From: Francesco Dolcini <francesco@dolcini.it>
To: u-boot@lists.denx.de, Suhaas Joshi <s-joshi@ti.com>,
trini@konsulko.com, vigneshr@ti.com
Cc: n-francis@ti.com, s-tripathi1@ti.com, k-malarvizhi@ti.com,
kamlesh@ti.com, vishalm@ti.com, d.schultz@phytec.de,
w.egorov@phytec.de, ggiordano@phytec.com
Subject: [REGRESSION] Verdin AM62/62P not booting with 42b3ee7fa524
Date: Mon, 9 Feb 2026 09:38:55 +0100 [thread overview]
Message-ID: <20260209083855.GA9367@francesco-nb> (raw)
Verdin AM62 and AM62P are not booting anymore with U-Boot 42b3ee7fa524,
everything was fine with b5213bbfdcb1.
Looking at the commits between the two revision, I would say that the
issue is with this series https://lore.kernel.org/all/20260127081652.506357-1-s-joshi@ti.com/
Suhaas: Can you help?
Failure::
U-Boot SPL 2026.04-rc1-0.0.0-devel+git.42b3ee7fa524 (Feb 08 2026 - 16:14:45 +0000)
SYSFW ABI: 4.0 (firmware rev 0x000b '11.2.5--v11.02.05 (Fancy Rat)')
Failed to set clock rates for '/a53@0': -22
SPL initial stack usage: 13504 bytes
Trying to boot from MMC1
Authentication passed
Authentication passed
Authentication passed
Loading Environment from nowhere... OK
init_env from device 9 not supported!
Authentication passed
Authentication passed
Starting ATF on ARM64 core...
NOTICE: BL31: v2.13.0(release):v2.13.0-259-ge0c4d3903b-dirty
NOTICE: BL31: Built : 07:01:36, Jul 1 2025
U-Boot SPL 2026.04-rc1-0.0.0-devel+git.42b3ee7fa524 (Feb 08 2026 - 16:14:45 +0000)
SYSFW ABI: 4.0 (firmware rev 0x000b '11.2.5--v11.02.05 (Fancy Rat)')
## ... and after that just no logs at all.
Success::
U-Boot SPL 2026.04-rc1-0.0.0-devel+git.b5213bbfdcb1 (Feb 04 2026 - 16:41:48 +0000)
SYSFW ABI: 4.0 (firmware rev 0x000b '11.2.5--v11.02.05 (Fancy Rat)')
Failed to set clock rates for '/a53@0': -61
SPL initial stack usage: 13504 bytes
Trying to boot from MMC1
Authentication passed
Authentication passed
Authentication passed
Loading Environment from nowhere... OK
init_env from device 9 not supported!
Authentication passed
Authentication passed
Starting ATF on ARM64 core...
NOTICE: BL31: v2.13.0(release):v2.13.0-259-ge0c4d3903b-dirty
NOTICE: BL31: Built : 07:01:36, Jul 1 2025
U-Boot SPL 2026.04-rc1-0.0.0-devel+git.b5213bbfdcb1 (Feb 04 2026 - 16:41:48 +0000)
SYSFW ABI: 4.0 (firmware rev 0x000b '11.2.5--v11.02.05 (Fancy Rat)')
SPL initial stack usage: 2048 bytes
Trying to boot from MMC1
Authentication passed
Authentication passed
U-Boot 2026.04-rc1-0.0.0-devel+git.b5213bbfdcb1 (Feb 04 2026 - 16:41:48 +0000)
SoC: AM62X SR1.0 HS-FS
Reset reason: POR
DRAM: 512 MiB
optee optee: OP-TEE: revision 4.7 (a9690ae39995af36)
Core: 160 devices, 35 uclasses, devicetree: separate
MMC: mmc@fa10000: 0, mmc@fa00000: 1
Loading Environment from MMC... Reading from MMC(0)... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Model: Toradex 0071 Verdin AM62 Solo 512MB V1.2A
Serial#: 15412814
Carrier: Toradex Dahlia V1.1D, Serial# 11287147
Thanks,
Francesco
next reply other threads:[~2026-02-09 8:39 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-09 8:38 Francesco Dolcini [this message]
2026-02-09 8:45 ` [REGRESSION] Verdin AM62/62P not booting with 42b3ee7fa524 Francesco Dolcini
2026-02-09 10:08 ` Suhaas Joshi
2026-02-09 10:16 ` Francesco Dolcini
2026-02-09 17:25 ` Francesco Dolcini
2026-02-09 17:43 ` Tom Rini
2026-02-09 18:07 ` Francesco Dolcini
2026-02-09 18:13 ` Tom Rini
2026-02-10 9:26 ` Suhaas Joshi
2026-02-10 10:02 ` Wadim Egorov
2026-02-10 10:22 ` Wadim Egorov
2026-02-10 10:34 ` Francesco Dolcini
2026-02-09 20:20 ` Bryan Brattlof
2026-02-10 10:50 ` Francesco Dolcini
2026-02-11 10:11 ` Francesco Dolcini
2026-02-11 11:21 ` Suhaas Joshi
2026-02-13 10:20 ` Francesco Dolcini
2026-02-17 13:21 ` Suhaas Joshi
2026-02-18 6:59 ` Francesco Dolcini
2026-02-18 14:52 ` Francesco Dolcini
2026-02-19 1:46 ` Bryan Brattlof
2026-02-19 10:30 ` Wadim Egorov
2026-02-19 10:40 ` Suhaas Joshi
2026-02-19 19:30 ` Francesco Dolcini
2026-02-20 1:05 ` Bryan Brattlof
2026-02-20 10:46 ` Francesco Dolcini
2026-02-20 13:23 ` Bryan Brattlof
2026-02-23 15:58 ` Francesco Dolcini
2026-02-24 10:21 ` Francesco Dolcini
2026-02-24 13:53 ` devarsh
2026-02-24 14:38 ` Francesco Dolcini
2026-02-24 15:24 ` Francesco Dolcini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260209083855.GA9367@francesco-nb \
--to=francesco@dolcini.it \
--cc=d.schultz@phytec.de \
--cc=ggiordano@phytec.com \
--cc=k-malarvizhi@ti.com \
--cc=kamlesh@ti.com \
--cc=n-francis@ti.com \
--cc=s-joshi@ti.com \
--cc=s-tripathi1@ti.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
--cc=vishalm@ti.com \
--cc=w.egorov@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox