[PATCH v1] arm: dts: s5p4418: fix "mmc write failed" e.g. at cmd saveenv

[Stefan Bosch <stefan_b@posteo.net>]

s5p4418-pinctrl.dtsi: Fix mmc bus definitions to fix "mmc write failed"
e.g. when cmd saveenv is executed. Initialize all four GPIO of the
mmc-buses instead of only the first one.

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
---

 arch/arm/dts/s5p4418-pinctrl.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/s5p4418-pinctrl.dtsi b/arch/arm/dts/s5p4418-pinctrl.dtsi
index 0768d80fc95..639b6d2ca6d 100644
--- a/arch/arm/dts/s5p4418-pinctrl.dtsi
+++ b/arch/arm/dts/s5p4418-pinctrl.dtsi
@@ -35,7 +35,7 @@ pinctrl@C0010000 {
 	};
 
 	mmc0_bus4: mmc0-bus-width4 {
-		pins = "gpiob-1, gpiob-3, gpiob-5, gpiob-7";
+		pins = "gpiob-1", "gpiob-3", "gpiob-5", "gpiob-7";
 		pin-function = <1>;
 		pin-pull = <2>;
 		pin-strength = <1>;
@@ -56,7 +56,7 @@ pinctrl@C0010000 {
 	};
 
 	mmc1_bus4: mmc1-bus-width4 {
-		pins = "gpiod-24, gpiod-25, gpiod-26, gpiod-27";
+		pins = "gpiod-24", "gpiod-25", "gpiod-26", "gpiod-27";
 		pin-function = <1>;
 		pin-pull = <2>;
 		pin-strength = <1>;
@@ -77,7 +77,7 @@ pinctrl@C0010000 {
 	};
 
 	mmc2_bus4: mmc2-bus-width4 {
-		pins = "gpioc-20, gpioc-21, gpioc-22, gpioc-23";
+		pins = "gpioc-20", "gpioc-21", "gpioc-22", "gpioc-23";
 		pin-function = <2>;
 		pin-pull = <2>;
 		pin-strength = <1>;
-- 
2.17.1