From: E Shattow <e@freeshell.de>
Cc: u-boot@lists.denx.de, E Shattow <e@freeshell.de>,
Rick Chen <rick@andestech.com>, Leo <ycliang@andestech.com>,
Minda Chen <minda.chen@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
Tom Rini <trini@konsulko.com>,
Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Subject: [PATCH v3 0/4] riscv: dts: starfive: prune redundant jh7110-common
Date: Tue, 16 Sep 2025 17:02:21 -0700 [thread overview]
Message-ID: <20250917000254.1134031-1-e@freeshell.de> (raw)
There are more than a few additional JH7110 CPU boards that may soon be
upstreamed. Each new variant supported by U-Boot has the burden of adding
a per-dts stub file for automatic dtsi inclusion by the build system. Also
i.e. the JH7110S CPU board introduced by StarFive is to be supported by
the same U-Boot starfive_visionfive2 target. Let's prepare for and clean
out (remove) per-dts file -u-boot.dtsi automatic inclusion stubs for all
dts that exist in dts/upstream/src subtree, making these per-dts
-u-boot.dtsi files unnecessary for future additions.
The last patch in this series anticipates additional CPU models for
starfive_visionfive2 config, changing from SYS_CPU automatic inclusion
dtsi to a filename more similar to the defconfig name via config Extra
dtsi inclusion. This also allows that any supported board for this config
which does need to use the per-dts automatic dtsi inclusion by the build
system may do so without having to include this common dtsi again.
Changes since v2:
- Drop PATCH 4/4 "visionfive2 depend on SYS_CONFIG_NAME automatic dtsi
inclusion"
- Add patch "Use visionfive2 DEVICE_TREE_INCLUDES dtsi named similar to
defconfig"
- Revise cover letter descriptions
E Shattow (4):
riscv: dts: starfive: prune redundant jh7110-common overrides
riscv: dts: starfive: sync visionfive2 overrides with upstream Linux
for-next
riscv: dts: starfive: visionfive2 depend on SYS_CPU automatic dtsi
inclusion
configs: starfive: Use visionfive2 DEVICE_TREE_INCLUDES dtsi named
similar to defconfig
arch/riscv/dts/jh7110-common-u-boot.dtsi | 99 -------------------
.../jh7110-deepcomputing-fml13v01-u-boot.dtsi | 7 --
arch/riscv/dts/jh7110-milkv-mars-u-boot.dtsi | 7 --
.../dts/jh7110-pine64-star64-u-boot.dtsi | 7 --
...10-starfive-visionfive-2-v1.2a-u-boot.dtsi | 7 --
...10-starfive-visionfive-2-v1.3b-u-boot.dtsi | 7 --
....dtsi => starfive-visionfive2-u-boot.dtsi} | 82 ++++++---------
configs/starfive_visionfive2_defconfig | 1 +
8 files changed, 33 insertions(+), 184 deletions(-)
delete mode 100644 arch/riscv/dts/jh7110-common-u-boot.dtsi
delete mode 100644 arch/riscv/dts/jh7110-deepcomputing-fml13v01-u-boot.dtsi
delete mode 100644 arch/riscv/dts/jh7110-milkv-mars-u-boot.dtsi
delete mode 100644 arch/riscv/dts/jh7110-pine64-star64-u-boot.dtsi
delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi
delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
rename arch/riscv/dts/{jh7110-u-boot.dtsi => starfive-visionfive2-u-boot.dtsi} (54%)
base-commit: b82fa9d752b025d3b5305b5b07debe6808a5d027
--
2.50.0
next reply other threads:[~2025-09-17 0:03 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-17 0:02 E Shattow [this message]
2025-09-17 0:02 ` [PATCH v3 1/4] riscv: dts: starfive: prune redundant jh7110-common overrides E Shattow
2025-09-19 10:51 ` Leo Liang
2025-09-17 0:02 ` [PATCH v3 2/4] riscv: dts: starfive: sync visionfive2 overrides with upstream Linux for-next E Shattow
2025-09-17 2:59 ` E Shattow
2025-09-19 10:58 ` Leo Liang
2025-09-17 0:02 ` [PATCH v3 3/4] riscv: dts: starfive: visionfive2 depend on SYS_CPU automatic dtsi inclusion E Shattow
2025-09-19 10:58 ` Leo Liang
2025-09-17 0:02 ` [PATCH v3 4/4] configs: starfive: Use visionfive2 DEVICE_TREE_INCLUDES dtsi named similar to defconfig E Shattow
2025-09-19 10:59 ` Leo Liang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250917000254.1134031-1-e@freeshell.de \
--to=e@freeshell.de \
--cc=hal.feng@starfivetech.com \
--cc=heinrich.schuchardt@canonical.com \
--cc=minda.chen@starfivetech.com \
--cc=rick@andestech.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox