From: Hal Feng <hal.feng@starfivetech.com>
To: Leo <ycliang@andestech.com>, Tom Rini <trini@konsulko.com>,
Sumit Garg <sumit.garg@linaro.org>,
Rick Chen <rick@andestech.com>,
Heinrich Schuchardt <xypron.glpk@gmx.de>,
H Bell <dmoo_dv@protonmail.com>, E Shattow <lucent@gmail.com>,
Conor Dooley <conor.dooley@microchip.com>,
Nam Cao <namcao@linutronix.de>, Bo Gan <ganboing@gmail.com>,
Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Minda Chen <minda.chen@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
u-boot@lists.denx.de
Subject: [PATCH v3 00/13] Support OF_UPSTREAM for StarFive JH7110
Date: Tue, 5 Nov 2024 11:43:15 +0800 [thread overview]
Message-ID: <20241105034328.56439-1-hal.feng@starfivetech.com> (raw)
This patchset add OF_UPSTREAM support for StarFive JH7110 based boards.
All the JH7110 based boards can use the DT from upstreaming linux kernel.
The v1.3b board device tree is set as the default device tree. Support
CONFIG_MULTI_DTB_FIT and the SPL selects the correct U-Boot dtb using the
EEPROM information.
Changes since v2:
- Drop patch 1, because the riscv of_upstream Makefile is created by Conor
in commit 239e4705099c.
- Drop phy0 rx delay for milkv u-boot dtsi in patch 9.
- Add a Fixes tag for patch 13.
- In patch 14, the PCB version is only obtained when the product_id is
VF7110. Improve the commit messages.
Changes since v1:
- Drop patch 12.
- Modify patch 11 and add three new patches to support
CONFIG_MULTI_DTB_FIT. The SPL selects the correct U-Boot dtb using the
EEPROM information.
History:
v2: https://lore.kernel.org/all/20241028015847.42344-1-hal.feng@starfivetech.com/
v1: https://lore.kernel.org/all/20240930155919.111738-1-hal.feng@starfivetech.com/
Hal Feng (13):
dts: starfive: Switch to using upstream DT
riscv: dts: jh7110: Drop redundant devicetree files
dt-bindings: Remove StarFive JH7110 clock and reset definitions
riscv: dts: jh7110: Make u-boot device trees adapting to upstream DT
clk: starfive: jh7110: Sync clock definitions with upstream
dt-bindings
pcie: starfive: Make the driver compatible with upstream DT
riscv: dts: jh7110: Move common code to the new
jh7110-common-u-boot.dtsi
riscv: dts: jh7110: Add u-boot device tree for JH7110 based boards
board: starfive: spl: Drop the unneeded DT modification code
configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT
riscv: dts: jh7110: Support multiple DTBs in a Fit image
board: starfive: spl: Fix the wrong use of CONFIG_IS_ENABLED()
board: starfive: spl: Support multiple DTBs for JH7110 based boards
arch/riscv/cpu/jh7110/Kconfig | 1 +
arch/riscv/dts/Makefile | 1 -
arch/riscv/dts/jh7110-common-u-boot.dtsi | 204 +++++
arch/riscv/dts/jh7110-milkv-mars-u-boot.dtsi | 10 +
.../dts/jh7110-pine64-star64-u-boot.dtsi | 6 +
.../jh7110-starfive-visionfive-2-u-boot.dtsi | 117 ---
...10-starfive-visionfive-2-v1.2a-u-boot.dtsi | 6 +
...10-starfive-visionfive-2-v1.3b-u-boot.dtsi | 14 +
.../dts/jh7110-starfive-visionfive-2.dts | 11 -
.../dts/jh7110-starfive-visionfive-2.dtsi | 380 ---------
arch/riscv/dts/jh7110-u-boot.dtsi | 36 +-
arch/riscv/dts/jh7110.dtsi | 761 ------------------
board/starfive/visionfive2/spl.c | 383 +--------
configs/starfive_visionfive2_defconfig | 4 +-
drivers/clk/starfive/clk-jh7110-pll.c | 6 +-
drivers/clk/starfive/clk-jh7110.c | 44 +-
drivers/pci/pcie_starfive_jh7110.c | 59 +-
.../dt-bindings/clock/starfive,jh7110-crg.h | 258 ------
.../dt-bindings/reset/starfive,jh7110-crg.h | 183 -----
19 files changed, 358 insertions(+), 2126 deletions(-)
create mode 100644 arch/riscv/dts/jh7110-common-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110-milkv-mars-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110-pine64-star64-u-boot.dtsi
delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi
create mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2.dts
delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
delete mode 100644 arch/riscv/dts/jh7110.dtsi
delete mode 100644 include/dt-bindings/clock/starfive,jh7110-crg.h
delete mode 100644 include/dt-bindings/reset/starfive,jh7110-crg.h
base-commit: 56accc56b9aab87ef4809ccc588e1257969cd271
--
2.43.2
next reply other threads:[~2024-11-05 3:45 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-05 3:43 Hal Feng [this message]
2024-11-05 3:43 ` [PATCH v3 01/13] dts: starfive: Switch to using upstream DT Hal Feng
2024-11-05 3:43 ` [PATCH v3 02/13] riscv: dts: jh7110: Drop redundant devicetree files Hal Feng
2024-11-05 3:43 ` [PATCH v3 03/13] dt-bindings: Remove StarFive JH7110 clock and reset definitions Hal Feng
2024-11-05 3:43 ` [PATCH v3 04/13] riscv: dts: jh7110: Make u-boot device trees adapting to upstream DT Hal Feng
2024-11-05 3:43 ` [PATCH v3 05/13] clk: starfive: jh7110: Sync clock definitions with upstream dt-bindings Hal Feng
2024-11-05 3:43 ` [PATCH v3 06/13] pcie: starfive: Make the driver compatible with upstream DT Hal Feng
2024-11-05 3:43 ` [PATCH v3 07/13] riscv: dts: jh7110: Move common code to the new jh7110-common-u-boot.dtsi Hal Feng
2024-11-05 3:43 ` [PATCH v3 08/13] riscv: dts: jh7110: Add u-boot device tree for JH7110 based boards Hal Feng
2024-11-05 3:43 ` [PATCH v3 09/13] board: starfive: spl: Drop the unneeded DT modification code Hal Feng
2024-11-05 3:43 ` [PATCH v3 10/13] configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT Hal Feng
2024-11-05 3:43 ` [PATCH v3 11/13] riscv: dts: jh7110: Support multiple DTBs in a Fit image Hal Feng
2024-11-05 3:43 ` [PATCH v3 12/13] board: starfive: spl: Fix the wrong use of CONFIG_IS_ENABLED() Hal Feng
2024-11-05 3:43 ` [PATCH v3 13/13] board: starfive: spl: Support multiple DTBs for JH7110 based boards Hal Feng
2024-11-05 6:47 ` Heinrich Schuchardt
2024-11-06 1:53 ` Hal Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241105034328.56439-1-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=conor.dooley@microchip.com \
--cc=dmoo_dv@protonmail.com \
--cc=emil.renner.berthing@canonical.com \
--cc=ganboing@gmail.com \
--cc=lucent@gmail.com \
--cc=minda.chen@starfivetech.com \
--cc=namcao@linutronix.de \
--cc=rick@andestech.com \
--cc=sumit.garg@linaro.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=xypron.glpk@gmx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox