public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Lothar Rubusch <l.rubusch@gmail.com>
To: u-boot@lists.denx.de, trini@konsulko.com, marex@denx.de,
	simon.k.r.goldschmidt@gmail.com, tien.fong.chee@intel.com,
	sumit.garg@linaro.org
Cc: sjg@chromium.org, xypron.glpk@gmx.de, michal.simek@amd.com,
	jit.loon.lim@intel.com, barnas@google.com, l.rubusch@gmail.com
Subject: [PATCH v4 v5 00/10] add support for Enclustra Mercury AA1 SoMs
Date: Tue, 19 Nov 2024 22:46:33 +0000	[thread overview]
Message-ID: <20241119224643.27692-1-l.rubusch@gmail.com> (raw)

Introduce the support for three variants of Enclustra's Intel Mercury AA1 (with
Intel Arria10) SoMs and additional configs.

The DT approach is partly based on dts/upstream, which are (going to be)
upstreamed to the linux kernel.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
v4 -> v5:
- exclude typo / wording fixes for binman.rst, gdb.rst and binman/entries.rst
- implicitely builds using binman
v3 -> v4:
- fix wrong mail address in v2 and author
- update scripts for stdboot and generic load
- clean up patch organization (patch 7/10 was malformed and almost empty,
  added and removed stances,..)
- fix binding used for "enclustra,altera_set_storage"
- separate u-boot specific part of .dts to a
  socfpga_arria10_mercury_aa1-u-boot.dtsi file
- integrate fpga.itb build with binman in the -u-boot.dtsi file
  note:
  1. due to binman, now the build will need binman build (i.e. requirements)
     and is build then with "make NO_PYTHON=1"
  2. the fpga bitstream files bitstream.core.rbf and bitstream.periph.rbf
     are generated by a particular Quartus design, so they can't be committed
     here. This makes the build fail, if build with binman.
     For testing, thus build with
     "make CONFIG_BINMAN=n"
- fix some typos in binman and gdb documentation (additional patch)

v2 -> v3:
- update of DT concept to work with dts/upstream
- update of DT parts in arch/arm/dts, because of:
  -- the handoff initialization of the Arria10 SoC
  -- the fpga loader for the bitstream in the DTS
  -- the adjustments to access the boot media, from where to load the fpga.itb
  -- and to mux media for booting, e.g. QSPI off, when booting from MMC
- implementation of kconfig options to combine SoM .dtsi file, carrier board
  .dtsi files, boot-mode parts, and so on resulting in a single .dts
  file located in arch/arm/dts because of the above mentioned reasons
- adjustents to (better) satisfy dtb checks
- updated MAINTAINERS
- updated documentation
- update to use standard boot and environment as only environment, removal of
  explicit variables and environment files
- removal of duplicate codes
- cleanup and implement altera_set_storage (boot media switch command in
  u-boot shell) based on DM
- fix spansion flash access to allow flashing from off the u-boot shell,
  this patch was already presented separately, the fix is actively needed for
  the AA1 SoM
- sort lists in several files alfabetically
- update boot commands using && instead of ;

v1 -> v2:
- removal si5338 driver
- removal si5338 driver usage
- rename .c file for the boot cmd, build conditionally
- add separate .c file for late boot init to read MAC address from eeprom
- keep DT approach for u-boot under discussion
- fix issues in doc
- update MAINTAINERS to cover doc

---
Lothar Rubusch (10):
  doc: board: enclustra: add Enclustra Mercury+ AA1
  ARM: socfpga: add Mercury+ AA1 SoM support
  ARM: dts: socfpga: add Mercury+ AA1 for u-boot dts
  ARM: socfpga: add Enclustra storage switch
  ARM: socfpga: add Mercury+ AA1 boot scripts
  ARM: socfpga: AA1: support MAC from secure eeprom
  misc: atsha204a: update kconfig description
  ARM: dts: arria10: update according to DTSpec
  ARM: socfpga: update function call to modern API
  ARM: socfpga: apply binman approach to fpga parts

 arch/arm/dts/socfpga_arria10.dtsi             |  42 ++-
 ..._arria10_enclustra_mercury_aa1-u-boot.dtsi |  89 +++++
 .../socfpga_arria10_enclustra_mercury_aa1.dts |  62 ++++
 .../socfpga_arria10_mercury_aa1-u-boot.dtsi   |  19 ++
 .../dts/socfpga_arria10_mercury_aa1_handoff.h | 305 ++++++++++++++++++
 arch/arm/mach-socfpga/Kconfig                 |  10 +
 arch/arm/mach-socfpga/misc_arria10.c          |   2 -
 board/enclustra/bootscripts/qspi-aa1.cmd      |  12 +
 board/enclustra/bootscripts/sd-aa1.cmd        |   9 +
 board/enclustra/common/Kconfig                |  25 ++
 board/enclustra/common/Makefile               |   7 +
 board/enclustra/common/enclustra_mac.h        |  48 +++
 board/enclustra/common/mac_atsha204.c         | 102 ++++++
 board/enclustra/common/mac_common.c           |  52 +++
 board/enclustra/common/mac_ds28.c             |  93 ++++++
 board/enclustra/mercury_aa1/Kconfig           |  52 +++
 board/enclustra/mercury_aa1/MAINTAINERS       |  12 +
 board/enclustra/mercury_aa1/Makefile          |  10 +
 .../mercury_aa1/aa1_board_late_init.c         |  17 +
 .../mercury_aa1/aa1_set_storage_cmd.c         | 190 +++++++++++
 .../socfpga_enclustra_mercury_aa1_defconfig   |  86 +++++
 doc/board/enclustra/index.rst                 |   9 +
 doc/board/enclustra/mercury-aa1.rst           | 230 +++++++++++++
 doc/board/index.rst                           |   1 +
 drivers/misc/Kconfig                          |   2 +-
 include/configs/socfpga_mercury_aa1.h         |  23 ++
 26 files changed, 1497 insertions(+), 12 deletions(-)
 create mode 100644 arch/arm/dts/socfpga_arria10_enclustra_mercury_aa1-u-boot.dtsi
 create mode 100644 arch/arm/dts/socfpga_arria10_enclustra_mercury_aa1.dts
 create mode 100644 arch/arm/dts/socfpga_arria10_mercury_aa1_handoff.h
 create mode 100644 board/enclustra/bootscripts/qspi-aa1.cmd
 create mode 100644 board/enclustra/bootscripts/sd-aa1.cmd
 create mode 100644 board/enclustra/common/Kconfig
 create mode 100644 board/enclustra/common/Makefile
 create mode 100644 board/enclustra/common/enclustra_mac.h
 create mode 100644 board/enclustra/common/mac_atsha204.c
 create mode 100644 board/enclustra/common/mac_common.c
 create mode 100644 board/enclustra/common/mac_ds28.c
 create mode 100644 board/enclustra/mercury_aa1/Kconfig
 create mode 100644 board/enclustra/mercury_aa1/MAINTAINERS
 create mode 100644 board/enclustra/mercury_aa1/Makefile
 create mode 100644 board/enclustra/mercury_aa1/aa1_board_late_init.c
 create mode 100644 board/enclustra/mercury_aa1/aa1_set_storage_cmd.c
 create mode 100644 configs/socfpga_enclustra_mercury_aa1_defconfig
 create mode 100644 doc/board/enclustra/index.rst
 create mode 100644 doc/board/enclustra/mercury-aa1.rst
 create mode 100644 include/configs/socfpga_mercury_aa1.h

-- 
2.39.2


             reply	other threads:[~2024-11-20  0:28 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-19 22:46 Lothar Rubusch [this message]
2024-11-19 22:46 ` [PATCH v4 v5 01/10] doc: board: enclustra: add Enclustra Mercury+ AA1 Lothar Rubusch
2024-11-19 22:46 ` [PATCH v4 v5 02/10] ARM: socfpga: add Mercury+ AA1 SoM support Lothar Rubusch
2024-11-19 22:46 ` [PATCH v4 v5 03/10] ARM: dts: socfpga: add Mercury+ AA1 for u-boot dts Lothar Rubusch
2025-01-22  4:35   ` Chee, Tien Fong
2025-01-27 10:30     ` Lothar Rubusch
2024-11-19 22:46 ` [PATCH v4 v5 04/10] ARM: socfpga: add Enclustra storage switch Lothar Rubusch
2024-11-19 22:46 ` [PATCH v4 v5 05/10] ARM: socfpga: add Mercury+ AA1 boot scripts Lothar Rubusch
2024-11-19 22:46 ` [PATCH v4 v5 06/10] ARM: socfpga: AA1: support MAC from secure eeprom Lothar Rubusch
2024-11-19 22:46 ` [PATCH v4 v5 07/10] misc: atsha204a: update kconfig description Lothar Rubusch
2024-11-19 22:46 ` [PATCH v4 v5 08/10] ARM: dts: arria10: update according to DTSpec Lothar Rubusch
2024-11-19 22:46 ` [PATCH v4 v5 09/10] ARM: socfpga: update function call to modern API Lothar Rubusch
2024-11-19 22:46 ` [PATCH v4 v5 10/10] ARM: socfpga: apply binman approach to fpga parts Lothar Rubusch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241119224643.27692-1-l.rubusch@gmail.com \
    --to=l.rubusch@gmail.com \
    --cc=barnas@google.com \
    --cc=jit.loon.lim@intel.com \
    --cc=marex@denx.de \
    --cc=michal.simek@amd.com \
    --cc=simon.k.r.goldschmidt@gmail.com \
    --cc=sjg@chromium.org \
    --cc=sumit.garg@linaro.org \
    --cc=tien.fong.chee@intel.com \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    --cc=xypron.glpk@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox