[PATCH v6 2/8] phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver

[Minda Chen <minda.chen@starfivetech.com>]

Add Starfive JH7110 USB 2.0 PHY driver, which is generic
PHY driver.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
---
 drivers/phy/Kconfig                          |   1 +
 drivers/phy/Makefile                         |   1 +
 drivers/phy/starfive/Kconfig                 |  14 ++
 drivers/phy/starfive/Makefile                |   6 +
 drivers/phy/starfive/phy-jh7110-usb-syscon.h |   9 ++
 drivers/phy/starfive/phy-jh7110-usb2.c       | 162 +++++++++++++++++++
 6 files changed, 193 insertions(+)
 create mode 100644 drivers/phy/starfive/Kconfig
 create mode 100644 drivers/phy/starfive/Makefile
 create mode 100644 drivers/phy/starfive/phy-jh7110-usb-syscon.h
 create mode 100644 drivers/phy/starfive/phy-jh7110-usb2.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index e12347e8a03..f940648fe58 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -309,5 +309,6 @@ source "drivers/phy/cadence/Kconfig"
 source "drivers/phy/ti/Kconfig"
 source "drivers/phy/qcom/Kconfig"
 source "drivers/phy/renesas/Kconfig"
+source "drivers/phy/starfive/Kconfig"
 
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index c35f9294dd9..ce4ea28b299 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -44,3 +44,4 @@ obj-y += cadence/
 obj-y += ti/
 obj-y += qcom/
 obj-y += renesas/
+obj-y += starfive/
diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
new file mode 100644
index 00000000000..a7cf0a55dff
--- /dev/null
+++ b/drivers/phy/starfive/Kconfig
@@ -0,0 +1,14 @@
+#
+# PHY drivers for Starfive platforms
+#
+
+menu "Starfive PHY driver"
+
+config PHY_STARFIVE_JH7110_USB2
+	bool "Starfive JH7110 USB 2.0 PHY driver"
+	depends on PHY
+	help
+	  Enable this to support the Starfive JH7110 USB 2.0 PHY.
+	  Generic PHY driver JH7110 USB 2.0.
+
+endmenu
diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
new file mode 100644
index 00000000000..a405a75e34c
--- /dev/null
+++ b/drivers/phy/starfive/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2023 Starfive
+#
+
+obj-$(CONFIG_PHY_STARFIVE_JH7110_USB2)	+= phy-jh7110-usb2.o
diff --git a/drivers/phy/starfive/phy-jh7110-usb-syscon.h b/drivers/phy/starfive/phy-jh7110-usb-syscon.h
new file mode 100644
index 00000000000..0eb66f0d859
--- /dev/null
+++ b/drivers/phy/starfive/phy-jh7110-usb-syscon.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef PHY_JH7110_USB_SYSCON_H_
+#define PHY_JH7110_USB_SYSCON_H_
+
+#define SYSCON_USB_PDRSTN_REG_OFFSET	0x18
+#define USB_PDRSTN_SPLIT_BIT		 17
+
+#endif
diff --git a/drivers/phy/starfive/phy-jh7110-usb2.c b/drivers/phy/starfive/phy-jh7110-usb2.c
new file mode 100644
index 00000000000..1a28381e0df
--- /dev/null
+++ b/drivers/phy/starfive/phy-jh7110-usb2.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * StarFive JH7110 USB 2.0 PHY driver
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ * Author: Minda Chen <minda.chen@starfivetech.com>
+ */
+
+#include <asm/io.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <errno.h>
+#include <generic-phy.h>
+#include <regmap.h>
+#include <soc.h>
+#include <syscon.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+
+#include "phy-jh7110-usb-syscon.h"
+
+#define USB_LS_KEEPALIVE_OFF		0x4
+#define USB_LS_KEEPALIVE_ENABLE		BIT(4)
+#define USB_PHY_CLK_RATE		125000000
+
+struct jh7110_usb2_phy {
+	struct phy *phy;
+	struct regmap *sys_syscon;
+	void __iomem *regs;
+	struct clk *usb_125m_clk;
+	struct clk *app_125m;
+	struct regmap_field *usb_split;
+	enum phy_mode mode;
+};
+
+static void usb2_set_ls_keepalive(struct jh7110_usb2_phy *phy, bool set)
+{
+	/* Host mode enable the LS speed keep-alive signal */
+	clrsetbits_le32(phy->regs + USB_LS_KEEPALIVE_OFF,
+			USB_LS_KEEPALIVE_ENABLE,
+			set ? USB_LS_KEEPALIVE_ENABLE : 0);
+}
+
+static int usb2_phy_set_mode(struct phy *phy,
+			     enum phy_mode mode, int submode)
+{
+	struct udevice *dev = phy->dev;
+	struct jh7110_usb2_phy *usb2_phy = dev_get_priv(dev);
+
+	if (mode == usb2_phy->mode)
+		return 0;
+
+	switch (mode) {
+	case PHY_MODE_USB_HOST:
+	case PHY_MODE_USB_DEVICE:
+	case PHY_MODE_USB_OTG:
+		dev_dbg(dev, "Changing PHY to %d\n", mode);
+		usb2_phy->mode = mode;
+		usb2_set_ls_keepalive(usb2_phy, (mode != PHY_MODE_USB_DEVICE));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set default split usb 2.0 only mode */
+	regmap_field_write(usb2_phy->usb_split, true);
+
+	return 0;
+}
+
+static int jh7110_usb2_phy_init(struct phy *phy)
+{
+	struct udevice *dev = phy->dev;
+	struct jh7110_usb2_phy *usb2_phy = dev_get_priv(dev);
+	int ret;
+
+	ret = clk_set_rate(usb2_phy->usb_125m_clk, USB_PHY_CLK_RATE);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set 125m clock\n");
+		return ret;
+	}
+
+	return clk_prepare_enable(usb2_phy->app_125m);
+}
+
+static int jh7110_usb2_phy_exit(struct phy *phy)
+{
+	struct udevice *dev = phy->dev;
+	struct jh7110_usb2_phy *usb2_phy = dev_get_priv(dev);
+
+	clk_disable_unprepare(usb2_phy->app_125m);
+
+	return 0;
+}
+
+struct phy_ops jh7110_usb2_phy_ops = {
+	.init     = jh7110_usb2_phy_init,
+	.exit     = jh7110_usb2_phy_exit,
+	.set_mode = usb2_phy_set_mode,
+};
+
+int jh7110_usb2_phy_probe(struct udevice *dev)
+{
+	struct jh7110_usb2_phy *phy = dev_get_priv(dev);
+	ofnode node;
+	struct reg_field usb_split;
+	int ret;
+
+	phy->regs = dev_read_addr_ptr(dev);
+	if (!phy->regs)
+		return -EINVAL;
+
+	node = ofnode_by_compatible(ofnode_null(), "starfive,jh7110-sys-syscon");
+	if (!ofnode_valid(node)) {
+		dev_err(dev, "Can't get syscon dev node\n");
+		return -ENODEV;
+	}
+
+	phy->sys_syscon = syscon_node_to_regmap(node);
+	if (IS_ERR(phy->sys_syscon)) {
+		dev_err(dev, "Can't get syscon regmap: %d\n", ret);
+		return PTR_ERR(phy->sys_syscon);
+	}
+
+	usb_split.reg = SYSCON_USB_PDRSTN_REG_OFFSET;
+	usb_split.lsb = USB_PDRSTN_SPLIT_BIT;
+	usb_split.msb = USB_PDRSTN_SPLIT_BIT;
+	phy->usb_split = devm_regmap_field_alloc(dev, phy->sys_syscon, usb_split);
+	if (IS_ERR(phy->usb_split)) {
+		dev_err(dev, "USB split field init failed\n");
+		return PTR_ERR(phy->usb_split);
+	}
+
+	phy->usb_125m_clk = devm_clk_get(dev, "125m");
+	if (IS_ERR(phy->usb_125m_clk)) {
+		dev_err(dev, "Failed to get 125m clock\n");
+		return PTR_ERR(phy->usb_125m_clk);
+	}
+
+	phy->app_125m = devm_clk_get(dev, "app_125m");
+	if (IS_ERR(phy->app_125m)) {
+		dev_err(dev, "Failed to get app 125m clock\n");
+		return PTR_ERR(phy->app_125m);
+	}
+
+	return 0;
+}
+
+static const struct udevice_id jh7110_usb2_phy[] = {
+	{ .compatible = "starfive,jh7110-usb-phy"},
+	{},
+};
+
+U_BOOT_DRIVER(jh7110_usb2_phy) = {
+	.name = "jh7110_usb2_phy",
+	.id = UCLASS_PHY,
+	.of_match = jh7110_usb2_phy,
+	.probe = jh7110_usb2_phy_probe,
+	.ops = &jh7110_usb2_phy_ops,
+	.priv_auto	= sizeof(struct jh7110_usb2_phy),
+};
-- 
2.17.1