[PATCH v1] configs: aquila-am69: Set ENV_MMC_EMMC_HW_PARTITION and ENV_RELOC_GD_ENV_ADDR

[Vitor Soares <ivitro@gmail.com>]

From: Vitor Soares <vitor.soares@toradex.com>

Set CONFIG_ENV_MMC_EMMC_HW_PARTITION=1 to store the environment in the
eMMC first hardware boot partition instead of defaulting to 0 (user
data area), where the rootfs and data partitions normally reside,
risking corruption. This keeps the full boot stack self-contained in
the eMMC hardware boot partition.

Enable CONFIG_ENV_RELOC_GD_ENV_ADDR so that gd->env_addr is adjusted by
the relocation offset during U-Boot relocation. Without it, gd->env_addr
keeps pointing to the pre-relocation address of the default
environment, leading to incorrect environment access before env_load()
completes.

Fixes: 3f0528882c0d ("board: toradex: add aquila am69 support")
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
---
 configs/aquila-am69_a72_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/aquila-am69_a72_defconfig b/configs/aquila-am69_a72_defconfig
index 0f85b228b063..6a0ccd15e6db 100644
--- a/configs/aquila-am69_a72_defconfig
+++ b/configs/aquila-am69_a72_defconfig
@@ -80,6 +80,8 @@ CONFIG_SPL_MULTI_DTB_FIT=y
 CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_MMC_EMMC_HW_PARTITION=1
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="eth0"
-- 
2.53.0