From: E Shattow <e@freeshell.de>
To: Tom Rini <trini@konsulko.com>,
Minda Chen <minda.chen@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
Heinrich Schuchardt <xypron.glpk@gmx.de>,
Simon Glass <sjg@chromium.org>
Cc: E Shattow <e@freeshell.de>, u-boot@lists.denx.de
Subject: [PATCH v1 1/2] doc: board: starfive: Drop setting of $fdtfile
Date: Mon, 21 Apr 2025 23:45:25 -0700 [thread overview]
Message-ID: <20250422064541.635210-2-e@freeshell.de> (raw)
In-Reply-To: <20250422064541.635210-1-e@freeshell.de>
Information about setting $fdtfile is covered by generic U-Boot docs. Drop
the redundant section.
Signed-off-by: E Shattow <e@freeshell.de>
---
doc/board/starfive/milk-v_mars.rst | 18 ------------------
doc/board/starfive/pine64_star64.rst | 16 ----------------
doc/board/starfive/visionfive2.rst | 18 ------------------
3 files changed, 52 deletions(-)
diff --git a/doc/board/starfive/milk-v_mars.rst b/doc/board/starfive/milk-v_mars.rst
index 554932ecfd4..9cfd5d7bddd 100644
--- a/doc/board/starfive/milk-v_mars.rst
+++ b/doc/board/starfive/milk-v_mars.rst
@@ -39,24 +39,6 @@ Now build the U-Boot SPL and U-Boot proper.
This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well
as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
-Device-tree selection
-~~~~~~~~~~~~~~~~~~~~~
-
-Depending on the board version U-Boot set variable $fdtfile to either
-starfive/jh7110-starfive-visionfive-2-v1.2a.dtb or
-starfive/jh7110-starfive-visionfive-2-v1.3b.dtb.
-
-To overrule this selection the variable can be set manually and saved in the
-environment
-
-::
-
- setenv fdtfile my_device-tree.dtb
- env save
-
-or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to set to
-provide a default value.
-
Boot source selection
~~~~~~~~~~~~~~~~~~~~~
diff --git a/doc/board/starfive/pine64_star64.rst b/doc/board/starfive/pine64_star64.rst
index 52e9a907917..1fdd1660a31 100644
--- a/doc/board/starfive/pine64_star64.rst
+++ b/doc/board/starfive/pine64_star64.rst
@@ -39,22 +39,6 @@ Now build the U-Boot SPL and U-Boot proper.
This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well
as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
-Device-tree selection
-~~~~~~~~~~~~~~~~~~~~~
-
-U-Boot will set variable $fdtfile to starfive/jh7110-pine64-star64.dtb.
-
-To overrule this selection the variable can be set manually and saved in the
-environment
-
-::
-
- env set fdtfile my_device-tree.dtb
- env save
-
-or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to set to
-provide a default value.
-
Boot source selection
~~~~~~~~~~~~~~~~~~~~~
diff --git a/doc/board/starfive/visionfive2.rst b/doc/board/starfive/visionfive2.rst
index 2c68df3ce4d..abda8ac21bc 100644
--- a/doc/board/starfive/visionfive2.rst
+++ b/doc/board/starfive/visionfive2.rst
@@ -71,24 +71,6 @@ Now build the U-Boot SPL and U-Boot proper
This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well
as the FIT image (u-boot.itb) with OpenSBI and U-Boot.
-Device-tree selection
-~~~~~~~~~~~~~~~~~~~~~
-
-Depending on the board version U-Boot set variable $fdtfile to either
-starfive/jh7110-starfive-visionfive-2-v1.2a.dtb or
-starfive/jh7110-starfive-visionfive-2-v1.3b.dtb.
-
-To overrule this selection the variable can be set manually and saved in the
-environment
-
-::
-
- setenv fdtfile my_device-tree.dtb
- env save
-
-or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to provide
-a default value.
-
Flashing
~~~~~~~~
--
2.49.0
next prev parent reply other threads:[~2025-04-22 6:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-22 6:45 [PATCH v1 0/2] jh7110: starfive: visionfive2 drop setting of $fdtfile E Shattow
2025-04-22 6:45 ` E Shattow [this message]
2025-04-22 6:45 ` [PATCH v1 2/2] board: starfive: visionfive2: Drop " E Shattow
2025-04-22 7:28 ` Heinrich Schuchardt
2025-04-22 9:50 ` E Shattow
2025-04-22 10:07 ` E Shattow
2025-04-22 15:17 ` Samuel Holland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250422064541.635210-2-e@freeshell.de \
--to=e@freeshell.de \
--cc=hal.feng@starfivetech.com \
--cc=minda.chen@starfivetech.com \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox