From: Greg Malysa <malysagreg@gmail.com>
To: u-boot@lists.denx.de
Cc: adsp-linux@analog.com, Greg Malysa <malysagreg@gmail.com>,
Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>,
Arturs Artamonovs <arturs.artamonovs@analog.com>,
Caleb Ethridge <caleb.ethridge@analog.com>,
Heiko Schocher <hs@nabladev.com>,
Heinrich Schuchardt <xypron.glpk@gmx.de>,
Ian Roberts <ian.roberts@timesys.com>,
Jerome Forissier <jerome.forissier@linaro.org>,
"Kory Maincent (TI.com)" <kory.maincent@bootlin.com>,
Marek Vasut <marex@denx.de>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Mattijs Korpershoek <mkorpershoek@kernel.org>,
Nathan Barrett-Morrison <nathan.morrison@timesys.com>,
Oliver Gaskell <Oliver.Gaskell@analog.com>,
Peng Fan <peng.fan@nxp.com>,
Philip Molloy <philip.molloy@analog.com>,
Philip Molloy <philip@philipmolloy.com>,
Raymond Mao <raymondmaoca@gmail.com>,
Simon Glass <sjg@chromium.org>,
Stefan Roese <stefan.roese@mailbox.org>,
Sumit Garg <sumit.garg@kernel.org>, Tom Rini <trini@konsulko.com>,
Utsav Agarwal <utsav.agarwal@analog.com>,
Vasileios Bimpikas <vasileios.bimpikas@analog.com>,
Yao Zi <me@ziyao.cc>
Subject: [PATCH 00/12] sc5xx: Add complete board support for all ADI SC5xx boards
Date: Thu, 11 Dec 2025 03:03:51 -0500 [thread overview]
Message-ID: <20251211080414.5363-1-malysagreg@gmail.com> (raw)
This series adds the final pieces to enable mainline U-Boot to build and
boot all Analog Devices SC5xx SoCs and supports the associated carrier
board options. At this point it should be viable for new users for these
platforms to start with the latest version of U-Boot rather than our
vendor fork, however some features (such as OSPI support and falcon
boot) remain unavailable until we are able to unify our implementations
with the mainline implementations.
Changes in v3:
- CI results: https://gitlab.com/gmalysa/lnxdsp-u-boot/-/pipelines/2205787455
Changes in v2:
- Rebased series to latest u-boot master
- Replaced SC_BOOT_MODE Kconfig with SC_BCODE
- Use Kconfig to restrict choices between EZKIT and EZLITE carriers when
appropriate
- Separate dtsi for revD and revE of sc598 SOM. RevE is the default but
revD is included so that any customers with older hardware can boot it
with a single change to the .dts
- Fixed GPIO naming and polarity to use only positive names (such as
gige-reset rather than ~gige-reset) and set the active low/high flag
appropriately, with all code references updated to reflect logical
values rather than voltage levels
Greg Malysa (10):
mach-sc5xx: Rename SC_BOOT_MODE
mach-sc5xx: Kconfig: Make EZKIT and EZLITE carriers mutually exclusive
docker: add Analog Devices tools to docker image
board: adi: Add SOMCRR infrastructure
board: adi: Add support for SC573-ezkit
board: adi: Add support for SC589 boards
board: adi: Add support for SC584-ezkit
board: adi: Add support for SC598
board: adi: Add support for SC594
MAINTAINERS: Update ADI entries for new boards
Utsav Agarwal (2):
mach-sc5xx: Introduce Kconfig symbols for image addresses
mach-sc5xx: Add preliminary support for binman
MAINTAINERS | 2 +
arch/arm/dts/sc573-ezkit.dts | 240 ++++++++++++++++++
arch/arm/dts/sc57x.dtsi | 123 ++++++++-
arch/arm/dts/sc584-ezkit.dts | 230 +++++++++++++++++
arch/arm/dts/sc589-ezkit.dts | 198 +++++++++++++++
arch/arm/dts/sc589-mini.dts | 18 +-
arch/arm/dts/sc58x.dtsi | 164 +++++++++++-
arch/arm/dts/sc594-som-ezkit.dts | 126 +++++++++
arch/arm/dts/sc594-som-ezlite.dts | 83 ++++++
arch/arm/dts/sc594-som.dtsi | 193 +++++++++++++-
arch/arm/dts/sc598-som-ezkit.dts | 168 +++++++++++-
arch/arm/dts/sc598-som-ezlite.dts | 84 +++++-
arch/arm/dts/sc598-som-revD.dtsi | 72 ++++++
arch/arm/dts/sc598-som-revE.dtsi | 97 +++++++
arch/arm/dts/sc598-som.dtsi | 154 ++++++++++-
arch/arm/dts/sc59x.dtsi | 183 +++++++++++++
arch/arm/dts/sc5xx.dtsi | 189 +++++++++++++-
arch/arm/mach-sc5xx/Kconfig | 95 ++++++-
arch/arm/mach-sc5xx/config.mk | 2 +-
board/adi/carriers/Makefile | 8 +
board/adi/carriers/somcrr.h | 14 +
board/adi/carriers/somcrr_common.c | 19 ++
board/adi/carriers/somcrr_ezkit.c | 38 +++
board/adi/carriers/somcrr_ezlite.c | 24 ++
board/adi/common-sc594-som/sc594-som.c | 34 +++
board/adi/common-sc598-som/sc598-som.c | 34 +++
board/adi/sc573-ezkit/Makefile | 6 +
board/adi/sc573-ezkit/sc573-ezkit.c | 21 ++
board/adi/sc573-ezkit/sc573-ezkit.env | 18 +-
board/adi/sc584-ezkit/Makefile | 6 +
board/adi/sc584-ezkit/sc584-ezkit.c | 21 ++
board/adi/sc584-ezkit/sc584-ezkit.env | 17 +-
board/adi/sc589-ezkit/Makefile | 6 +
board/adi/sc589-ezkit/sc589-ezkit.c | 21 ++
board/adi/sc589-ezkit/sc589-ezkit.env | 18 +-
board/adi/sc589-mini/Makefile | 6 +
board/adi/sc589-mini/sc589-mini.c | 21 ++
board/adi/sc589-mini/sc589-mini.env | 18 +-
board/adi/sc594-som-ezkit/Makefile | 8 +
board/adi/sc594-som-ezkit/sc594-som-ezkit.env | 19 +-
board/adi/sc594-som-ezlite/Makefile | 8 +
.../adi/sc594-som-ezlite/sc594-som-ezlite.env | 19 +-
board/adi/sc598-som-ezkit/Makefile | 8 +
board/adi/sc598-som-ezkit/sc598-som-ezkit.env | 19 +-
board/adi/sc598-som-ezlite/Makefile | 8 +
.../adi/sc598-som-ezlite/sc598-som-ezlite.env | 13 +-
configs/sc573-ezkit_defconfig | 90 +++++++
configs/sc584-ezkit_defconfig | 96 +++++++
configs/sc589-ezkit_defconfig | 101 ++++++++
configs/sc589-mini_defconfig | 97 +++++++
configs/sc594-som-ezkit-spl_defconfig | 78 ++++++
configs/sc594-som-ezlite-spl_defconfig | 87 +++++++
configs/sc598-som-ezkit-spl_defconfig | 111 ++++++++
configs/sc598-som-ezlite-spl_defconfig | 110 ++++++++
tools/docker/Dockerfile | 16 ++
55 files changed, 3563 insertions(+), 96 deletions(-)
create mode 100644 arch/arm/dts/sc598-som-revD.dtsi
create mode 100644 arch/arm/dts/sc598-som-revE.dtsi
create mode 100644 arch/arm/dts/sc59x.dtsi
create mode 100644 board/adi/carriers/Makefile
create mode 100644 board/adi/carriers/somcrr.h
create mode 100644 board/adi/carriers/somcrr_common.c
create mode 100644 board/adi/carriers/somcrr_ezkit.c
create mode 100644 board/adi/carriers/somcrr_ezlite.c
create mode 100644 board/adi/common-sc594-som/sc594-som.c
create mode 100644 board/adi/common-sc598-som/sc598-som.c
create mode 100644 board/adi/sc573-ezkit/Makefile
create mode 100644 board/adi/sc573-ezkit/sc573-ezkit.c
create mode 100644 board/adi/sc584-ezkit/Makefile
create mode 100644 board/adi/sc584-ezkit/sc584-ezkit.c
create mode 100644 board/adi/sc589-ezkit/Makefile
create mode 100644 board/adi/sc589-ezkit/sc589-ezkit.c
create mode 100644 board/adi/sc589-mini/Makefile
create mode 100644 board/adi/sc589-mini/sc589-mini.c
create mode 100644 board/adi/sc594-som-ezkit/Makefile
create mode 100644 board/adi/sc594-som-ezlite/Makefile
create mode 100644 board/adi/sc598-som-ezkit/Makefile
create mode 100644 board/adi/sc598-som-ezlite/Makefile
create mode 100644 configs/sc573-ezkit_defconfig
create mode 100644 configs/sc584-ezkit_defconfig
create mode 100644 configs/sc589-ezkit_defconfig
create mode 100644 configs/sc589-mini_defconfig
create mode 100644 configs/sc594-som-ezkit-spl_defconfig
create mode 100644 configs/sc594-som-ezlite-spl_defconfig
create mode 100644 configs/sc598-som-ezkit-spl_defconfig
create mode 100644 configs/sc598-som-ezlite-spl_defconfig
--
2.49.1
base-commit: 0e0a198a68be71148f5ec27ef86796174f91436f
branch: dev/sc5xx-boards-v3
next reply other threads:[~2025-12-11 8:05 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-11 8:03 Greg Malysa [this message]
2025-12-11 8:03 ` [PATCH 01/12] mach-sc5xx: Introduce Kconfig symbols for image addresses Greg Malysa
2025-12-11 8:03 ` [PATCH 02/12] mach-sc5xx: Rename SC_BOOT_MODE Greg Malysa
2025-12-11 8:03 ` [PATCH 03/12] mach-sc5xx: Kconfig: Make EZKIT and EZLITE carriers mutually exclusive Greg Malysa
2025-12-11 8:03 ` [PATCH 04/12] mach-sc5xx: Add preliminary support for binman Greg Malysa
2025-12-11 8:03 ` [PATCH 05/12] docker: add Analog Devices tools to docker image Greg Malysa
2025-12-11 8:03 ` [PATCH 06/12] board: adi: Add SOMCRR infrastructure Greg Malysa
2025-12-11 8:03 ` [PATCH 07/12] board: adi: Add support for SC573-ezkit Greg Malysa
2025-12-11 8:03 ` [PATCH 08/12] board: adi: Add support for SC589 boards Greg Malysa
2025-12-11 8:04 ` [PATCH 09/12] board: adi: Add support for SC584-ezkit Greg Malysa
2025-12-11 8:04 ` [PATCH 10/12] board: adi: Add support for SC598 Greg Malysa
2025-12-11 8:04 ` [PATCH 11/12] board: adi: Add support for SC594 Greg Malysa
2025-12-11 8:04 ` [PATCH 12/12] MAINTAINERS: Update ADI entries for new boards Greg Malysa
2026-01-23 22:33 ` [PATCH 00/12] sc5xx: Add complete board support for all ADI SC5xx boards Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2025-11-18 6:39 Greg Malysa
2025-11-18 6:44 ` Greg Malysa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251211080414.5363-1-malysagreg@gmail.com \
--to=malysagreg@gmail.com \
--cc=Oliver.Gaskell@analog.com \
--cc=adsp-linux@analog.com \
--cc=alif.zakuan.yuslaimi@altera.com \
--cc=arturs.artamonovs@analog.com \
--cc=caleb.ethridge@analog.com \
--cc=hs@nabladev.com \
--cc=ian.roberts@timesys.com \
--cc=jerome.forissier@linaro.org \
--cc=kory.maincent@bootlin.com \
--cc=marex@denx.de \
--cc=me@ziyao.cc \
--cc=mkorpershoek@kernel.org \
--cc=nathan.morrison@timesys.com \
--cc=peng.fan@nxp.com \
--cc=philip.molloy@analog.com \
--cc=philip@philipmolloy.com \
--cc=raymondmaoca@gmail.com \
--cc=sjg@chromium.org \
--cc=stefan.roese@mailbox.org \
--cc=sumit.garg@kernel.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=utsav.agarwal@analog.com \
--cc=vasileios.bimpikas@analog.com \
--cc=xypron.glpk@gmx.de \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox