From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Cc: Peter Robinson <pbrobinson@gmail.com>
Subject: [PATCHv2 4/6] blk: Make block subsystems select BLK
Date: Tue, 14 Jan 2025 19:22:11 -0600 [thread overview]
Message-ID: <20250115012322.215243-5-trini@konsulko.com> (raw)
In-Reply-To: <20250115012322.215243-1-trini@konsulko.com>
The BLK symbol has a few meanings, one of which is that it controls the
driver model portion of a "block device". Rather than having this hidden
symbol be "default y if ..." it should be select'd by the various block
subsystems.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
---
Changes in v2:
- None.
---
drivers/ata/Kconfig | 2 ++
drivers/block/Kconfig | 7 +++----
drivers/mmc/Kconfig | 1 +
drivers/nvme/Kconfig | 1 +
drivers/scsi/Kconfig | 1 +
drivers/usb/Kconfig | 1 +
drivers/virtio/Kconfig | 1 +
7 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 4fbb63a148ac..29ceab849c02 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -1,6 +1,7 @@
config AHCI
bool "Support SATA controllers with driver model"
depends on DM
+ select BLK
help
This enables a uclass for disk controllers in U-Boot. Various driver
types can use this, such as AHCI/SATA. It does not provide any standard
@@ -9,6 +10,7 @@ config AHCI
config SATA
bool "Support SATA controllers"
+ select BLK
help
This enables support for SATA (Serial Advanced Technology
Attachment), a serial bus standard for connecting to hard drives and
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 5283d8981e09..cc75bad02b8c 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -1,8 +1,5 @@
config BLK
- bool # "Support block devices"
- depends on DM
- def_bool y if MMC || USB || SCSI || NVME || IDE || AHCI || SATA
- def_bool y if EFI_MEDIA || VIRTIO_BLK || PVBLOCK
+ bool
help
Enable support for block devices, such as SCSI, MMC and USB
flash sticks. These provide a block-level interface which permits
@@ -100,6 +97,7 @@ config TPL_BLOCK_CACHE
config EFI_MEDIA
bool "Support EFI media drivers"
default y if EFI || SANDBOX
+ select BLK
help
Enable this to support media devices on top of UEFI. This enables
just the uclass so you also need a specific driver to make this do
@@ -139,6 +137,7 @@ endif # EFI_MEDIA
config IDE
bool "Support IDE controllers"
+ select BLK
help
Enables support for IDE (Integrated Drive Electronics) hard drives.
This allows access to raw blocks and filesystems on an IDE drive
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 46513db0d6e3..4827834b4aab 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -3,6 +3,7 @@ menu "MMC Host controller Support"
config MMC
bool "MMC/SD/SDIO card support"
default ARM || PPC || SANDBOX
+ select BLK
select DM_MMC
help
This selects MultiMediaCard, Secure Digital and Secure
diff --git a/drivers/nvme/Kconfig b/drivers/nvme/Kconfig
index 73edb3551606..d138867666bd 100644
--- a/drivers/nvme/Kconfig
+++ b/drivers/nvme/Kconfig
@@ -4,6 +4,7 @@
config NVME
bool "NVM Express device support"
+ select BLK
help
This option enables support for NVM Express devices.
It supports basic functions of NVMe (read/write).
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 7e21c4ae2bb8..fc87d34cca39 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1,5 +1,6 @@
config SCSI
bool "Support SCSI controllers with driver model"
+ select BLK
help
This enables support for SCSI (Small Computer System Interface),
a parallel interface widely used with storage peripherals such as
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 960b6a906ac4..99c6649e4178 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -1,5 +1,6 @@
menuconfig USB
bool "USB support"
+ select BLK
---help---
Universal Serial Bus (USB) is a specification for a serial bus
subsystem which offers higher speeds and more features than the
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 1de68867d52e..512ac376f185 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -64,6 +64,7 @@ config VIRTIO_NET
config VIRTIO_BLK
bool "virtio block driver"
depends on VIRTIO
+ select BLK
help
This is the virtual block driver for virtio. It can be used with
QEMU based targets.
--
2.43.0
next prev parent reply other threads:[~2025-01-15 1:24 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-20 22:22 [PATCH 0/6] Rework the BLK symbol usage in Kconfig Tom Rini
2024-12-20 22:22 ` [PATCH 1/6] drivers/mmc/Kconfig: Remove extraneous BLK dependencies Tom Rini
2024-12-22 23:49 ` Jaehoon Chung
2025-01-14 13:25 ` Quentin Schulz
2025-01-14 16:58 ` Tom Rini
2024-12-20 22:22 ` [PATCH 2/6] drivers/mmc/Kconfig: Make DM_MMC a hidden symbol Tom Rini
2024-12-23 18:26 ` Peter Robinson
2025-01-14 13:43 ` Quentin Schulz
2025-01-14 16:58 ` Tom Rini
2024-12-20 22:22 ` [PATCH 3/6] efi_loader: Depend on BLK Tom Rini
2024-12-20 22:50 ` Heinrich Schuchardt
2024-12-20 22:22 ` [PATCH 4/6] blk: Make block subsystems select BLK Tom Rini
2024-12-23 18:31 ` Peter Robinson
2024-12-23 18:53 ` Tom Rini
2025-01-14 13:45 ` Quentin Schulz
2025-01-14 16:58 ` Tom Rini
2025-01-15 17:38 ` Quentin Schulz
2024-12-20 22:22 ` [PATCH 5/6] mtd: Correct dependency of BLK Tom Rini
2024-12-23 18:27 ` Peter Robinson
2025-01-14 13:46 ` Quentin Schulz
2024-12-20 22:22 ` [PATCH 6/6] block: Remove "select BLK" from non-block drivers Tom Rini
2024-12-23 18:26 ` Peter Robinson
2025-01-14 13:53 ` Quentin Schulz
2025-01-14 16:59 ` Tom Rini
2025-01-15 17:49 ` Quentin Schulz
2025-01-15 20:20 ` Tom Rini
2025-01-16 9:21 ` Quentin Schulz
2025-01-16 14:33 ` Tom Rini
2025-01-15 1:22 ` [PATCHv2 0/6] Rework the BLK symbol usage in Kconfig Tom Rini
2025-01-15 1:22 ` [PATCHv2 1/6] drivers/mmc/Kconfig: Remove extraneous BLK dependencies Tom Rini
2025-01-15 1:22 ` [PATCHv2 2/6] drivers/mmc/Kconfig: Make DM_MMC a hidden symbol Tom Rini
2025-01-15 1:22 ` [PATCHv2 3/6] efi_loader: Depend on BLK Tom Rini
2025-01-15 1:22 ` Tom Rini [this message]
2025-01-15 17:51 ` [PATCHv2 4/6] blk: Make block subsystems select BLK Quentin Schulz
2025-01-15 18:28 ` Tom Rini
2025-01-15 1:22 ` [PATCHv2 5/6] mtd: Correct dependency of BLK Tom Rini
2025-01-15 1:22 ` [PATCHv2 6/6] block: Remove "select BLK" from non-block drivers Tom Rini
2025-01-21 4:49 ` [PATCHv2 0/6] Rework the BLK symbol usage in Kconfig Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250115012322.215243-5-trini@konsulko.com \
--to=trini@konsulko.com \
--cc=pbrobinson@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox