[PATCH 4/4] board: vexpress64: enable bloblist for SPL handoff

[Harrison Mutai <harrison.mutai@arm.com>]

Enable bloblist on vexpress64 platforms to facilitate information
passing from TF-A using the firmware handoff framework.

Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
---
 board/armltd/vexpress64/Kconfig         |  2 +-
 board/armltd/vexpress64/Makefile        |  5 ++++-
 board/armltd/vexpress64/vexpress64.c    |  4 ++++
 configs/vexpress_fvp_bloblist_defconfig |  5 +++++
 doc/board/armltd/vexpress64.rst         | 16 ++++++++++++++++
 5 files changed, 30 insertions(+), 2 deletions(-)
 create mode 100644 configs/vexpress_fvp_bloblist_defconfig

diff --git a/board/armltd/vexpress64/Kconfig b/board/armltd/vexpress64/Kconfig
index 584b5455e9..7e8709444f 100644
--- a/board/armltd/vexpress64/Kconfig
+++ b/board/armltd/vexpress64/Kconfig
@@ -28,7 +28,7 @@ choice
 config TARGET_VEXPRESS64_BASE_FVP
 	bool "Support Versatile Express ARMv8a FVP BASE model"
 	select VEXPRESS64_BASE_MODEL
-	imply OF_HAS_PRIOR_STAGE
+	imply OF_HAS_PRIOR_STAGE if !BLOBLIST
 
 config TARGET_VEXPRESS64_BASER_FVP
 	bool "Support Versatile Express ARMv8r64 FVP BASE model"
diff --git a/board/armltd/vexpress64/Makefile b/board/armltd/vexpress64/Makefile
index 1878fbed4e..b0dd1d0af8 100644
--- a/board/armltd/vexpress64/Makefile
+++ b/board/armltd/vexpress64/Makefile
@@ -3,5 +3,8 @@
 # (C) Copyright 2000-2004
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 
-obj-y	:= vexpress64.o lowlevel_init.o
+obj-y	:= vexpress64.o
+
+obj-$(CONFIG_OF_HAS_PRIOR_STAGE)	+= lowlevel_init.o
+
 obj-$(CONFIG_TARGET_VEXPRESS64_JUNO)	+= pcie.o
diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
index b5ede58757..0b75c1358f 100644
--- a/board/armltd/vexpress64/vexpress64.c
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -100,7 +100,9 @@ int dram_init_banksize(void)
  * Push the variable into the .data section so that it
  * does not get cleared later.
  */
+#ifdef CONFIG_OF_HAS_PRIOR_STAGE
 unsigned long __section(".data") prior_stage_fdt_address[2];
+#endif
 
 #ifdef CONFIG_OF_BOARD
 
@@ -151,6 +153,7 @@ static phys_addr_t find_dtb_in_nor_flash(const char *partname)
 }
 #endif
 
+#ifdef CONFIG_OF_HAS_PRIOR_STAGE
 /*
  * Filter for a valid DTB, as TF-A happens to provide a pointer to some
  * data structure using the DTB format, which we cannot use.
@@ -201,6 +204,7 @@ int board_fdt_blob_setup(void **fdtp)
 	return -ENXIO;
 }
 #endif
+#endif
 
 /* Actual reset is done via PSCI. */
 void reset_cpu(void)
diff --git a/configs/vexpress_fvp_bloblist_defconfig b/configs/vexpress_fvp_bloblist_defconfig
new file mode 100644
index 0000000000..dcc87db872
--- /dev/null
+++ b/configs/vexpress_fvp_bloblist_defconfig
@@ -0,0 +1,5 @@
+#include <configs/vexpress_fvp_defconfig>
+
+CONFIG_BLOBLIST=y
+CONFIG_BLOBLIST_PASSAGE=y
+CONFIG_BLOBLIST_SIZE_RELOC=0x10000
diff --git a/doc/board/armltd/vexpress64.rst b/doc/board/armltd/vexpress64.rst
index a7f771d266..4dadadb53d 100644
--- a/doc/board/armltd/vexpress64.rst
+++ b/doc/board/armltd/vexpress64.rst
@@ -43,6 +43,22 @@ Juno is an Arm development board with the following features:
 
 More details can be found in the board documentation [3]_.
 
+Bloblist Support
+----------------
+
+The ``vexpress_fvp_bloblist_defconfig`` configures U-Boot to be compiled for
+Vexpress64 with Bloblist as the primary method for information handoff between
+boot stages. U-Boot offers three methods to set up a bloblist: using a
+predefined bloblist at a specified address, dynamically allocating memory for a
+bloblist, or utilizing a standard passage-provided bloblist with automatic size
+detection.
+
+By default, ``vexpress_fvp_bloblist_defconfig`` uses the standard passage method
+(CONFIG_BLOBLIST_PASSAGE) because TF-A provides a Transfer List in non-secure
+memory that U-Boot can utilise. This Bloblist, which is referred to as a Transfer List in
+TF-A, contains all necessary data for the handoff process, including DT and ACPI
+tables.
+
 References
 ----------
 
-- 
2.46.2