[PATCH 09/17] board: k1: initialize clock and serial devices in SPL

[Raymond Mao <raymondmaoca@gmail.com>]

From: Raymond Mao <raymond.mao@riscstar.com>

Initialize clock and serial devices in SPL. Otherwise, the device
driver won't be loaded in SPL.

Signed-off-by: Raymond Mao <raymond.mao@riscstar.com>
---
 board/spacemit/k1/spl.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/board/spacemit/k1/spl.c b/board/spacemit/k1/spl.c
index 11a097389f1..1c299810d39 100644
--- a/board/spacemit/k1/spl.c
+++ b/board/spacemit/k1/spl.c
@@ -3,8 +3,44 @@
  * Copyright (c) 2025-2026, RISCStar Ltd.
  */
 
+#include <dm/device.h>
+#include <dm/uclass.h>
 #include <spl.h>
 
+static void clk_early_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_get_device_by_name(UCLASS_CLK, "clock-controller@d4090000", &dev);
+	if (ret)
+		panic("Fail to detect clock-controller@d4090000\n");
+	ret = uclass_get_device_by_name(UCLASS_CLK, "system-controller@d4050000", &dev);
+	if (ret)
+		panic("Fail to detect system-controller@d4050000\n");
+	ret = uclass_get_device_by_name(UCLASS_CLK, "system-controller@d4282800", &dev);
+	if (ret)
+		panic("Fail to detect system-controller@d4282800\n");
+	ret = uclass_get_device_by_name(UCLASS_CLK, "system-controller@d4015000", &dev);
+	if (ret)
+		panic("Fail to detect system-controller@d4015000\n");
+
+	if (device_active(dev))
+		debug("clk: device is active\n");
+	else
+		debug("clk: device not active, probing...\n");
+}
+
+void serial_early_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_get_device(UCLASS_SERIAL, 0, &dev);
+	if (ret)
+		panic("Serial uclass init failed: %d\n", ret);
+}
+
 void board_init_f(ulong dummy)
 {
 	int ret;
@@ -15,6 +51,8 @@ void board_init_f(ulong dummy)
 
 	riscv_cpu_setup();
 
+	clk_early_init();
+	serial_early_init();
 	preloader_console_init();
 }
 
-- 
2.25.1