[PATCH v2 3/3] board: phytec: imx93: Add phyCORE-i.MX 93 support for all SOM variants

[Christoph Stoidner <c.stoidner@phytec.de>]

The phyCORE-i.MX 93 is available in various variants (e.g. different ram
sizes, eMMC HS400 yes/no). Enable hardware introspection for the
imx93-phyboard-segin_defconfig, so that during startup the SOM module
variant can be detected, and the hardware can be configured accordingly.
The resulting SPL and u-boot binary shall able to boot each
phyCORE-i.MX 93 module variant on each carrier board. Finally rename
imx93-phyboard-segin_defconfig to imx93-phycore_defconfig, to highlight
its SOM scope.

Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
---
Cc: Mathieu Othacehe <m.othacehe@gmail.com>
Cc: Christoph Stoidner <c.stoidner@phytec.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Yannic Moog <y.moog@phytec.de>
Cc: Primoz Fiser <primoz.fiser@norik.com>
Cc: Andrej Picej <andrej.picej@norik.com>
Cc: Wadim Egorov <w.egorov@phytec.de>
---
Changes in v2:
- just rename imx93-phyboard-segin_defconfig and add needed CONFIGs,
  instead of creating an entirely new second defconfig
- remove wrong comment from imx93-phyboard-segin-u-boot.dtsi
- improve commit message

 arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi               | 6 ++++--
 board/phytec/phycore_imx93/MAINTAINERS                      | 2 +-
 ...x93-phyboard-segin_defconfig => imx93-phycore_defconfig} | 4 +++-
 3 files changed, 8 insertions(+), 4 deletions(-)
 rename configs/{imx93-phyboard-segin_defconfig => imx93-phycore_defconfig} (98%)

diff --git a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
index 25c778bb07..2245461032 100644
--- a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
+++ b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
@@ -2,15 +2,17 @@
 /*
  * Copyright (C) 2023 PHYTEC Messtechnik GmbH
  * Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
  *
  * Product homepage:
- * phyBOARD-Segin carrier board is reused for the i.MX93 design.
- * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/
+   https://www.phytec.de/produkte/system-on-modules/phycore-imx-91-93/
  */
 
 #include "imx93-u-boot.dtsi"
 
 / {
+	model = "PHYTEC phyCORE-i.MX93";
+
 	wdt-reboot {
 		compatible = "wdt-reboot";
 		wdt = <&wdog3>;
diff --git a/board/phytec/phycore_imx93/MAINTAINERS b/board/phytec/phycore_imx93/MAINTAINERS
index cea817ffdc..718f89a084 100644
--- a/board/phytec/phycore_imx93/MAINTAINERS
+++ b/board/phytec/phycore_imx93/MAINTAINERS
@@ -9,5 +9,5 @@ F:      arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
 F:      board/phytec/phycore_imx93/
 F:      board/phytec/common/imx93_som_detection.c
 F:      board/phytec/common/imx93_som_detection.h
-F:      configs/imx93-phyboard-segin_defconfig
+F:      configs/imx93-phycore_defconfig
 F:      include/configs/phycore_imx93.h
diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx93-phycore_defconfig
similarity index 98%
rename from configs/imx93-phyboard-segin_defconfig
rename to configs/imx93-phycore_defconfig
index 18a4087e4b..cf9800118a 100644
--- a/configs/imx93-phyboard-segin_defconfig
+++ b/configs/imx93-phycore_defconfig
@@ -6,13 +6,13 @@ CONFIG_SYS_MALLOC_F_LEN=0x20000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_PHYTEC_SOM_DETECTION=y
 CONFIG_ENV_SOURCE_FILE="phycore_imx93"
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x700000
 CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx93-phyboard-segin"
-CONFIG_SPL_TEXT_BASE=0x2049A000
 CONFIG_AHAB_BOOT=y
 CONFIG_TARGET_PHYCORE_IMX93=y
 CONFIG_OF_LIBFDT_OVERLAY=y
@@ -20,6 +20,7 @@ CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK=0x20519dd0
+CONFIG_SPL_TEXT_BASE=0x2049A000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x2051a000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
@@ -31,6 +32,7 @@ CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x90000000
 CONFIG_REMAKE_ELF=y
+# CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
-- 
2.34.1