From: Hal Feng <hal.feng@starfivetech.com>
To: Leo <ycliang@andestech.com>, Tom Rini <trini@konsulko.com>,
Sumit Garg <sumit.garg@linaro.org>,
Rick Chen <rick@andestech.com>,
Heinrich Schuchardt <xypron.glpk@gmx.de>,
H Bell <dmoo_dv@protonmail.com>, E Shattow <lucent@gmail.com>,
Conor Dooley <conor.dooley@microchip.com>,
Nam Cao <namcao@linutronix.de>, Bo Gan <ganboing@gmail.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Minda Chen <minda.chen@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
u-boot@lists.denx.de
Subject: [PATCH v5 02/11] riscv: dts: jh7110: Make u-boot device trees adapting to upstream DT
Date: Tue, 19 Nov 2024 10:04:16 +0800 [thread overview]
Message-ID: <20241119020425.51989-3-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20241119020425.51989-1-hal.feng@starfivetech.com>
Add u-boot features to the U-Boot device tree.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
...10-starfive-visionfive-2-v1.3b-u-boot.dtsi | 43 +++++++++++++++++--
arch/riscv/dts/jh7110-u-boot.dtsi | 34 +++++++++++++++
2 files changed, 73 insertions(+), 4 deletions(-)
diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
index 3012466b30..fac9e16fb1 100644
--- a/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
+++ b/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
@@ -6,6 +6,10 @@
#include "binman.dtsi"
#include "jh7110-u-boot.dtsi"
/ {
+ aliases {
+ spi0 = &qspi;
+ };
+
chosen {
bootph-pre-ram;
};
@@ -27,42 +31,70 @@
&uart0 {
bootph-pre-ram;
+ reg-offset = <0>;
+ current-speed = <115200>;
+ clock-frequency = <24000000>;
};
&mmc0 {
bootph-pre-ram;
+ compatible = "snps,dw-mshc";
};
&mmc1 {
bootph-pre-ram;
+ compatible = "snps,dw-mshc";
+};
+
+&phy0 {
+ rx-internal-delay-ps = <1900>;
+};
+
+&phy1 {
+ rx-internal-delay-ps = <0>;
};
&qspi {
bootph-pre-ram;
+ spi-max-frequency = <250000000>;
- nor-flash@0 {
+ flash@0 {
bootph-pre-ram;
+ /delete-property/ cdns,read-delay;
+ spi-max-frequency = <100000000>;
};
};
+&syscrg {
+ assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
+ <&syscrg JH7110_SYSCLK_BUS_ROOT>,
+ <&syscrg JH7110_SYSCLK_PERH_ROOT>,
+ <&syscrg JH7110_SYSCLK_QSPI_REF>;
+ assigned-clock-parents = <&pllclk JH7110_PLLCLK_PLL0_OUT>,
+ <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+ <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+ <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>;
+ assigned-clock-rates = <0>, <0>, <0>, <0>;
+};
+
&sysgpio {
bootph-pre-ram;
};
&mmc0_pins {
bootph-pre-ram;
- mmc0-pins-rest {
+ rst-pins {
bootph-pre-ram;
};
};
&mmc1_pins {
bootph-pre-ram;
- mmc1-pins0 {
+ clk-pins {
bootph-pre-ram;
};
- mmc1-pins1 {
+ mmc-pins {
bootph-pre-ram;
};
};
@@ -78,6 +110,9 @@
bootph-pre-ram;
eeprom@50 {
bootph-pre-ram;
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ pagesize = <16>;
};
};
diff --git a/arch/riscv/dts/jh7110-u-boot.dtsi b/arch/riscv/dts/jh7110-u-boot.dtsi
index 52c1d60859..21a2ab1789 100644
--- a/arch/riscv/dts/jh7110-u-boot.dtsi
+++ b/arch/riscv/dts/jh7110-u-boot.dtsi
@@ -46,6 +46,15 @@
};
};
+ timer {
+ compatible = "riscv,timer";
+ interrupts-extended = <&cpu0_intc 5>,
+ <&cpu1_intc 5>,
+ <&cpu2_intc 5>,
+ <&cpu3_intc 5>,
+ <&cpu4_intc 5>;
+ };
+
soc {
bootph-pre-ram;
@@ -73,10 +82,35 @@
bootph-pre-ram;
};
+&gmac0_rgmii_rxin {
+ bootph-pre-ram;
+};
+
&gmac0_rmii_refin {
bootph-pre-ram;
};
+&gmac1_rgmii_rxin {
+ bootph-pre-ram;
+};
+
+&gmac1_rmii_refin {
+ bootph-pre-ram;
+};
+
+&stmmac_axi_setup {
+ snps,wr_osr_lmt = <4>;
+ snps,rd_osr_lmt = <4>;
+};
+
+&gmac0 {
+ snps,perfect-filter-entries = <8>;
+};
+
+&gmac1 {
+ snps,perfect-filter-entries = <8>;
+};
+
&aoncrg {
bootph-pre-ram;
};
--
2.43.2
next prev parent reply other threads:[~2024-11-19 2:08 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-19 2:04 [PATCH v5 00/11] Support OF_UPSTREAM for StarFive JH7110 Hal Feng
2024-11-19 2:04 ` [PATCH v5 01/11] dts: starfive: Switch to using upstream DT Hal Feng
2024-11-19 4:03 ` Sumit Garg
2024-11-19 2:04 ` Hal Feng [this message]
2024-11-19 4:06 ` [PATCH v5 02/11] riscv: dts: jh7110: Make u-boot device trees adapting to " Sumit Garg
2024-11-20 1:47 ` Hal Feng
2024-11-22 6:42 ` E Shattow
2024-11-22 7:44 ` Sumit Garg
2024-11-23 12:12 ` E Shattow
2024-11-25 5:47 ` Sumit Garg
2024-11-24 23:31 ` Hal Feng
2024-11-19 2:04 ` [PATCH v5 03/11] pcie: starfive: Make the driver compatible with " Hal Feng
2024-11-19 2:04 ` [PATCH v5 04/11] riscv: dts: jh7110: Move common code to the new jh7110-common-u-boot.dtsi Hal Feng
2024-11-19 2:04 ` [PATCH v5 05/11] riscv: dts: jh7110: Add u-boot device tree for JH7110 based boards Hal Feng
2024-11-22 0:28 ` E Shattow
2024-11-22 1:55 ` Hal Feng
2024-11-19 2:04 ` [PATCH v5 06/11] board: starfive: spl: Drop the unneeded DT modification code Hal Feng
2024-11-19 2:04 ` [PATCH v5 07/11] configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT Hal Feng
2024-11-19 2:04 ` [PATCH v5 08/11] riscv: dts: jh7110: Support multiple DTBs in a Fit image Hal Feng
2024-11-22 9:20 ` E Shattow
2024-11-24 23:38 ` Hal Feng
2024-11-19 2:04 ` [PATCH v5 09/11] board: starfive: spl: Fix the wrong use of CONFIG_IS_ENABLED() Hal Feng
2024-11-19 2:04 ` [PATCH v5 10/11] board: starfive: spl: Support multiple DTBs for JH7110 based boards Hal Feng
2024-11-19 2:04 ` [PATCH v5 11/11] riscv: cpu: jh7110: Sort the list of imply statements Hal Feng
2024-11-22 7:55 ` [PATCH v5 00/11] Support OF_UPSTREAM for StarFive JH7110 E Shattow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241119020425.51989-3-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=conor.dooley@microchip.com \
--cc=dmoo_dv@protonmail.com \
--cc=emil.renner.berthing@canonical.com \
--cc=ganboing@gmail.com \
--cc=lucent@gmail.com \
--cc=minda.chen@starfivetech.com \
--cc=namcao@linutronix.de \
--cc=rick@andestech.com \
--cc=sumit.garg@linaro.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=xypron.glpk@gmx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox