* [PATCH] phycore-imx8mp: Enable CAAM in spl
@ 2025-01-17 13:20 Leonard Anderweit
2025-01-20 13:47 ` Fabio Estevam
0 siblings, 1 reply; 2+ messages in thread
From: Leonard Anderweit @ 2025-01-17 13:20 UTC (permalink / raw)
To: u-boot
Cc: Teresa Remmet, Tom Rini, Benjamin Hahn, Leonard Anderweit,
Yannic Moog, Wadim Egorov, Fabio Estevam, Mattijs Korpershoek
Enable CAAM in spl.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
---
board/phytec/phycore_imx8mp/spl.c | 2 ++
configs/phycore-imx8mp_defconfig | 2 --
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/phytec/phycore_imx8mp/spl.c b/board/phytec/phycore_imx8mp/spl.c
index 0610d8bbd0b8..cb8e450b9956 100644
--- a/board/phytec/phycore_imx8mp/spl.c
+++ b/board/phytec/phycore_imx8mp/spl.c
@@ -165,6 +165,8 @@ int power_init_board(void)
void spl_board_init(void)
{
+ arch_misc_init();
+
/* Set GIC clock to 500Mhz for OD VDD_SOC. */
clock_enable(CCGR_GIC, 0);
clock_set_target_val(GIC_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(5));
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index ba716a6875b8..c0501907b2c4 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -52,7 +52,6 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
-# CONFIG_SPL_CRYPTO is not set
CONFIG_SPL_I2C=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_SPL_POWER=y
@@ -180,4 +179,3 @@ CONFIG_USB_GADGET_MANUFACTURER="PHYTEC"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_IMX_WATCHDOG=y
-# CONFIG_SPL_SHA_HW_ACCEL is not set
--
2.34.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] phycore-imx8mp: Enable CAAM in spl
2025-01-17 13:20 [PATCH] phycore-imx8mp: Enable CAAM in spl Leonard Anderweit
@ 2025-01-20 13:47 ` Fabio Estevam
0 siblings, 0 replies; 2+ messages in thread
From: Fabio Estevam @ 2025-01-20 13:47 UTC (permalink / raw)
To: Leonard Anderweit
Cc: u-boot, Teresa Remmet, Tom Rini, Benjamin Hahn, Yannic Moog,
Wadim Egorov, Mattijs Korpershoek
On Fri, Jan 17, 2025 at 10:20 AM Leonard Anderweit
<l.anderweit@phytec.de> wrote:
>
> Enable CAAM in spl.
>
> Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Applied, thanks.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-01-20 13:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-01-17 13:20 [PATCH] phycore-imx8mp: Enable CAAM in spl Leonard Anderweit
2025-01-20 13:47 ` Fabio Estevam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox