U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: E Shattow <e@freeshell.de>
To: Rick Chen <rick@andestech.com>, Leo <ycliang@andestech.com>,
	Minda Chen <minda.chen@starfivetech.com>,
	Hal Feng <hal.feng@starfivetech.com>,
	Tom Rini <trini@konsulko.com>,
	Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: u-boot@lists.denx.de, E Shattow <e@freeshell.de>,
	Icenowy Zheng <uwu@icenowy.me>
Subject: [RFC PATCH v1 1/4] riscv: dts: starfive: Add Orange Pi RV from upstream Linux for-next
Date: Wed, 26 Nov 2025 14:15:26 -0800	[thread overview]
Message-ID: <20251126221552.87574-2-e@freeshell.de> (raw)
In-Reply-To: <20251126221552.87574-1-e@freeshell.de>

Import dts for Orange Pi RV as per-board automatic inclusion. This
commit should be reverted when devicetree-rebasing release candidate for
Linux 6.19 is sync'ed.

Signed-off-by: E Shattow <e@freeshell.de>
---
 arch/riscv/dts/jh7110-orangepi-rv-u-boot.dtsi | 76 +++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 arch/riscv/dts/jh7110-orangepi-rv-u-boot.dtsi

diff --git a/arch/riscv/dts/jh7110-orangepi-rv-u-boot.dtsi b/arch/riscv/dts/jh7110-orangepi-rv-u-boot.dtsi
new file mode 100644
index 00000000000..053c35992ec
--- /dev/null
+++ b/arch/riscv/dts/jh7110-orangepi-rv-u-boot.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "jh7110-common.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi RV";
+	compatible = "xunlong,orangepi-rv", "starfive,jh7110";
+
+	/* This regulator is always on by hardware */
+	reg_vcc3v3_pcie: regulator-vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3-pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&sysgpio 62 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+	starfive,tx-use-rgmii-clk;
+	status = "okay";
+};
+
+&mmc0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cap-sd-highspeed;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	vmmc-supply = <&reg_vcc3v3_pcie>;
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+
+	ap6256: wifi@1 {
+		compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		/* TODO: out-of-band IRQ on GPIO21, lacking pinctrl support */
+	};
+};
+
+&mmc1 {
+	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&phy0 {
+	rx-internal-delay-ps = <1500>;
+	tx-internal-delay-ps = <1500>;
+	motorcomm,rx-clk-drv-microamp = <3970>;
+	motorcomm,rx-data-drv-microamp = <2910>;
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-10-inverted;
+	motorcomm,tx-clk-100-inverted;
+	motorcomm,tx-clk-1000-inverted;
+};
+
+&pwmdac {
+	status = "okay";
+};
-- 
2.50.0


  reply	other threads:[~2025-11-26 22:17 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-26 22:15 [RFC PATCH v1 0/4] Add upstream board Xunlong Orange Pi RV E Shattow
2025-11-26 22:15 ` E Shattow [this message]
2025-11-26 22:15 ` [RFC PATCH v1 2/4] board: starfive: visionfive2: Add Orange Pi RV selection by product_id E Shattow
2025-11-26 22:15 ` [RFC PATCH v1 3/4] riscv: dts: Add placeholder files for pending upstream Orange Pi RV E Shattow
2025-11-26 22:15 ` [RFC PATCH v1 4/4] configs: starfive: Add Orange Pi RV to visionfive2 E Shattow
2025-11-26 22:34 ` [RFC PATCH v1 0/4] Add upstream board Xunlong Orange Pi RV Heinrich Schuchardt
2025-11-26 23:42   ` E Shattow
2025-11-27  5:21     ` Icenowy Zheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251126221552.87574-2-e@freeshell.de \
    --to=e@freeshell.de \
    --cc=hal.feng@starfivetech.com \
    --cc=minda.chen@starfivetech.com \
    --cc=rick@andestech.com \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    --cc=uwu@icenowy.me \
    --cc=xypron.glpk@gmx.de \
    --cc=ycliang@andestech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox