From: Andre Przywara <andre.przywara@arm.com>
To: u-boot@lists.denx.de
Cc: Tom Rini <trini@konsulko.com>,
Quentin Schulz <quentin.schulz@cherry.de>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Paul Kocialkowski <contact@paulk.fr>,
linux-sunxi@lists.linux.dev
Subject: [PATCH 2/3] sunxi: configs: enable power LEDs on 32-bit boards
Date: Wed, 8 Apr 2026 00:34:46 +0200 [thread overview]
Message-ID: <20260407223447.4956-3-andre.przywara@arm.com> (raw)
In-Reply-To: <20260407223447.4956-1-andre.przywara@arm.com>
We recently gained a simple way to enable a power LED very early in the
SPL boot, through simple Kconfig variables.
Add those symbols to those boards' defconfigs where the DT indicates a
default-on power LED. The number used is <port bank> * 32 + <pin no>,
an active low setup means CONFIG_SPL_SUNXI_LED_STATUS_STATE must be
undefined.
This will light up the power LED very early in the (SPL) boot phase on
those 32-bit boards.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
configs/A13-OLinuXinoM_defconfig | 3 +++
configs/Bananapi_M2_Ultra_defconfig | 3 +++
configs/Bananapi_m2m_defconfig | 3 +++
configs/Mele_A1000G_quad_defconfig | 3 +++
configs/Mele_A1000_defconfig | 3 +++
configs/Mele_M9_defconfig | 3 +++
configs/bananapi_m1_plus_defconfig | 3 +++
configs/bananapi_m2_berry_defconfig | 3 +++
configs/bananapi_m2_zero_defconfig | 3 +++
configs/beelink_x2_defconfig | 3 +++
configs/icnova-a20-adb4006_defconfig | 3 +++
configs/nanopi_duo2_defconfig | 3 +++
configs/nanopi_neo_air_defconfig | 3 +++
configs/orangepi_2_defconfig | 3 +++
configs/orangepi_lite_defconfig | 3 +++
configs/orangepi_one_defconfig | 3 +++
configs/orangepi_pc_defconfig | 3 +++
configs/orangepi_zero_defconfig | 3 +++
configs/orangepi_zero_plus2_h3_defconfig | 3 +++
19 files changed, 57 insertions(+)
diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
index f547635302f..7fbce4b6dd2 100644
--- a/configs/A13-OLinuXinoM_defconfig
+++ b/configs/A13-OLinuXinoM_defconfig
@@ -10,6 +10,9 @@ CONFIG_VIDEO_VGA_VIA_LCD=y
CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
CONFIG_VIDEO_LCD_POWER="PB10"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=201
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x7f
diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig
index 375b0063c1a..6e1b5b8c921 100644
--- a/configs/Bananapi_M2_Ultra_defconfig
+++ b/configs/Bananapi_M2_Ultra_defconfig
@@ -5,6 +5,9 @@ CONFIG_DRAM_CLK=576
CONFIG_SPL=y
CONFIG_MACH_SUN8I_R40=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=244
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
diff --git a/configs/Bananapi_m2m_defconfig b/configs/Bananapi_m2m_defconfig
index 0c20cce49ea..d8f99d0c70e 100644
--- a/configs/Bananapi_m2m_defconfig
+++ b/configs/Bananapi_m2m_defconfig
@@ -7,6 +7,9 @@ CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_ZQ=15291
CONFIG_DRAM_ODT_EN=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=355
+# CONFIG_SPL_SUNXI_LED_STATUS_STATE is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig
index 1f4739e0005..320856bda4e 100644
--- a/configs/Mele_A1000G_quad_defconfig
+++ b/configs/Mele_A1000G_quad_defconfig
@@ -4,6 +4,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad"
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_ZQ=120
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=237
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig
index 93e73ebe3f1..7bfe9afb35c 100644
--- a/configs/Mele_A1000_defconfig
+++ b/configs/Mele_A1000_defconfig
@@ -5,6 +5,9 @@ CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_VIDEO_VGA=y
CONFIG_VIDEO_COMPOSITE=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=244
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig
index 9b1bb97eedd..a3dcbd21f8f 100644
--- a/configs/Mele_M9_defconfig
+++ b/configs/Mele_M9_defconfig
@@ -4,6 +4,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
CONFIG_SPL=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_ZQ=120
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=237
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
diff --git a/configs/bananapi_m1_plus_defconfig b/configs/bananapi_m1_plus_defconfig
index 22b69aa88cb..49dcd679789 100644
--- a/configs/bananapi_m1_plus_defconfig
+++ b/configs/bananapi_m1_plus_defconfig
@@ -6,6 +6,9 @@ CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=249
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig
index b406d519684..3d03b5fc596 100644
--- a/configs/bananapi_m2_berry_defconfig
+++ b/configs/bananapi_m2_berry_defconfig
@@ -4,6 +4,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-v40-bananapi-m2-berry"
CONFIG_DRAM_CLK=576
CONFIG_SPL=y
CONFIG_MACH_SUN8I_R40=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=244
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
diff --git a/configs/bananapi_m2_zero_defconfig b/configs/bananapi_m2_zero_defconfig
index 337bafecd47..fcde63441b5 100644
--- a/configs/bananapi_m2_zero_defconfig
+++ b/configs/bananapi_m2_zero_defconfig
@@ -4,4 +4,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-bananapi-m2-zero"
CONFIG_DRAM_CLK=408
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+# CONFIG_SPL_SUNXI_LED_STATUS_STATE is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
diff --git a/configs/beelink_x2_defconfig b/configs/beelink_x2_defconfig
index 3b0be26f063..1435ebc667d 100644
--- a/configs/beelink_x2_defconfig
+++ b/configs/beelink_x2_defconfig
@@ -5,6 +5,9 @@ CONFIG_DRAM_CLK=567
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/icnova-a20-adb4006_defconfig b/configs/icnova-a20-adb4006_defconfig
index 507e330612e..9aed628d294 100644
--- a/configs/icnova-a20-adb4006_defconfig
+++ b/configs/icnova-a20-adb4006_defconfig
@@ -4,6 +4,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-a20-adb4006"
CONFIG_DRAM_CLK=384
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=245
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
diff --git a/configs/nanopi_duo2_defconfig b/configs/nanopi_duo2_defconfig
index 41b5502d24e..3f59b2f0071 100644
--- a/configs/nanopi_duo2_defconfig
+++ b/configs/nanopi_duo2_defconfig
@@ -5,6 +5,9 @@ CONFIG_DRAM_CLK=408
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
# CONFIG_VIDEO_DE2 is not set
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
index 3b8cbbfcdba..c91a7f79b5e 100644
--- a/configs/nanopi_neo_air_defconfig
+++ b/configs/nanopi_neo_air_defconfig
@@ -5,6 +5,9 @@ CONFIG_DRAM_CLK=408
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
# CONFIG_VIDEO_DE2 is not set
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/orangepi_2_defconfig b/configs/orangepi_2_defconfig
index 88433808538..e12b98161fd 100644
--- a/configs/orangepi_2_defconfig
+++ b/configs/orangepi_2_defconfig
@@ -5,6 +5,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-2"
CONFIG_DRAM_CLK=672
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
diff --git a/configs/orangepi_lite_defconfig b/configs/orangepi_lite_defconfig
index ea1548f0fcd..08a7c516f89 100644
--- a/configs/orangepi_lite_defconfig
+++ b/configs/orangepi_lite_defconfig
@@ -4,6 +4,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-lite"
CONFIG_DRAM_CLK=672
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/orangepi_one_defconfig b/configs/orangepi_one_defconfig
index e4de13de26b..7ee16c2dcb7 100644
--- a/configs/orangepi_one_defconfig
+++ b/configs/orangepi_one_defconfig
@@ -4,6 +4,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-one"
CONFIG_DRAM_CLK=672
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig
index f857d7fa203..12903541a84 100644
--- a/configs/orangepi_pc_defconfig
+++ b/configs/orangepi_pc_defconfig
@@ -4,6 +4,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-pc"
CONFIG_DRAM_CLK=624
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
diff --git a/configs/orangepi_zero_defconfig b/configs/orangepi_zero_defconfig
index e128f5fcdb3..9a11154c9f9 100644
--- a/configs/orangepi_zero_defconfig
+++ b/configs/orangepi_zero_defconfig
@@ -6,6 +6,9 @@ CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
# CONFIG_VIDEO_DE2 is not set
CONFIG_SPL_SPI_SUNXI=y
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
CONFIG_MTD=y
diff --git a/configs/orangepi_zero_plus2_h3_defconfig b/configs/orangepi_zero_plus2_h3_defconfig
index caf515c7026..dd37b1a3fff 100644
--- a/configs/orangepi_zero_plus2_h3_defconfig
+++ b/configs/orangepi_zero_plus2_h3_defconfig
@@ -6,6 +6,9 @@ CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
# CONFIG_DRAM_ODT_EN is not set
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_SPL_SUNXI_LED_STATUS=y
+CONFIG_SPL_SUNXI_LED_STATUS_BIT=362
+CONFIG_SPL_SUNXI_LED_STATUS_STATE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
--
2.46.4
next prev parent reply other threads:[~2026-04-07 22:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-07 22:34 [PATCH 0/3] sunxi: Fix and extend SPL power LED support Andre Przywara
2026-04-07 22:34 ` [PATCH 1/3] sunxi: spl: fix SPL_SUNXI_LED active low configuration Andre Przywara
2026-04-08 8:27 ` Quentin Schulz
2026-04-09 15:56 ` Paul Kocialkowski
2026-04-07 22:34 ` Andre Przywara [this message]
2026-04-07 22:34 ` [PATCH 3/3] sunxi: configs: enable power LEDs on 64-bit boards Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260407223447.4956-3-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=contact@paulk.fr \
--cc=jernej.skrabec@gmail.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=quentin.schulz@cherry.de \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox