From: Raymond Mao <raymondmaoca@gmail.com>
To: u-boot@lists.denx.de
Cc: uboot@riscstar.com, u-boot-spacemit@groups.io,
raymond.mao@riscstar.com, rick@andestech.com,
ycliang@andestech.com, trini@konsulko.com, lukma@denx.de,
hs@nabladev.com, jh80.chung@samsung.com, peng.fan@nxp.com,
xypron.glpk@gmx.de, randolph@andestech.com, dlan@gentoo.org,
junhui.liu@pigmoral.tech, neil.armstrong@linaro.org,
quentin.schulz@cherry.de, samuel@sholland.org,
raymondmaoca@gmail.com, Guodong Xu <guodong@riscstar.com>
Subject: [PATCH 4/8] configs: k1: enable SD and eMMC support
Date: Fri, 12 Jun 2026 16:18:57 -0400 [thread overview]
Message-ID: <20260612201901.73657-5-raymondmaoca@gmail.com> (raw)
In-Reply-To: <20260612201901.73657-1-raymondmaoca@gmail.com>
From: Guodong Xu <guodong@riscstar.com>
Enable high-speed MMC modes for PIO.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Signed-off-by: Raymond Mao <raymond.mao@riscstar.com>
---
board/spacemit/k1/MAINTAINERS | 1 +
configs/spacemit_k1_defconfig | 17 +++++++++++++++++
2 files changed, 18 insertions(+)
diff --git a/board/spacemit/k1/MAINTAINERS b/board/spacemit/k1/MAINTAINERS
index 32d47ecc8f1..ca994e2a1fb 100644
--- a/board/spacemit/k1/MAINTAINERS
+++ b/board/spacemit/k1/MAINTAINERS
@@ -9,6 +9,7 @@ F: configs/spacemit_k1_defconfig
F: doc/board/spacemit/bananapi-f3.rst
F: drivers/gpio/spacemit_gpio.c
F: drivers/i2c/k1_i2c.c
+F: drivers/mmc/spacemit_sdhci.c
F: drivers/pinctrl/spacemit/
F: drivers/power/pmic/pmic_spacemit_p1.c
F: drivers/power/regulator/spacemit_p1_regulator.c
diff --git a/configs/spacemit_k1_defconfig b/configs/spacemit_k1_defconfig
index 81409c844a6..a44e657c0dc 100644
--- a/configs/spacemit_k1_defconfig
+++ b/configs/spacemit_k1_defconfig
@@ -87,6 +87,20 @@ CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_MEM=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x000a0000
CONFIG_CMD_SPI=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SPACEMIT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x4
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMINFO_MAP=y
+CONFIG_EFI_PARTITION=y
CONFIG_SPL_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_SPL_DM_SPI_FLASH=y
@@ -94,3 +108,6 @@ CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_SPI_FLASH_TINY=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_MMC_TINY=y
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
--
2.25.1
next prev parent reply other threads:[~2026-06-12 20:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-12 20:18 [PATCH 0/8] Add SD card and eMMC support for SpacemiT K1 Raymond Mao
2026-06-12 20:18 ` [PATCH 1/8] spacemit: k1: select boot device via config registers Raymond Mao
2026-06-13 3:50 ` Yao Zi
2026-06-12 20:18 ` [PATCH 2/8] mmc: k1: add sdhci platform driver Raymond Mao
2026-06-13 6:43 ` Yao Zi
2026-06-12 20:18 ` [PATCH 3/8] dts: k1: add SD card support in u-boot overlay Raymond Mao
2026-06-12 20:18 ` Raymond Mao [this message]
2026-06-12 20:18 ` [PATCH 5/8] doc: spacemit: flash on K1 SoC based boards Raymond Mao
2026-06-12 20:18 ` [PATCH 6/8] cmd: meminfo: widen memory map addresses to phys_addr_t Raymond Mao
2026-06-12 20:19 ` [PATCH 7/8] cmd: meminfo: fix the lmb info for large DRAM Raymond Mao
2026-06-12 20:19 ` [PATCH 8/8] cmd: tlv_eeprom: fix accessing invalid parameter Raymond Mao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260612201901.73657-5-raymondmaoca@gmail.com \
--to=raymondmaoca@gmail.com \
--cc=dlan@gentoo.org \
--cc=guodong@riscstar.com \
--cc=hs@nabladev.com \
--cc=jh80.chung@samsung.com \
--cc=junhui.liu@pigmoral.tech \
--cc=lukma@denx.de \
--cc=neil.armstrong@linaro.org \
--cc=peng.fan@nxp.com \
--cc=quentin.schulz@cherry.de \
--cc=randolph@andestech.com \
--cc=raymond.mao@riscstar.com \
--cc=rick@andestech.com \
--cc=samuel@sholland.org \
--cc=trini@konsulko.com \
--cc=u-boot-spacemit@groups.io \
--cc=u-boot@lists.denx.de \
--cc=uboot@riscstar.com \
--cc=xypron.glpk@gmx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox