From: Andrew Davis <afd@ti.com>
To: Neha Malcom Francis <n-francis@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>, Nishanth Menon <nm@ti.com>,
Simon Glass <sjg@chromium.org>, Tom Rini <trini@konsulko.com>
Cc: <u-boot@lists.denx.de>, Andrew Davis <afd@ti.com>
Subject: [PATCH 2/3] arm: mach-k3: Enable BINMAN Kconfig symbol for all ARCH_K3
Date: Wed, 19 Mar 2025 14:29:57 -0500 [thread overview]
Message-ID: <20250319192958.276563-2-afd@ti.com> (raw)
In-Reply-To: <20250319192958.276563-1-afd@ti.com>
All K3 build need BINMAN support so select it under ARCH_K3,
not individually for each board target.
Signed-off-by: Andrew Davis <afd@ti.com>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-k3/am62ax/Kconfig | 4 ----
arch/arm/mach-k3/am62px/Kconfig | 2 --
arch/arm/mach-k3/am62x/Kconfig | 6 ------
arch/arm/mach-k3/am64x/Kconfig | 4 ----
arch/arm/mach-k3/am65x/Kconfig | 3 ---
arch/arm/mach-k3/j721e/Kconfig | 4 ----
arch/arm/mach-k3/j721s2/Kconfig | 2 --
arch/arm/mach-k3/j722s/Kconfig | 2 --
arch/arm/mach-k3/j784s4/Kconfig | 2 --
board/beagle/beagleboneai64/Kconfig | 2 --
board/beagle/beagleplay/Kconfig | 2 --
12 files changed, 1 insertion(+), 33 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index da6f1174934..c63bb772d75 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -809,6 +809,7 @@ config ARCH_KEYSTONE
config ARCH_K3
bool "Texas Instruments' K3 Architecture"
+ select BINMAN
select SPL
select SUPPORT_SPL
select FIT
diff --git a/arch/arm/mach-k3/am62ax/Kconfig b/arch/arm/mach-k3/am62ax/Kconfig
index 6f6ac35c1d8..151fc6b592e 100644
--- a/arch/arm/mach-k3/am62ax/Kconfig
+++ b/arch/arm/mach-k3/am62ax/Kconfig
@@ -12,7 +12,6 @@ choice
config TARGET_AM62A7_A53_EVM
bool "TI K3 based AM62A7 EVM running on A53"
select ARM64
- select BINMAN
select OF_SYSTEM_SETUP
imply TI_I2C_BOARD_DETECT
@@ -24,14 +23,12 @@ config TARGET_AM62A7_R5_EVM
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
imply TI_I2C_BOARD_DETECT
config TARGET_PHYCORE_AM62AX_A53
bool "PHYTEC phyCORE-AM62Ax running on A53"
select ARM64
- select BINMAN
select OF_SYSTEM_SETUP
imply OF_UPSTREAM
imply BOARD
@@ -45,7 +42,6 @@ config TARGET_PHYCORE_AM62AX_R5
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
endchoice
diff --git a/arch/arm/mach-k3/am62px/Kconfig b/arch/arm/mach-k3/am62px/Kconfig
index 76ae86b6622..cd23740d7bc 100644
--- a/arch/arm/mach-k3/am62px/Kconfig
+++ b/arch/arm/mach-k3/am62px/Kconfig
@@ -12,7 +12,6 @@ choice
config TARGET_AM62P5_A53_EVM
bool "TI K3 based AM62P5 EVM running on A53"
select ARM64
- select BINMAN
select OF_SYSTEM_SETUP
config TARGET_AM62P5_R5_EVM
@@ -23,7 +22,6 @@ config TARGET_AM62P5_R5_EVM
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
endchoice
diff --git a/arch/arm/mach-k3/am62x/Kconfig b/arch/arm/mach-k3/am62x/Kconfig
index 81199ada3a1..0f16cfa8b92 100644
--- a/arch/arm/mach-k3/am62x/Kconfig
+++ b/arch/arm/mach-k3/am62x/Kconfig
@@ -12,7 +12,6 @@ choice
config TARGET_AM625_A53_EVM
bool "TI K3 based AM625 EVM running on A53"
select ARM64
- select BINMAN
select OF_SYSTEM_SETUP
config TARGET_AM625_R5_EVM
@@ -23,13 +22,11 @@ config TARGET_AM625_R5_EVM
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
config TARGET_PHYCORE_AM62X_A53
bool "PHYTEC phyCORE-AM62x running on A53"
select ARM64
- select BINMAN
select OF_SYSTEM_SETUP
imply OF_UPSTREAM
@@ -41,14 +38,12 @@ config TARGET_PHYCORE_AM62X_R5
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
select PHYTEC_K3_DDR_PATCH
imply SYS_K3_SPL_ATF
config TARGET_VERDIN_AM62_A53
bool "Toradex Verdin AM62 running on A53"
select ARM64
- select BINMAN
select OF_SYSTEM_SETUP
imply OF_UPSTREAM
@@ -60,7 +55,6 @@ config TARGET_VERDIN_AM62_R5
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
endchoice
diff --git a/arch/arm/mach-k3/am64x/Kconfig b/arch/arm/mach-k3/am64x/Kconfig
index 28691ffb227..4a1cae3d0f2 100644
--- a/arch/arm/mach-k3/am64x/Kconfig
+++ b/arch/arm/mach-k3/am64x/Kconfig
@@ -12,7 +12,6 @@ choice
config TARGET_AM642_A53_EVM
bool "TI K3 based AM642 EVM running on A53"
select ARM64
- select BINMAN
imply TI_I2C_BOARD_DETECT
config TARGET_AM642_R5_EVM
@@ -23,14 +22,12 @@ config TARGET_AM642_R5_EVM
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
imply TI_I2C_BOARD_DETECT
config TARGET_PHYCORE_AM64X_A53
bool "PHYTEC phyCORE-AM64x running on A53"
select ARM64
- select BINMAN
imply BOARD
imply SPL_BOARD
imply OF_UPSTREAM
@@ -43,7 +40,6 @@ config TARGET_PHYCORE_AM64X_R5
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
endchoice
diff --git a/arch/arm/mach-k3/am65x/Kconfig b/arch/arm/mach-k3/am65x/Kconfig
index 72a8298aebf..e823549b535 100644
--- a/arch/arm/mach-k3/am65x/Kconfig
+++ b/arch/arm/mach-k3/am65x/Kconfig
@@ -14,7 +14,6 @@ config TARGET_AM654_A53_EVM
select ARM64
select SYS_DISABLE_DCACHE_OPS
select BOARD_LATE_INIT
- select BINMAN
imply TI_I2C_BOARD_DETECT
select OF_UPSTREAM
@@ -24,7 +23,6 @@ config TARGET_AM654_R5_EVM
select SYS_THUMB_BUILD
select K3_LOAD_SYSFW
select K3_AM654_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
imply TI_I2C_BOARD_DETECT
@@ -34,7 +32,6 @@ config TARGET_IOT2050_A53
select ARM64
select BOARD_LATE_INIT
select SYS_DISABLE_DCACHE_OPS
- select BINMAN
help
This builds U-Boot for the IOT2050 devices.
diff --git a/arch/arm/mach-k3/j721e/Kconfig b/arch/arm/mach-k3/j721e/Kconfig
index 0761b82b15a..32d5bbfda66 100644
--- a/arch/arm/mach-k3/j721e/Kconfig
+++ b/arch/arm/mach-k3/j721e/Kconfig
@@ -15,7 +15,6 @@ config TARGET_J721E_A72_EVM
select BOARD_LATE_INIT
imply TI_I2C_BOARD_DETECT
select SYS_DISABLE_DCACHE_OPS
- select BINMAN
config TARGET_J721E_R5_EVM
bool "TI K3 based J721E EVM running on R5"
@@ -25,7 +24,6 @@ config TARGET_J721E_R5_EVM
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
imply TI_I2C_BOARD_DETECT
@@ -36,7 +34,6 @@ config TARGET_J7200_A72_EVM
select BOARD_LATE_INIT
imply TI_I2C_BOARD_DETECT
select SYS_DISABLE_DCACHE_OPS
- select BINMAN
config TARGET_J7200_R5_EVM
bool "TI K3 based J7200 EVM running on R5"
@@ -46,7 +43,6 @@ config TARGET_J7200_R5_EVM
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
imply TI_I2C_BOARD_DETECT
diff --git a/arch/arm/mach-k3/j721s2/Kconfig b/arch/arm/mach-k3/j721s2/Kconfig
index 8b54c0401b6..4872166fefd 100644
--- a/arch/arm/mach-k3/j721s2/Kconfig
+++ b/arch/arm/mach-k3/j721s2/Kconfig
@@ -15,7 +15,6 @@ config TARGET_J721S2_A72_EVM
select BOARD_LATE_INIT
imply TI_I2C_BOARD_DETECT
select SYS_DISABLE_DCACHE_OPS
- select BINMAN
config TARGET_J721S2_R5_EVM
bool "TI K3 based J721S2 EVM running on R5"
@@ -25,7 +24,6 @@ config TARGET_J721S2_R5_EVM
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
imply TI_I2C_BOARD_DETECT
diff --git a/arch/arm/mach-k3/j722s/Kconfig b/arch/arm/mach-k3/j722s/Kconfig
index 39d38ea5cf5..ce63168187e 100644
--- a/arch/arm/mach-k3/j722s/Kconfig
+++ b/arch/arm/mach-k3/j722s/Kconfig
@@ -12,7 +12,6 @@ choice
config TARGET_J722S_A53_EVM
bool "TI K3 based J722S EVM running on A53"
select ARM64
- select BINMAN
select OF_SYSTEM_SETUP
config TARGET_J722S_R5_EVM
@@ -23,7 +22,6 @@ config TARGET_J722S_R5_EVM
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
endchoice
diff --git a/arch/arm/mach-k3/j784s4/Kconfig b/arch/arm/mach-k3/j784s4/Kconfig
index 1eadfb346a3..c6a3689ce08 100644
--- a/arch/arm/mach-k3/j784s4/Kconfig
+++ b/arch/arm/mach-k3/j784s4/Kconfig
@@ -14,7 +14,6 @@ config TARGET_J784S4_A72_EVM
select ARM64
select BOARD_LATE_INIT
select SYS_DISABLE_DCACHE_OPS
- select BINMAN
config TARGET_J784S4_R5_EVM
bool "TI K3 based J784S4 EVM running on R5"
@@ -24,7 +23,6 @@ config TARGET_J784S4_R5_EVM
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
endchoice
diff --git a/board/beagle/beagleboneai64/Kconfig b/board/beagle/beagleboneai64/Kconfig
index 0f21582614d..41f3f02f5c3 100644
--- a/board/beagle/beagleboneai64/Kconfig
+++ b/board/beagle/beagleboneai64/Kconfig
@@ -13,7 +13,6 @@ config TARGET_J721E_A72_BEAGLEBONEAI64
bool "BeagleBoard.org J721E BeagleBone AI-64 running on A72"
select ARM64
select SYS_DISABLE_DCACHE_OPS
- select BINMAN
config TARGET_J721E_R5_BEAGLEBONEAI64
bool "BeagleBoard.org J721E BeagleBone AI-64 running on R5"
@@ -23,7 +22,6 @@ config TARGET_J721E_R5_BEAGLEBONEAI64
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
endchoice
diff --git a/board/beagle/beagleplay/Kconfig b/board/beagle/beagleplay/Kconfig
index 592b53e493c..d691a0c5e02 100644
--- a/board/beagle/beagleplay/Kconfig
+++ b/board/beagle/beagleplay/Kconfig
@@ -11,7 +11,6 @@ choice
config TARGET_AM625_A53_BEAGLEPLAY
bool "BeagleBoard.org AM625 BeaglePlay running on A53"
select ARM64
- select BINMAN
select OF_SYSTEM_SETUP
config TARGET_AM625_R5_BEAGLEPLAY
@@ -22,7 +21,6 @@ config TARGET_AM625_R5_BEAGLEPLAY
select RAM
select SPL_RAM
select K3_DDRSS
- select BINMAN
imply SYS_K3_SPL_ATF
endchoice
--
2.39.2
next prev parent reply other threads:[~2025-03-19 19:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-19 19:29 [PATCH 1/3] arm: mach-k3: Remove undefined Kconfig symbols BOARD and SPL_BOARD Andrew Davis
2025-03-19 19:29 ` Andrew Davis [this message]
2025-03-19 19:29 ` [PATCH 3/3] arm: mach-k3: Make K3_LOAD_SYSFW and SYS_K3_SPL_ATF default enabled Andrew Davis
2025-04-05 15:34 ` [PATCH 1/3] arm: mach-k3: Remove undefined Kconfig symbols BOARD and SPL_BOARD Tom Rini
2025-04-06 15:38 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250319192958.276563-2-afd@ti.com \
--to=afd@ti.com \
--cc=n-francis@ti.com \
--cc=nm@ti.com \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox