From: Manikandan Muralidharan <manikandan.m@microchip.com>
To: Eugen Hristev <eugen.hristev@linaro.org>,
Lukasz Majewski <lukma@denx.de>, <seanga2@gmail.com>,
<sumit.garg@linaro.org>, <kever.yang@rock-chips.com>,
<marek.vasut+renesas@mailbox.org>, <jonas@kwiboo.se>,
<festevam@denx.de>, <Oliver.Gaskell@analog.com>,
<aford173@gmail.com>, <prasad.kummari@amd.com>,
<caleb.connolly@linaro.org>, <andre.przywara@arm.com>,
<neil.armstrong@linaro.org>, <mibodhi@gmail.com>,
<nicolas.ferre@microchip.com>, <mihai.sain@microchip.com>,
<sjg@chromium.org>, <u-boot@lists.denx.de>
Cc: <manikandan.m@microchip.com>
Subject: [PATCH v3 1/8] dt-bindings: clock: rename at91.h to at91-pmc-status.h
Date: Wed, 5 Mar 2025 11:37:04 +0530 [thread overview]
Message-ID: <20250305060711.1127301-2-manikandan.m@microchip.com> (raw)
In-Reply-To: <20250305060711.1127301-1-manikandan.m@microchip.com>
Rename the include at91.h to at91-pmc-status.h to avoid conflicts with
the upstream bindings that has the same file and update the
relevant legacy SoC Device Trees to reflect this change.
This is useful while compiling the DT and driver of the new SoC files with
OF_UPSTREAM enabled.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
---
MAINTAINERS | 2 +-
arch/arm/dts/at91-sama7g5ek-u-boot.dtsi | 2 +-
arch/arm/dts/at91sam9260.dtsi | 2 +-
arch/arm/dts/at91sam9261.dtsi | 2 +-
arch/arm/dts/at91sam9263.dtsi | 2 +-
arch/arm/dts/at91sam9g45.dtsi | 2 +-
arch/arm/dts/at91sam9n12.dtsi | 2 +-
arch/arm/dts/at91sam9rl.dtsi | 2 +-
arch/arm/dts/at91sam9x5.dtsi | 2 +-
arch/arm/dts/sama5d3.dtsi | 2 +-
arch/arm/dts/sama5d3_mci2.dtsi | 2 +-
arch/arm/dts/sama5d3_tcb1.dtsi | 2 +-
arch/arm/dts/sama5d3_uart.dtsi | 2 +-
arch/arm/dts/sama5d4.dtsi | 2 +-
include/dt-bindings/clock/{at91.h => at91-pmc-status.h} | 0
15 files changed, 14 insertions(+), 14 deletions(-)
rename include/dt-bindings/clock/{at91.h => at91-pmc-status.h} (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 10f7f1fd180..d50841a4a41 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -464,7 +464,7 @@ F: drivers/memory/atmel-ebi.c
F: drivers/misc/microchip_flexcom.c
F: drivers/timer/atmel_tcb_timer.c
F: include/dt-bindings/clk/at91.h
-F: include/dt-bindings/clock/at91.h
+F: include/dt-bindings/clock/at91-pmc-status.h
F: include/dt-bindings/dma/at91.h
F: include/dt-bindings/mfd/at91-usart.h
F: include/dt-bindings/mfd/atmel-flexcom.h
diff --git a/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi b/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi
index 8b2e990de72..6e5ca0fb4ce 100644
--- a/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi
+++ b/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi
@@ -12,7 +12,7 @@
#include "sama7g5-pinfunc.h"
#include <dt-bindings/reset/sama7g5-reset.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
/ {
chosen {
diff --git a/arch/arm/dts/at91sam9260.dtsi b/arch/arm/dts/at91sam9260.dtsi
index 8d496205523..4ccfe2b9e4b 100644
--- a/arch/arm/dts/at91sam9260.dtsi
+++ b/arch/arm/dts/at91sam9260.dtsi
@@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
/ {
model = "Atmel AT91SAM9260 family SoC";
diff --git a/arch/arm/dts/at91sam9261.dtsi b/arch/arm/dts/at91sam9261.dtsi
index 65e0e4f0de0..0c7485bff98 100644
--- a/arch/arm/dts/at91sam9261.dtsi
+++ b/arch/arm/dts/at91sam9261.dtsi
@@ -10,7 +10,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
/ {
model = "Atmel AT91SAM9261 family SoC";
diff --git a/arch/arm/dts/at91sam9263.dtsi b/arch/arm/dts/at91sam9263.dtsi
index 55b79667564..e5d1cc04f5c 100644
--- a/arch/arm/dts/at91sam9263.dtsi
+++ b/arch/arm/dts/at91sam9263.dtsi
@@ -10,7 +10,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
/ {
model = "Atmel AT91SAM9263 family SoC";
diff --git a/arch/arm/dts/at91sam9g45.dtsi b/arch/arm/dts/at91sam9g45.dtsi
index 63a061354e4..5c79f33f48d 100644
--- a/arch/arm/dts/at91sam9g45.dtsi
+++ b/arch/arm/dts/at91sam9g45.dtsi
@@ -14,7 +14,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
/ {
model = "Atmel AT91SAM9G45 family SoC";
diff --git a/arch/arm/dts/at91sam9n12.dtsi b/arch/arm/dts/at91sam9n12.dtsi
index 84089837013..5034db0b617 100644
--- a/arch/arm/dts/at91sam9n12.dtsi
+++ b/arch/arm/dts/at91sam9n12.dtsi
@@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
/ {
model = "Atmel AT91SAM9N12 SoC";
diff --git a/arch/arm/dts/at91sam9rl.dtsi b/arch/arm/dts/at91sam9rl.dtsi
index 3b99de21058..8fa8067709c 100644
--- a/arch/arm/dts/at91sam9rl.dtsi
+++ b/arch/arm/dts/at91sam9rl.dtsi
@@ -8,7 +8,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
diff --git a/arch/arm/dts/at91sam9x5.dtsi b/arch/arm/dts/at91sam9x5.dtsi
index 4c6d8b9bb65..1922c5f03e0 100644
--- a/arch/arm/dts/at91sam9x5.dtsi
+++ b/arch/arm/dts/at91sam9x5.dtsi
@@ -14,7 +14,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
/ {
model = "Atmel AT91SAM9x5 family SoC";
diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
index 10d6e74586d..bb9290fba57 100644
--- a/arch/arm/dts/sama5d3.dtsi
+++ b/arch/arm/dts/sama5d3.dtsi
@@ -13,7 +13,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
/ {
model = "Atmel SAMA5D3 family SoC";
diff --git a/arch/arm/dts/sama5d3_mci2.dtsi b/arch/arm/dts/sama5d3_mci2.dtsi
index 2d289ed7be8..05753edeb0f 100644
--- a/arch/arm/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/dts/sama5d3_mci2.dtsi
@@ -9,7 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
/ {
ahb {
diff --git a/arch/arm/dts/sama5d3_tcb1.dtsi b/arch/arm/dts/sama5d3_tcb1.dtsi
index 5be60b4f8b1..0d96fe77723 100644
--- a/arch/arm/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/dts/sama5d3_tcb1.dtsi
@@ -9,7 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
/ {
aliases {
diff --git a/arch/arm/dts/sama5d3_uart.dtsi b/arch/arm/dts/sama5d3_uart.dtsi
index 6a547fdadcc..10f36eb3ac2 100644
--- a/arch/arm/dts/sama5d3_uart.dtsi
+++ b/arch/arm/dts/sama5d3_uart.dtsi
@@ -9,7 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
/ {
aliases {
diff --git a/arch/arm/dts/sama5d4.dtsi b/arch/arm/dts/sama5d4.dtsi
index 482cf03e61b..af5e9bd6dba 100644
--- a/arch/arm/dts/sama5d4.dtsi
+++ b/arch/arm/dts/sama5d4.dtsi
@@ -44,7 +44,7 @@
*/
#include "skeleton.dtsi"
-#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/clock/at91-pmc-status.h>
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91-pmc-status.h
similarity index 100%
rename from include/dt-bindings/clock/at91.h
rename to include/dt-bindings/clock/at91-pmc-status.h
--
2.25.1
next prev parent reply other threads:[~2025-03-05 6:08 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-05 6:07 [PATCH v3 0/8] Add support for sam9x7 SoC and SAM9X75 Curiosity board Manikandan Muralidharan
2025-03-05 6:07 ` Manikandan Muralidharan [this message]
2025-03-06 7:00 ` [PATCH v3 1/8] dt-bindings: clock: rename at91.h to at91-pmc-status.h Sumit Garg
2025-03-06 10:39 ` Manikandan.M
2025-03-07 6:16 ` Sumit Garg
2025-03-17 5:40 ` Manikandan.M
2025-03-07 13:19 ` Eugen Hristev
2025-03-05 6:07 ` [PATCH v3 2/8] clk: at91: sam9x60-pll: add support for core clock frequency inputs Manikandan Muralidharan
2025-03-05 6:07 ` [PATCH v3 3/8] clk: at91: sam9x60-pll: add support for HW PLL freq dividers Manikandan Muralidharan
2025-03-05 6:07 ` [PATCH v3 4/8] clk: at91: sam9x7: add pmc driver for sam9x7 SoC family Manikandan Muralidharan
2025-03-05 6:07 ` [PATCH v3 5/8] ARM: at91: Add sam9x7 soc Manikandan Muralidharan
2025-03-05 6:07 ` [PATCH v3 6/8] ARM: dts: at91: sam9x75_curiosity: add tweaks for sam9x75 curiosity board Manikandan Muralidharan
2025-03-05 6:07 ` [PATCH v3 7/8] board: sam9x75_curiosity: Add support for sam9x75 curiosity Manikandan Muralidharan
2025-03-05 6:07 ` [PATCH v3 8/8] configs: sam9x75_curiosity: Add initial mmc default config Manikandan Muralidharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250305060711.1127301-2-manikandan.m@microchip.com \
--to=manikandan.m@microchip.com \
--cc=Oliver.Gaskell@analog.com \
--cc=aford173@gmail.com \
--cc=andre.przywara@arm.com \
--cc=caleb.connolly@linaro.org \
--cc=eugen.hristev@linaro.org \
--cc=festevam@denx.de \
--cc=jonas@kwiboo.se \
--cc=kever.yang@rock-chips.com \
--cc=lukma@denx.de \
--cc=marek.vasut+renesas@mailbox.org \
--cc=mibodhi@gmail.com \
--cc=mihai.sain@microchip.com \
--cc=neil.armstrong@linaro.org \
--cc=nicolas.ferre@microchip.com \
--cc=prasad.kummari@amd.com \
--cc=seanga2@gmail.com \
--cc=sjg@chromium.org \
--cc=sumit.garg@linaro.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox