From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Cc: "Raymond Mao" <raymondmaoca@gmail.com>,
"Ilias Apalodimas" <ilias.apalodimas@linaro.org>,
"Michal Simek" <michal.simek@amd.com>,
"Christian Pötzsch" <christian.poetzsch@kernkonzept.com>,
"Marek Vasut" <marek.vasut+renesas@mailbox.org>
Subject: Fwd: New Defects reported by Coverity Scan for Das U-Boot
Date: Tue, 28 Apr 2026 08:04:33 -0600 [thread overview]
Message-ID: <20260428140433.GQ41863@bill-the-cat> (raw)
[-- Attachment #1: Type: text/plain, Size: 16974 bytes --]
Here's the latest report.
---------- Forwarded message ---------
From: <scan-admin@coverity.com>
Date: Mon, Apr 27, 2026, 5:41 PM
Subject: New Defects reported by Coverity Scan for Das U-Boot
To: <tom.rini@gmail.com>
Hi,
Please find the latest report on new defect(s) introduced to *Das U-Boot*
found with Coverity Scan.
- *New Defects Found:* 9
- 77 defect(s), reported by Coverity Scan earlier, were marked fixed in
the recent build analyzed by Coverity Scan.
- *Defects Shown:* Showing 9 of 9 defect(s)
Defect Details
** CID 645841: Incorrect expression (BAD_COMPARE)
/common/bloblist.c: 303 in bloblist_apply_blobs()
_____________________________________________________________________________________________
*** CID 645841: Incorrect expression (BAD_COMPARE)
/common/bloblist.c: 303 in bloblist_apply_blobs()
297 log_err("Failed to apply blob with tag %d\n",
298 tag);
299 return ret;
300 }
301
302 rec = rec_from_blob(blob - dat_off);
>>> CID 645841: Incorrect expression (BAD_COMPARE)
>>> Comparing pointer "rec" against "NULL" using anything besides "==" or "!=" is likely to be incorrect.
303 if (rec <= 0) {
304 log_err("Blob corrupted\n");
305 return -ENOENT;
306 }
307
308 /* Mark applied blob record as void */
** CID 645840: Uninitialized variables (UNINIT)
_____________________________________________________________________________________________
*** CID 645840: Uninitialized variables (UNINIT)
/lib/efi_loader/efi_device_path.c: 967 in efi_dp_from_http()
961 if ((server && strlen("http://") + strlen(server) + 1 >
sizeof(tmp)) ||
962 (!server && IS_ENABLED(CONFIG_NET_LWIP)))
963 return NULL;
964
965 efi_net_get_addr(&ip, &mask, NULL, dev);
966
>>> CID 645840: Uninitialized variables (UNINIT)
>>> Using uninitialized value "ip" when calling "efi_dp_from_ipv4".
967 dp1 = efi_dp_from_ipv4(&ip, &mask, NULL, dev);
968 if (!dp1)
969 return NULL;
970
971
972 strcpy(tmp, "http://");
** CID 645839: Error handling issues (CHECKED_RETURN)
/lib/fdtdec.c: 1785 in fdtdec_apply_bloblist_dtos()
_____________________________________________________________________________________________
*** CID 645839: Error handling issues (CHECKED_RETURN)
/lib/fdtdec.c: 1785 in fdtdec_apply_bloblist_dtos()
1779
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
1781 if (ret)
1782 return ret;
1783
1784 /* Shink the blob to the actual FDT size */
>>> CID 645839: Error handling issues (CHECKED_RETURN)
>>> Calling "fdt_pack" without checking return value (as is done elsewhere 5 out of 6 times).
1785 fdt_pack(live_fdt);
1786 return bloblist_resize(BLOBLISTT_CONTROL_FDT,
fdt_totalsize(live_fdt));
1787 }
1788
1789 int fdtdec_setup(void)
1790 {
** CID 645838: Uninitialized variables (UNINIT)
_____________________________________________________________________________________________
*** CID 645838: Uninitialized variables (UNINIT)
/lib/efi_loader/efi_device_path.c: 967 in efi_dp_from_http()
961 if ((server && strlen("http://") + strlen(server) + 1 >
sizeof(tmp)) ||
962 (!server && IS_ENABLED(CONFIG_NET_LWIP)))
963 return NULL;
964
965 efi_net_get_addr(&ip, &mask, NULL, dev);
966
>>> CID 645838: Uninitialized variables (UNINIT)
>>> Using uninitialized value "mask" when calling "efi_dp_from_ipv4".
967 dp1 = efi_dp_from_ipv4(&ip, &mask, NULL, dev);
968 if (!dp1)
969 return NULL;
970
971
972 strcpy(tmp, "http://");
** CID 645837: (TAINTED_SCALAR)
_____________________________________________________________________________________________
*** CID 645837: (TAINTED_SCALAR)
/lib/fdtdec.c: 1775 in fdtdec_apply_bloblist_dtos()
1769 /* Resize if the current space is not sufficient */
1770 if (blob_size < padded_size) {
1771 ret = bloblist_resize(BLOBLISTT_CONTROL_FDT, padded_size);
1772 if (ret)
1773 return ret;
1774
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "live_fdt->size_dt_struct" to "fdt_open_into", which uses it as an offset.
1775 ret = fdt_open_into(live_fdt, live_fdt, padded_size);
1776 if (ret)
1777 return ret;
1778 }
1779
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
/lib/fdtdec.c: 1785 in fdtdec_apply_bloblist_dtos()
1779
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
1781 if (ret)
1782 return ret;
1783
1784 /* Shink the blob to the actual FDT size */
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "live_fdt->size_dt_struct" to "fdt_pack", which uses it as an offset.
1785 fdt_pack(live_fdt);
1786 return bloblist_resize(BLOBLISTT_CONTROL_FDT,
fdt_totalsize(live_fdt));
1787 }
1788
1789 int fdtdec_setup(void)
1790 {
/lib/fdtdec.c: 1775 in fdtdec_apply_bloblist_dtos()
1769 /* Resize if the current space is not sufficient */
1770 if (blob_size < padded_size) {
1771 ret = bloblist_resize(BLOBLISTT_CONTROL_FDT, padded_size);
1772 if (ret)
1773 return ret;
1774
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "live_fdt->totalsize" to "fdt_open_into", which uses it as an offset.
1775 ret = fdt_open_into(live_fdt, live_fdt, padded_size);
1776 if (ret)
1777 return ret;
1778 }
1779
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
/lib/fdtdec.c: 1786 in fdtdec_apply_bloblist_dtos()
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
1781 if (ret)
1782 return ret;
1783
1784 /* Shink the blob to the actual FDT size */
1785 fdt_pack(live_fdt);
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "fdt32_ld(&((struct fdt_header const *)live_fdt)->totalsize)" to "bloblist_resize", which uses it as an offset.
1786 return bloblist_resize(BLOBLISTT_CONTROL_FDT,
fdt_totalsize(live_fdt));
1787 }
1788
1789 int fdtdec_setup(void)
1790 {
1791 int ret = -ENOENT;
/lib/fdtdec.c: 1775 in fdtdec_apply_bloblist_dtos()
1769 /* Resize if the current space is not sufficient */
1770 if (blob_size < padded_size) {
1771 ret = bloblist_resize(BLOBLISTT_CONTROL_FDT, padded_size);
1772 if (ret)
1773 return ret;
1774
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "live_fdt->size_dt_strings" to "fdt_open_into", which uses it as an offset.
1775 ret = fdt_open_into(live_fdt, live_fdt, padded_size);
1776 if (ret)
1777 return ret;
1778 }
1779
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
/lib/fdtdec.c: 1785 in fdtdec_apply_bloblist_dtos()
1779
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
1781 if (ret)
1782 return ret;
1783
1784 /* Shink the blob to the actual FDT size */
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "live_fdt->size_dt_struct" to "fdt_pack", which uses it as an offset.
1785 fdt_pack(live_fdt);
1786 return bloblist_resize(BLOBLISTT_CONTROL_FDT,
fdt_totalsize(live_fdt));
1787 }
1788
1789 int fdtdec_setup(void)
1790 {
/lib/fdtdec.c: 1786 in fdtdec_apply_bloblist_dtos()
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
1781 if (ret)
1782 return ret;
1783
1784 /* Shink the blob to the actual FDT size */
1785 fdt_pack(live_fdt);
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "fdt32_ld(&((struct fdt_header const *)live_fdt)->totalsize)" to "bloblist_resize", which uses it as an offset.
1786 return bloblist_resize(BLOBLISTT_CONTROL_FDT,
fdt_totalsize(live_fdt));
1787 }
1788
1789 int fdtdec_setup(void)
1790 {
1791 int ret = -ENOENT;
/lib/fdtdec.c: 1785 in fdtdec_apply_bloblist_dtos()
1779
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
1781 if (ret)
1782 return ret;
1783
1784 /* Shink the blob to the actual FDT size */
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "live_fdt->size_dt_strings" to "fdt_pack", which uses it as an offset.
1785 fdt_pack(live_fdt);
1786 return bloblist_resize(BLOBLISTT_CONTROL_FDT,
fdt_totalsize(live_fdt));
1787 }
1788
1789 int fdtdec_setup(void)
1790 {
/lib/fdtdec.c: 1786 in fdtdec_apply_bloblist_dtos()
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
1781 if (ret)
1782 return ret;
1783
1784 /* Shink the blob to the actual FDT size */
1785 fdt_pack(live_fdt);
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "fdt32_ld(&((struct fdt_header const *)live_fdt)->totalsize)" to "bloblist_resize", which uses it as an offset.
1786 return bloblist_resize(BLOBLISTT_CONTROL_FDT,
fdt_totalsize(live_fdt));
1787 }
1788
1789 int fdtdec_setup(void)
1790 {
1791 int ret = -ENOENT;
/lib/fdtdec.c: 1786 in fdtdec_apply_bloblist_dtos()
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
1781 if (ret)
1782 return ret;
1783
1784 /* Shink the blob to the actual FDT size */
1785 fdt_pack(live_fdt);
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "fdt32_ld(&((struct fdt_header const *)live_fdt)->totalsize)" to "bloblist_resize", which uses it as an offset.
1786 return bloblist_resize(BLOBLISTT_CONTROL_FDT,
fdt_totalsize(live_fdt));
1787 }
1788
1789 int fdtdec_setup(void)
1790 {
1791 int ret = -ENOENT;
/lib/fdtdec.c: 1786 in fdtdec_apply_bloblist_dtos()
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
1781 if (ret)
1782 return ret;
1783
1784 /* Shink the blob to the actual FDT size */
1785 fdt_pack(live_fdt);
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "fdt32_ld(&((struct fdt_header const *)live_fdt)->totalsize)" to "bloblist_resize", which uses it as an offset.
1786 return bloblist_resize(BLOBLISTT_CONTROL_FDT,
fdt_totalsize(live_fdt));
1787 }
1788
1789 int fdtdec_setup(void)
1790 {
1791 int ret = -ENOENT;
/lib/fdtdec.c: 1785 in fdtdec_apply_bloblist_dtos()
1779
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
1781 if (ret)
1782 return ret;
1783
1784 /* Shink the blob to the actual FDT size */
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "live_fdt->size_dt_struct" to "fdt_pack", which uses it as an offset.
1785 fdt_pack(live_fdt);
1786 return bloblist_resize(BLOBLISTT_CONTROL_FDT,
fdt_totalsize(live_fdt));
1787 }
1788
1789 int fdtdec_setup(void)
1790 {
/lib/fdtdec.c: 1785 in fdtdec_apply_bloblist_dtos()
1779
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
1781 if (ret)
1782 return ret;
1783
1784 /* Shink the blob to the actual FDT size */
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "live_fdt->size_dt_strings" to "fdt_pack", which uses it as an offset.
1785 fdt_pack(live_fdt);
1786 return bloblist_resize(BLOBLISTT_CONTROL_FDT,
fdt_totalsize(live_fdt));
1787 }
1788
1789 int fdtdec_setup(void)
1790 {
/lib/fdtdec.c: 1786 in fdtdec_apply_bloblist_dtos()
1780 ret = bloblist_apply_blobs(BLOBLISTT_FDT_OVERLAY,
fdtdec_apply_dto_blob);
1781 if (ret)
1782 return ret;
1783
1784 /* Shink the blob to the actual FDT size */
1785 fdt_pack(live_fdt);
>>> CID 645837: (TAINTED_SCALAR)
>>> Passing tainted expression "fdt32_ld(&((struct fdt_header const *)live_fdt)->totalsize)" to "bloblist_resize", which uses it as an offset.
1786 return bloblist_resize(BLOBLISTT_CONTROL_FDT,
fdt_totalsize(live_fdt));
1787 }
1788
1789 int fdtdec_setup(void)
1790 {
1791 int ret = -ENOENT;
** CID 645836: Resource leaks (RESOURCE_LEAK)
/drivers/gpio/gpio_scmi.c: 201 in scmi_gpio_probe()
_____________________________________________________________________________________________
*** CID 645836: Resource leaks (RESOURCE_LEAK)
/drivers/gpio/gpio_scmi.c: 201 in scmi_gpio_probe()
195 return -ENOMEM;
196
197 range->base = args.args[0];
198 if (range->base != priv->num_pins) {
199 dev_err(dev, "no gaps allowed in between pins %d vs %d\n",
200 priv->num_pins, range->base);
>>> CID 645836: Resource leaks (RESOURCE_LEAK)
>>> Variable "range" going out of scope leaks the storage it points to.
201 return -EINVAL;
202 }
203 range->offset = args.args[1];
204 range->npins = args.args[2];
205 priv->num_pins += args.args[2];
206 list_add_tail(&range->list, &priv->gpio_ranges);
** CID 645835: Memory - corruptions (OVERRUN)
/lib/gunzip.c: 248 in gzwrite()
_____________________________________________________________________________________________
*** CID 645835: Memory - corruptions (OVERRUN)
/lib/gunzip.c: 248 in gzwrite()
242 s.avail_out = szwritebuf - numfilled;
243 s.next_out = writebuf + numfilled;
244 } else {
245 s.avail_out = szwritebuf;
246 s.next_out = writebuf;
247 }
>>> CID 645835: Memory - corruptions (OVERRUN)
>>> Calling "inflate" with "s.next_in" and "s.avail_in" is suspicious because of the very large index, 4294966272. The index may be due to a negative parameter being interpreted as unsigned. [Note: The source code implementation of the function has been overridden by a builtin model.]
248 r = inflate(&s, Z_SYNC_FLUSH);
249 if ((r != Z_OK) &&
250 (r != Z_STREAM_END)) {
251 printf("Error: inflate() returned %d\n", r);
252 goto out;
253 }
** CID 645834: Control flow issues (NO_EFFECT)
/drivers/virtio/virtio_blk.c: 184 in virtio_blk_do_req()
_____________________________________________________________________________________________
*** CID 645834: Control flow issues (NO_EFFECT)
/drivers/virtio/virtio_blk.c: 184 in virtio_blk_do_req()
178 */
179 while (i < blkcnt) {
180 u32 blk_per_sg = min(blkcnt - i, seg_sec_cnt * priv->seg_max);
181
182 ret = virtio_blk_do_single_req(dev, sector + i, blk_per_sg,
183 buffer + i * 512, type);
>>> CID 645834: Control flow issues (NO_EFFECT)
>>> This less-than-zero comparison of an unsigned value is never true. "ret < 0UL".
184 if (ret < 0)
185 return ret;
186 i += blk_per_sg;
187 }
188
189 return blkcnt >> priv->blksz_shift;
** CID 645833: Control flow issues (DEADCODE)
/drivers/virtio/virtio_blk.c: 185 in virtio_blk_do_req()
_____________________________________________________________________________________________
*** CID 645833: Control flow issues (DEADCODE)
/drivers/virtio/virtio_blk.c: 185 in virtio_blk_do_req()
179 while (i < blkcnt) {
180 u32 blk_per_sg = min(blkcnt - i, seg_sec_cnt * priv->seg_max);
181
182 ret = virtio_blk_do_single_req(dev, sector + i, blk_per_sg,
183 buffer + i * 512, type);
184 if (ret < 0)
>>> CID 645833: Control flow issues (DEADCODE)
>>> Execution cannot reach this statement: "return ret;".
185 return ret;
186 i += blk_per_sg;
187 }
188
189 return blkcnt >> priv->blksz_shift;
190 }
View Defects in Coverity Scan
<https://scan.coverity.com/projects/das-u-boot?tab=overview>
Best regards,
The Coverity Scan Admin Team
----- End forwarded message -----
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next reply other threads:[~2026-04-28 14:04 UTC|newest]
Thread overview: 121+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-28 14:04 Tom Rini [this message]
2026-04-29 6:31 ` Fwd: New Defects reported by Coverity Scan for Das U-Boot Michal Simek
2026-05-01 22:51 ` Raymond Mao
2026-05-01 22:50 ` Raymond Mao
2026-05-12 8:44 ` Fwd: " Christian Pötzsch
2026-05-12 18:38 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2026-08-10 23:14 Tom Rini
2026-07-29 17:07 Tom Rini
2026-07-07 18:58 Tom Rini
2026-06-22 22:43 Tom Rini
2026-06-26 18:28 ` Quentin Schulz
2026-06-26 18:32 ` Dario Binacchi
2026-06-26 21:53 ` Tom Rini
2026-05-11 22:35 Tom Rini
2026-05-08 23:42 Tom Rini
2026-05-14 15:39 ` Lucien.Jheng
2026-04-06 19:12 Tom Rini
2026-03-09 21:23 Tom Rini
2026-03-09 22:05 ` Raphaël Gallais-Pou
2026-03-09 22:13 ` Tom Rini
2026-02-23 19:51 Tom Rini
2026-02-13 22:09 Tom Rini
2026-02-18 23:02 ` Chris Morgan
2026-02-20 16:11 ` Tom Rini
2026-02-20 16:23 ` Chris Morgan
2026-01-16 19:43 Tom Rini
2026-02-09 11:05 ` Guillaume La Roque
2026-02-20 16:11 ` Tom Rini
2026-01-06 20:36 Tom Rini
2026-01-05 23:58 Tom Rini
2026-01-06 9:37 ` Mattijs Korpershoek
2026-01-06 17:15 ` Tom Rini
2026-01-06 10:03 ` Heiko Schocher
2025-12-08 19:38 Tom Rini
2025-11-23 19:03 Tom Rini
2025-11-10 18:55 Tom Rini
2025-10-11 18:06 Tom Rini
2025-10-12 14:22 ` Mikhail Kshevetskiy
2025-10-12 19:07 ` Tom Rini
2025-11-01 6:32 ` Mikhail Kshevetskiy
2025-11-03 15:17 ` Tom Rini
2025-11-03 15:24 ` Michael Nazzareno Trimarchi
2025-08-06 18:35 Tom Rini
2025-08-07 9:17 ` Heiko Schocher
2025-08-08 3:37 ` Maniyam, Dinesh
2025-08-08 4:01 ` Heiko Schocher
2025-07-29 16:32 Tom Rini
2025-07-25 13:26 Tom Rini
2025-07-25 13:34 ` Michal Simek
2025-08-04 9:11 ` Alexander Dahl
2025-07-14 23:29 Tom Rini
2025-07-15 13:45 ` Rasmus Villemoes
2025-07-08 14:10 Tom Rini
2025-04-28 21:59 Tom Rini
2025-04-29 12:07 ` Jerome Forissier
2025-04-30 16:50 ` Marek Vasut
2025-04-30 17:01 ` Tom Rini
2025-04-30 18:23 ` Heinrich Schuchardt
2025-04-30 19:14 ` Tom Rini
2025-03-11 1:49 Tom Rini
2025-02-25 2:39 Tom Rini
2025-02-25 6:06 ` Heiko Schocher
2025-02-25 10:48 ` Quentin Schulz
2025-02-25 10:54 ` Heiko Schocher
2025-02-10 22:26 Tom Rini
2025-02-11 6:14 ` Heiko Schocher
2025-02-11 22:30 ` Tom Rini
2024-12-31 13:55 Tom Rini
2024-12-24 17:14 Tom Rini
2024-11-15 13:27 Tom Rini
2024-11-12 2:11 Tom Rini
2024-10-28 3:11 Tom Rini
2024-10-19 16:16 Tom Rini
2024-10-16 3:47 Tom Rini
2024-10-16 5:56 ` Tudor Ambarus
2024-10-07 17:15 Tom Rini
2024-07-23 14:18 Tom Rini
2024-07-24 9:21 ` Mattijs Korpershoek
2024-07-24 9:45 ` Heinrich Schuchardt
2024-07-24 9:56 ` Mattijs Korpershoek
2024-07-24 10:06 ` Heinrich Schuchardt
2024-07-24 22:40 ` Tom Rini
2024-07-25 8:04 ` Mattijs Korpershoek
2024-07-25 17:16 ` Tom Rini
2024-07-24 9:53 ` Mattijs Korpershoek
2024-04-22 21:48 Tom Rini
2024-01-29 23:55 Tom Rini
2024-01-30 8:14 ` Heinrich Schuchardt
[not found] <20240127154018.GC785631@bill-the-cat>
2024-01-27 20:56 ` Heinrich Schuchardt
2024-01-28 8:51 ` Heinrich Schuchardt
2024-01-22 23:52 Tom Rini
2024-01-22 23:30 Tom Rini
2024-01-23 8:15 ` Hugo Cornelis
[not found] <65a933ab652b3_da12cbd3e77f998728e5@prd-scan-dashboard-0.mail>
2024-01-19 8:47 ` Heinrich Schuchardt
2024-01-18 14:35 Tom Rini
2024-01-08 17:45 Tom Rini
2024-01-09 5:26 ` Sean Anderson
2024-01-09 22:18 ` Tom Rini
2023-08-21 21:09 Tom Rini
2023-08-24 9:27 ` Abdellatif El Khlifi
2023-08-28 16:09 ` Alvaro Fernando García
2023-08-28 16:11 ` Tom Rini
2023-10-20 11:57 ` Abdellatif El Khlifi
2023-10-25 14:57 ` Tom Rini
2023-10-25 15:12 ` Abdellatif El Khlifi
2023-10-25 15:15 ` Tom Rini
2023-10-31 14:21 ` Abdellatif El Khlifi
2023-05-08 20:20 Tom Rini
2023-05-15 21:59 ` Ehsan Mohandesi
2023-05-18 21:04 ` Sean Edmond
2023-02-14 14:26 Tom Rini
2022-11-21 19:43 Tom Rini
2022-11-09 15:40 Tom Rini
[not found] <62df3a0cb9fd2_30ed5f2acd4da7b9a431758@prd-scan-dashboard-0.mail>
2022-07-26 4:22 ` Heinrich Schuchardt
[not found] <611aaf735d268_21438d2b07184e399c79439@prd-scan-dashboard-0.mail>
2021-08-17 5:21 ` Heinrich Schuchardt
2021-08-17 15:17 ` Tom Rini
[not found] <6082f7faa423_5762a2b148d4af9a86820@prd-scan-dashboard-0.mail>
2021-04-24 4:52 ` Heinrich Schuchardt
[not found] <5ecd3c8249d1_d6f562acb748daf5820386@appnode-2.mail>
[not found] ` <CA+M6bX=AmT+SyM0Snt2POLy0-vpD__6CD4j6ifqMqh63yYJBLA@mail.gmail.com>
[not found] ` <8ea1ca2f-2826-58f2-4b6b-ed5cfe977467@gmx.de>
[not found] ` <20200526184027.GJ12717@bill-the-cat>
2020-05-26 20:02 ` Heinrich Schuchardt
2020-05-26 20:10 ` Tom Rini
2020-05-26 20:36 ` Heinrich Schuchardt
2020-05-26 20:48 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260428140433.GQ41863@bill-the-cat \
--to=trini@konsulko.com \
--cc=christian.poetzsch@kernkonzept.com \
--cc=ilias.apalodimas@linaro.org \
--cc=marek.vasut+renesas@mailbox.org \
--cc=michal.simek@amd.com \
--cc=raymondmaoca@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox