From: Philip Oberfichtner <pro@denx.de>
To: u-boot@lists.denx.de
Cc: Philip Oberfichtner <pro@denx.de>,
Andre Przywara <andre.przywara@arm.com>,
Anshul Dalal <anshuld@ti.com>,
Dario Binacchi <dario.binacchi@amarulasolutions.com>,
Greg Malysa <malysagreg@gmail.com>,
Heinrich Schuchardt <heinrich.schuchardt@canonical.com>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
Jerome Forissier <jerome.forissier@linaro.org>,
Marek Vasut <marek.vasut@mailbox.org>,
Nathan Barrett-Morrison <nathan.morrison@timesys.com>,
Peng Fan <peng.fan@nxp.com>, Simon Glass <sjg@chromium.org>,
Tom Rini <trini@konsulko.com>,
Trevor Woerner <twoerner@gmail.com>, Ye Li <ye.li@nxp.com>
Subject: [PATCH v4 3/3] Image size checks: Deduplicate Makefile
Date: Wed, 15 Oct 2025 03:23:20 +0200 [thread overview]
Message-ID: <20251015012320.2331007-4-pro@denx.de> (raw)
In-Reply-To: <20251015012320.2331007-1-pro@denx.de>
Deduplicate some redundancies within the SIZE_CHECK code in the toplevel
Makefile. No functional changes.
Signed-off-by: Philip Oberfichtner <pro@denx.de>
---
Notes:
Changes in v4:
- Pass CONFIG_HAS_XXX_SIZE_LIMIT as an argument to size_check()
Makefile | 48 +++++++++++++-----------------------------------
1 file changed, 13 insertions(+), 35 deletions(-)
diff --git a/Makefile b/Makefile
index e68dce2c1d5..7b19610335f 100644
--- a/Makefile
+++ b/Makefile
@@ -428,10 +428,12 @@ KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
# Check ths size of a binary:
# Args:
# $1: File to check
-# #2: Size limit in bytes (decimal or 0xhex)
+# $2: Always return OK if this is not "y".
+# $3: Size limit in bytes (decimal or 0xhex)
define size_check
+ test "$2" = "y" || exit 0; \
actual=$$( wc -c $1 | awk '{print $$1}'); \
- limit=$$( printf "%d" $2 ); \
+ limit=$$( printf "%d" $3 ); \
if test $$actual -gt $$limit; then \
echo "$1 exceeds file size limit:" >&2; \
echo " limit: $$(printf %#x $$limit) bytes" >&2; \
@@ -1103,30 +1105,6 @@ LDPPFLAGS += \
#########################################################################
#########################################################################
-ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
-BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
-else
-BOARD_SIZE_CHECK =
-endif
-
-ifneq ($(CONFIG_SPL_SIZE_LIMIT),)
-SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
-else
-SPL_SIZE_CHECK =
-endif
-
-ifneq ($(CONFIG_TPL_SIZE_LIMIT),)
-TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
-else
-TPL_SIZE_CHECK =
-endif
-
-ifneq ($(CONFIG_VPL_SIZE_LIMIT),)
-VPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_VPL_SIZE_LIMIT))
-else
-VPL_SIZE_CHECK =
-endif
-
# Statically apply RELA-style relocations (currently arm64 only)
# This is useful for arm64 where static relocation needs to be performed on
# the raw binary, but certain simulators only accept an ELF file (but don't
@@ -1470,7 +1448,7 @@ endif
%.imx: $(IMX_DEPS) %.bin
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
- $(BOARD_SIZE_CHECK)
+ @$(call size_check,$@,$(CONFIG_HAS_BOARD_SIZE_LIMIT),$(CONFIG_BOARD_SIZE_LIMIT))
%.vyb: %.imx
$(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
@@ -1571,11 +1549,11 @@ endif
u-boot-nodtb.bin: u-boot FORCE
$(call if_changed,objcopy_uboot)
- $(BOARD_SIZE_CHECK)
+ @$(call size_check,$@,$(CONFIG_HAS_BOARD_SIZE_LIMIT),$(CONFIG_BOARD_SIZE_LIMIT))
u-boot.ldr: u-boot
$(LDR) -T $(CONFIG_LDR_CPU) -c $@ $< $(LDR_FLAGS)
- $(BOARD_SIZE_CHECK)
+ @$(call size_check,$@,$(CONFIG_HAS_BOARD_SIZE_LIMIT),$(CONFIG_BOARD_SIZE_LIMIT))
# binman
# ---------------------------------------------------------------------------
@@ -1702,7 +1680,7 @@ u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
,$(UBOOT_BIN)) FORCE
$(call if_changed,mkimage)
- $(BOARD_SIZE_CHECK)
+ @$(call size_check,$@,$(CONFIG_HAS_BOARD_SIZE_LIMIT),$(CONFIG_BOARD_SIZE_LIMIT))
ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
MKIMAGEFLAGS_u-boot.itb =
@@ -1717,12 +1695,12 @@ u-boot.itb: u-boot-nodtb.bin \
$(if $(CONFIG_MULTI_DTB_FIT),$(FINAL_DTB_CONTAINER)) \
$(U_BOOT_ITS) FORCE
$(call if_changed,mkfitimage)
- $(BOARD_SIZE_CHECK)
+ @$(call size_check,$@,$(CONFIG_HAS_BOARD_SIZE_LIMIT),$(CONFIG_BOARD_SIZE_LIMIT))
endif
u-boot-with-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
- $(BOARD_SIZE_CHECK)
+ @$(call size_check,$@,$(CONFIG_HAS_BOARD_SIZE_LIMIT),$(CONFIG_BOARD_SIZE_LIMIT))
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
@@ -2346,7 +2324,7 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE
spl/u-boot-spl.bin: spl/u-boot-spl
@:
- $(SPL_SIZE_CHECK)
+ @$(call size_check,$@,$(CONFIG_HAS_SPL_SIZE_LIMIT),$$(tools/spl_size_limit))
spl/u-boot-spl-dtb.bin: spl/u-boot-spl
@:
@@ -2371,14 +2349,14 @@ spl/boot.bin: spl/u-boot-spl
tpl/u-boot-tpl.bin: tpl/u-boot-tpl
@:
- $(TPL_SIZE_CHECK)
+ @$(call size_check,$@,$(CONFIG_HAS_TPL_SIZE_LIMIT),$(CONFIG_TPL_SIZE_LIMIT))
tpl/u-boot-tpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
$(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.xpl all
vpl/u-boot-vpl.bin: vpl/u-boot-vpl
@:
- $(VPL_SIZE_CHECK)
+ @$(call size_check,$@,$(CONFIG_HAS_VPL_SIZE_LIMIT),$(CONFIG_VPL_SIZE_LIMIT))
vpl/u-boot-vpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
$(Q)$(MAKE) obj=vpl -f $(srctree)/scripts/Makefile.xpl all
--
2.39.5
next prev parent reply other threads:[~2025-10-15 1:24 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-15 1:23 [PATCH v4 0/3] Harmonize image size checks Philip Oberfichtner
2025-10-15 1:23 ` [PATCH v4 1/3] Image size checks: Use HAS_SIZE_LIMIT consistently Philip Oberfichtner
2025-11-09 18:41 ` Marek Vasut
2025-11-10 7:46 ` Philip Oberfichtner
2025-10-15 1:23 ` [PATCH v4 2/3] Image size checks: Clarify help texts Philip Oberfichtner
2025-11-09 18:55 ` Marek Vasut
2025-10-15 1:23 ` Philip Oberfichtner [this message]
2025-11-09 19:00 ` [PATCH v4 3/3] Image size checks: Deduplicate Makefile Marek Vasut
2025-11-04 11:28 ` [PATCH v4 0/3] Harmonize image size checks Philip Oberfichtner
2025-11-04 11:56 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251015012320.2331007-4-pro@denx.de \
--to=pro@denx.de \
--cc=andre.przywara@arm.com \
--cc=anshuld@ti.com \
--cc=dario.binacchi@amarulasolutions.com \
--cc=heinrich.schuchardt@canonical.com \
--cc=ilias.apalodimas@linaro.org \
--cc=jerome.forissier@linaro.org \
--cc=malysagreg@gmail.com \
--cc=marek.vasut@mailbox.org \
--cc=nathan.morrison@timesys.com \
--cc=peng.fan@nxp.com \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=twoerner@gmail.com \
--cc=u-boot@lists.denx.de \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox