[PATCH v2 1/3] cmd: boot: fix edl being shown when not supported

[Quentin Schulz <foss+uboot@0leil.net>]

From: Quentin Schulz <quentin.schulz@cherry.de>

edl is implemented in the sysreset_ops.request_arg callback of the
qcom-psci sysreset driver. That callback is only called from
sysreset_request_arg() which is compiled only when
CONFIG_SYSRESET_CMD_RESET_ARGS=y.

Therefore, only show the edl option if that symbol is enabled.

It is in a separate if block because any option but -w will only be
handled when CONFIG_SYSRESET_CMD_RESET_ARGS=y as seen with the
implementation in do_reset() in drivers/sysreset/sysreset-uclass.c.

Fixes: ef06c5d76ff4 ("cmd: boot: Add '-edl' option to reset command documentation")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
---
 cmd/boot.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/cmd/boot.c b/cmd/boot.c
index d80f9d8c05d..29cdf4a9a81 100644
--- a/cmd/boot.c
+++ b/cmd/boot.c
@@ -60,8 +60,11 @@ U_BOOT_CMD(
 	reset, 2, 0,	do_reset,
 	"Perform RESET of the CPU",
 	"- cold boot without level specifier\n"
+#if IS_ENABLED(CONFIG_SYSRESET_CMD_RESET_ARGS)
+// All options handled by sysreset drivers via their sysreset_ops.request_arg callback
 #ifdef CONFIG_SYSRESET_QCOM_PSCI
 	"reset -edl - Boot to Emergency DownLoad mode\n"
+#endif
 #endif
 	"reset -w - warm reset if implemented"
 );

-- 
2.54.0