From: Zixun LI <admin@hifiphile.com>
To: Eugen Hristev <eugen.hristev@linaro.org>,
Tom Rini <trini@konsulko.com>, Lukasz Majewski <lukma@denx.de>,
Mattijs Korpershoek <mkorpershoek@baylibre.com>,
Marek Vasut <marex@denx.de>
Cc: Zixun LI <admin@hifiphile.com>, u-boot@lists.denx.de
Subject: [PATCH] usb: gadget: atmel: Add SAM9X60 support
Date: Sat, 22 Mar 2025 20:56:24 +0000 [thread overview]
Message-ID: <20250322205625.1330306-1-admin@hifiphile.com> (raw)
Add compatible "microchip,sam9x60-udc" and device tree binding.
Compared to SAM9X5 the only difference is the DPRAM memory from the
USB High Speed Device Port (UDPHS) hardware block was increased,
so we can reuse the same endpoint data.
Tested on SAM9X60-Curiosity board with nfs and ums commands.
Signed-off-by: Zixun LI <admin@hifiphile.com>
---
arch/arm/dts/sam9x60.dtsi | 14 ++++++++++++++
arch/arm/mach-at91/include/mach/atmel_usba_udc.h | 2 +-
drivers/usb/gadget/atmel_usba_udc.c | 1 +
3 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi
index 3b684fc63d5..96a8faf09b3 100644
--- a/arch/arm/dts/sam9x60.dtsi
+++ b/arch/arm/dts/sam9x60.dtsi
@@ -69,6 +69,20 @@
#size-cells = <1>;
ranges;
+ usb0: gadget@500000 {
+ compatible = "microchip,sam9x60-udc";
+ reg = <0x500000 0x100000>,
+ <0xf803c000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE 8>;
+ clock-names = "pclk", "hclk";
+ assigned-clocks = <&pmc PMC_TYPE_CORE 8>;
+ assigned-clock-rates = <480000000>;
+ status = "disabled";
+ };
+
usb1: usb@600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
diff --git a/arch/arm/mach-at91/include/mach/atmel_usba_udc.h b/arch/arm/mach-at91/include/mach/atmel_usba_udc.h
index 835b47d91ba..23c71985c90 100644
--- a/arch/arm/mach-at91/include/mach/atmel_usba_udc.h
+++ b/arch/arm/mach-at91/include/mach/atmel_usba_udc.h
@@ -20,7 +20,7 @@
}
#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
- defined(CONFIG_AT91SAM9X5)
+ defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAM9X60)
static struct usba_ep_data usba_udc_ep[] = {
EP("ep0", 0, 64, 1, 0, 0),
EP("ep1", 1, 1024, 2, 1, 1),
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index a77037a7094..f9326f0a7e7 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1443,6 +1443,7 @@ static const struct udevice_id usba_udc_ids[] = {
{ .compatible = "atmel,at91sam9rl-udc" },
{ .compatible = "atmel,at91sam9g45-udc" },
{ .compatible = "atmel,sama5d3-udc" },
+ { .compatible = "microchip,sam9x60-udc" },
{}
};
--
2.39.5
next reply other threads:[~2025-03-23 13:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-22 20:56 Zixun LI [this message]
2025-03-22 22:59 ` [PATCH] usb: gadget: atmel: Add SAM9X60 support Marek Vasut
2025-03-24 9:23 ` Eugen Hristev
2025-03-31 9:05 ` Mattijs Korpershoek
2025-03-31 9:26 ` Eugen Hristev
2025-03-31 9:39 ` Mattijs Korpershoek
2025-03-31 16:03 ` Zixun LI
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250322205625.1330306-1-admin@hifiphile.com \
--to=admin@hifiphile.com \
--cc=eugen.hristev@linaro.org \
--cc=lukma@denx.de \
--cc=marex@denx.de \
--cc=mkorpershoek@baylibre.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox