From: Hal Feng <hal.feng@starfivetech.com>
To: Leo <ycliang@andestech.com>, Tom Rini <trini@konsulko.com>,
Sumit Garg <sumit.garg@linaro.org>,
Rick Chen <rick@andestech.com>,
Heinrich Schuchardt <xypron.glpk@gmx.de>,
H Bell <dmoo_dv@protonmail.com>, E Shattow <lucent@gmail.com>,
Nam Cao <namcao@linutronix.de>, Bo Gan <ganboing@gmail.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Minda Chen <minda.chen@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
u-boot@lists.denx.de
Subject: [PATCH v2 00/14] Support OF_UPSTREAM for StarFive JH7110
Date: Mon, 28 Oct 2024 09:58:33 +0800 [thread overview]
Message-ID: <20241028015847.42344-1-hal.feng@starfivetech.com> (raw)
This patchset add OF_STREAM support for StarFive JH7110 based boards.
All the JH7110 based boards can use the DT from upstreaming linux kernel.
The v1.3b board device tree is set as the default device tree. Support
CONFIG_MULTI_DTB_FIT and the SPL selects the correct U-Boot dtb using the
EEPROM information.
Changes since v1:
- Drop patch 12.
- Modify patch 11 and add three new patches to support
CONFIG_MULTI_DTB_FIT. The SPL selects the correct U-Boot dtb using the
EEPROM information.
Hal Feng (14):
Makefile: Add OF_UPSTREAM Makefile for RISC-V
dts: starfive: Switch to using upstream DT
riscv: dts: jh7110: Drop redundant devicetree files
dt-bindings: Remove StarFive JH7110 clock and reset definitions
riscv: dts: jh7110: Make u-boot device trees adapting to upstream DT
clk: starfive: jh7110: Sync clock definitions with upstream
dt-bindings
pcie: starfive: Make the driver compatible with upstream DT
riscv: dts: jh7110: Move common code to the new
jh7110-common-u-boot.dtsi
riscv: dts: jh7110: Add u-boot device tree for JH7110 based boards
board: starfive: spl: Drop the unneeded DT modification code
configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT
riscv: dts: jh7110: Support multiple DTBs in a Fit image
board: starfive: spl: Fix the wrong use of CONFIG_IS_ENABLED()
board: starfive: spl: Support multiple DTBs for JH7110 based boards
arch/riscv/cpu/jh7110/Kconfig | 1 +
arch/riscv/dts/Makefile | 1 -
arch/riscv/dts/jh7110-common-u-boot.dtsi | 204 +++++
arch/riscv/dts/jh7110-milkv-mars-u-boot.dtsi | 11 +
.../dts/jh7110-pine64-star64-u-boot.dtsi | 6 +
.../jh7110-starfive-visionfive-2-u-boot.dtsi | 117 ---
...10-starfive-visionfive-2-v1.2a-u-boot.dtsi | 6 +
...10-starfive-visionfive-2-v1.3b-u-boot.dtsi | 14 +
.../dts/jh7110-starfive-visionfive-2.dts | 11 -
.../dts/jh7110-starfive-visionfive-2.dtsi | 380 ---------
arch/riscv/dts/jh7110-u-boot.dtsi | 36 +-
arch/riscv/dts/jh7110.dtsi | 761 ------------------
board/starfive/visionfive2/spl.c | 385 +--------
configs/starfive_visionfive2_defconfig | 4 +-
drivers/clk/starfive/clk-jh7110-pll.c | 6 +-
drivers/clk/starfive/clk-jh7110.c | 44 +-
drivers/pci/pcie_starfive_jh7110.c | 59 +-
dts/upstream/src/riscv/Makefile | 14 +
.../dt-bindings/clock/starfive,jh7110-crg.h | 258 ------
.../dt-bindings/reset/starfive,jh7110-crg.h | 183 -----
20 files changed, 373 insertions(+), 2128 deletions(-)
create mode 100644 arch/riscv/dts/jh7110-common-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110-milkv-mars-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110-pine64-star64-u-boot.dtsi
delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2.dts
delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
delete mode 100644 arch/riscv/dts/jh7110.dtsi
create mode 100644 dts/upstream/src/riscv/Makefile
delete mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
delete mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
base-commit: deafcdc8e014dc83f154cc448cf8cf6a24b29136
--
2.43.2
next reply other threads:[~2024-10-28 2:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-28 1:58 Hal Feng [this message]
2024-10-28 1:58 ` [PATCH v2 01/14] Makefile: Add OF_UPSTREAM Makefile for RISC-V Hal Feng
2024-10-28 1:58 ` [PATCH v2 02/14] dts: starfive: Switch to using upstream DT Hal Feng
2024-10-28 1:58 ` [PATCH v2 03/14] riscv: dts: jh7110: Drop redundant devicetree files Hal Feng
2024-10-28 1:58 ` [PATCH v2 04/14] dt-bindings: Remove StarFive JH7110 clock and reset definitions Hal Feng
2024-10-28 1:58 ` [PATCH v2 05/14] riscv: dts: jh7110: Make u-boot device trees adapting to upstream DT Hal Feng
2024-10-28 1:58 ` [PATCH v2 06/14] clk: starfive: jh7110: Sync clock definitions with upstream dt-bindings Hal Feng
2024-10-28 1:58 ` [PATCH v2 07/14] pcie: starfive: Make the driver compatible with upstream DT Hal Feng
2024-10-28 1:58 ` [PATCH v2 08/14] riscv: dts: jh7110: Move common code to the new jh7110-common-u-boot.dtsi Hal Feng
2024-10-28 1:58 ` [PATCH v2 09/14] riscv: dts: jh7110: Add u-boot device tree for JH7110 based boards Hal Feng
2024-10-28 3:34 ` E Shattow
2024-10-28 1:58 ` [PATCH v2 10/14] board: starfive: spl: Drop the unneeded DT modification code Hal Feng
2024-10-28 1:58 ` [PATCH v2 11/14] configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT Hal Feng
2024-10-28 1:58 ` [PATCH v2 12/14] riscv: dts: jh7110: Support multiple DTBs in a Fit image Hal Feng
2024-10-28 1:58 ` [PATCH v2 13/14] board: starfive: spl: Fix the wrong use of CONFIG_IS_ENABLED() Hal Feng
2024-10-28 1:58 ` [PATCH v2 14/14] board: starfive: spl: Support multiple DTBs for JH7110 based boards Hal Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241028015847.42344-1-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=dmoo_dv@protonmail.com \
--cc=emil.renner.berthing@canonical.com \
--cc=ganboing@gmail.com \
--cc=lucent@gmail.com \
--cc=minda.chen@starfivetech.com \
--cc=namcao@linutronix.de \
--cc=rick@andestech.com \
--cc=sumit.garg@linaro.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=xypron.glpk@gmx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox