-09-19 14:09 ` Simon Glass
2024-09-23 5:57 ` Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 33/35] arm: mach-bcm283x: Enable ARMV8_MULTIENTRY Patrick Rudolph
2024-09-18 15:20 ` [PATCH v4 34/35] bloblist: Fix use of uninitialized variable Patrick Rudolph
2024-09-19 14:10 ` Simon Glass
2024-09-18 15:20 ` Patrick Rudolph [this message]
2024-09-19 14:09 ` [PATCH v4 35/35] configs: Add RPI4 ACPI defconfig Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240918152136.3395170-36-patrick.rudolph@9elements.com \
--to=patrick.rudolph@9elements.com \
--cc=mbrugger@suse.com \
--cc=pbrobinson@gmail.com \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox