[PATCH v3 02/15] pinctrl: rockchip: Add RV1103B support

[Simon Glass <sjg@chromium.org>]

From: Ye Zhang <ye.zhang@rock-chips.com>

Add the pinctrl driver for the RV1103B.

Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
---

Changes in v3:
- Use regmap_update_bits() in all the remaining places (Jonas)
- Align continuation lines with the open parenthesis (checkpatch)

Changes in v2:
- Use the original author from Rockchip's vendor U-Boot tree
- Use regmap_update_bits()
- Remove unneeded blank lines
- Remove unneeded logging functions

 drivers/pinctrl/rockchip/Makefile          |   1 +
 drivers/pinctrl/rockchip/pinctrl-rv1103b.c | 402 +++++++++++++++++++++
 2 files changed, 403 insertions(+)
 create mode 100644 drivers/pinctrl/rockchip/pinctrl-rv1103b.c

diff --git a/drivers/pinctrl/rockchip/Makefile b/drivers/pinctrl/rockchip/Makefile
index 0405df128df..b7ce6402ea3 100644
--- a/drivers/pinctrl/rockchip/Makefile
+++ b/drivers/pinctrl/rockchip/Makefile
@@ -19,5 +19,6 @@ obj-$(CONFIG_ROCKCHIP_RK3528) += pinctrl-rk3528.o
 obj-$(CONFIG_ROCKCHIP_RK3568) += pinctrl-rk3568.o
 obj-$(CONFIG_ROCKCHIP_RK3576) += pinctrl-rk3576.o
 obj-$(CONFIG_ROCKCHIP_RK3588) += pinctrl-rk3588.o
+obj-$(CONFIG_ROCKCHIP_RV1103B) += pinctrl-rv1103b.o
 obj-$(CONFIG_ROCKCHIP_RV1108) += pinctrl-rv1108.o
 obj-$(CONFIG_ROCKCHIP_RV1126) += pinctrl-rv1126.o
diff --git a/drivers/pinctrl/rockchip/pinctrl-rv1103b.c b/drivers/pinctrl/rockchip/pinctrl-rv1103b.c
new file mode 100644
index 00000000000..4bd74312c8c
--- /dev/null
+++ b/drivers/pinctrl/rockchip/pinctrl-rv1103b.c
@@ -0,0 +1,402 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2024 Rockchip Electronics Co., Ltd
+ */
+
+#include <dm.h>
+#include <log.h>
+#include <dm/pinctrl.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <linux/bitops.h>
+
+#include "pinctrl-rockchip.h"
+
+static int rv1103b_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
+{
+	struct rockchip_pinctrl_priv *priv = bank->priv;
+	int iomux_num = (pin / 8);
+	struct regmap *regmap;
+	u32 data, rmask;
+	int reg, mask;
+	u8 bit;
+
+	if (bank->bank_num == 2 && pin >= 12)
+		return 0;
+
+	regmap = priv->regmap_base;
+	reg = bank->iomux[iomux_num].offset;
+	if ((pin % 8) >= 4)
+		reg += 0x4;
+	bit = (pin % 4) * 4;
+	mask = 0xf;
+
+	if (bank->recalced_mask & BIT(pin))
+		rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
+	data = (mask << (bit + 16));
+	rmask = data | (data >> 16);
+	data |= (mux & mask) << bit;
+
+	return regmap_update_bits(regmap, reg, rmask, data);
+}
+
+#define RV1103_DRV_BITS_PER_PIN		8
+#define RV1103_DRV_PINS_PER_REG		2
+#define RV1103_DRV_GPIO0_A_OFFSET		0x40100
+#define RV1103_DRV_GPIO0_B_OFFSET		0x50110
+#define RV1103_DRV_GPIO1_A01_OFFSET		0x140
+#define RV1103_DRV_GPIO1_A67_OFFSET		0x1014C
+#define RV1103_DRV_GPIO2_OFFSET		0x30180
+#define RV1103_DRV_GPIO2_SARADC_OFFSET		0x3080C
+
+static int rv1103b_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
+					int pin_num, struct regmap **regmap,
+					int *reg, u8 *bit)
+{
+	struct rockchip_pinctrl_priv *priv = bank->priv;
+	int ret = 0;
+
+	*regmap = priv->regmap_base;
+	switch (bank->bank_num) {
+	case 0:
+		if (pin_num < 7)
+			*reg = RV1103_DRV_GPIO0_A_OFFSET;
+		else if (pin_num > 7 && pin_num < 14)
+			*reg = RV1103_DRV_GPIO0_B_OFFSET - 0x10;
+		else
+			ret = -EINVAL;
+		break;
+
+	case 1:
+		if (pin_num < 6)
+			*reg = RV1103_DRV_GPIO1_A01_OFFSET;
+		else if (pin_num >= 6 && pin_num < 23)
+			*reg = RV1103_DRV_GPIO1_A67_OFFSET - 0xc;
+		else if (pin_num >= 24 && pin_num < 30)
+			*reg = RV1103_DRV_GPIO1_A67_OFFSET - 0xc;
+		else
+			ret = -EINVAL;
+		break;
+
+	case 2:
+		if (pin_num < 12) {
+			*reg = RV1103_DRV_GPIO2_OFFSET;
+		} else if (pin_num >= 16) {
+			ret = -EINVAL;
+		} else {
+			*reg = RV1103_DRV_GPIO2_SARADC_OFFSET;
+			*bit = 10;
+
+			return 0;
+		}
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	if (ret) {
+		printf("unsupported bank_num %d pin_num %d\n", bank->bank_num, pin_num);
+		return ret;
+	}
+
+	*reg += ((pin_num / RV1103_DRV_PINS_PER_REG) * 4);
+	*bit = pin_num % RV1103_DRV_PINS_PER_REG;
+	*bit *= RV1103_DRV_BITS_PER_PIN;
+
+	return 0;
+}
+
+static int rv1103b_set_drive(struct rockchip_pin_bank *bank,
+			     int pin_num, int strength)
+{
+	struct regmap *regmap;
+	int reg, ret, i;
+	u32 data, rmask;
+	u8 bit;
+	int rmask_bits = RV1103_DRV_BITS_PER_PIN;
+
+	ret = rv1103b_calc_drv_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
+	if (ret)
+		return ret;
+
+	for (i = 0, ret = 1; i < strength; i++)
+		ret = (ret << 1) | 1;
+
+	if (bank->bank_num == 2 && pin_num >= 12) {
+		rmask_bits = 2;
+		ret = strength;
+	}
+
+	/* Enable the write to the equivalent lower bits */
+	data = ((1 << rmask_bits) - 1) << (bit + 16);
+	rmask = data | (data >> 16);
+	data |= (ret << bit);
+
+	return regmap_update_bits(regmap, reg, rmask, data);
+}
+
+#define RV1103_PULL_BITS_PER_PIN		2
+#define RV1103_PULL_PINS_PER_REG		8
+#define RV1103_PULL_GPIO0_A_OFFSET		0x40200
+#define RV1103_PULL_GPIO0_B_OFFSET		0x50204
+#define RV1103_PULL_GPIO1_A01_OFFSET		0x210
+#define RV1103_PULL_GPIO1_A67_OFFSET		0x10210
+#define RV1103_PULL_GPIO2_OFFSET		0x30220
+#define RV1103_PULL_GPIO2_SARADC_OFFSET	0x3080C
+
+static int rv1103b_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+					 int pin_num, struct regmap **regmap,
+					 int *reg, u8 *bit)
+{
+	struct rockchip_pinctrl_priv *priv = bank->priv;
+	int ret = 0;
+
+	*regmap = priv->regmap_base;
+	switch (bank->bank_num) {
+	case 0:
+		if (pin_num < 7)
+			*reg = RV1103_PULL_GPIO0_A_OFFSET;
+		else if (pin_num > 7 && pin_num < 14)
+			*reg = RV1103_PULL_GPIO0_B_OFFSET - 0x4;
+		else
+			ret = -EINVAL;
+		break;
+
+	case 1:
+		if (pin_num < 6)
+			*reg = RV1103_PULL_GPIO1_A01_OFFSET;
+		else if (pin_num >= 6 && pin_num < 23)
+			*reg = RV1103_PULL_GPIO1_A67_OFFSET;
+		else if (pin_num >= 24 && pin_num < 30)
+			*reg = RV1103_PULL_GPIO1_A67_OFFSET;
+		else
+			ret = -EINVAL;
+		break;
+
+	case 2:
+		if (pin_num < 12) {
+			*reg = RV1103_PULL_GPIO2_OFFSET;
+		} else if (pin_num >= 16) {
+			ret = -EINVAL;
+		} else {
+			*reg = RV1103_PULL_GPIO2_SARADC_OFFSET;
+			*bit = 13;
+
+			return 0;
+		}
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	if (ret) {
+		printf("unsupported bank_num %d pin_num %d\n", bank->bank_num, pin_num);
+		return ret;
+	}
+
+	*reg += ((pin_num / RV1103_PULL_PINS_PER_REG) * 4);
+	*bit = pin_num % RV1103_PULL_PINS_PER_REG;
+	*bit *= RV1103_PULL_BITS_PER_PIN;
+
+	return 0;
+}
+
+static int rv1103b_set_pull(struct rockchip_pin_bank *bank,
+			    int pin_num, int pull)
+{
+	struct regmap *regmap;
+	int reg, ret;
+	u8 bit, type;
+	u32 data, rmask;
+
+	if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
+		return -EINVAL;
+
+	ret = rv1103b_calc_pull_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
+	if (ret)
+		return ret;
+	type = bank->pull_type[pin_num / 8];
+
+	if (bank->bank_num == 2 && pin_num >= 12)
+		type = 1;
+
+	ret = rockchip_translate_pull_value(type, pull);
+	if (ret < 0) {
+		debug("unsupported pull setting %d\n", pull);
+		return ret;
+	}
+
+	/* Enable the write to the equivalent lower bits */
+	data = ((1 << RV1103_PULL_BITS_PER_PIN) - 1) << (bit + 16);
+	rmask = data | (data >> 16);
+	data |= (ret << bit);
+
+	return regmap_update_bits(regmap, reg, rmask, data);
+}
+
+#define RV1103_SMT_BITS_PER_PIN		1
+#define RV1103_SMT_PINS_PER_REG		8
+#define RV1103_SMT_GPIO0_A_OFFSET		0x40400
+#define RV1103_SMT_GPIO0_B_OFFSET		0x50404
+#define RV1103_SMT_GPIO1_A01_OFFSET		0x410
+#define RV1103_SMT_GPIO1_A67_OFFSET		0x10410
+#define RV1103_SMT_GPIO2_OFFSET		0x30420
+#define RV1103_SMT_GPIO2_SARADC_OFFSET		0x3080C
+
+static int rv1103b_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
+					    int pin_num,
+					    struct regmap **regmap,
+					    int *reg, u8 *bit)
+{
+	struct rockchip_pinctrl_priv *priv = bank->priv;
+	int ret = 0;
+
+	*regmap = priv->regmap_base;
+	switch (bank->bank_num) {
+	case 0:
+		if (pin_num < 7)
+			*reg = RV1103_SMT_GPIO0_A_OFFSET;
+		else if (pin_num > 7 && pin_num < 14)
+			*reg = RV1103_SMT_GPIO0_B_OFFSET - 0x4;
+		else
+			ret = -EINVAL;
+		break;
+
+	case 1:
+		if (pin_num < 6)
+			*reg = RV1103_SMT_GPIO1_A01_OFFSET;
+		else if (pin_num >= 6 && pin_num < 23)
+			*reg = RV1103_SMT_GPIO1_A67_OFFSET;
+		else if (pin_num >= 24 && pin_num < 30)
+			*reg = RV1103_SMT_GPIO1_A67_OFFSET;
+		else
+			ret = -EINVAL;
+		break;
+
+	case 2:
+		if (pin_num < 12) {
+			*reg = RV1103_SMT_GPIO2_OFFSET;
+		} else if (pin_num >= 16) {
+			ret = -EINVAL;
+		} else {
+			*reg = RV1103_SMT_GPIO2_SARADC_OFFSET;
+			*bit = 8;
+
+			return 0;
+		}
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	if (ret) {
+		printf("unsupported bank_num %d pin_num %d\n", bank->bank_num, pin_num);
+		return ret;
+	}
+
+	*reg += ((pin_num / RV1103_SMT_PINS_PER_REG) * 4);
+	*bit = pin_num % RV1103_SMT_PINS_PER_REG;
+	*bit *= RV1103_SMT_BITS_PER_PIN;
+
+	return 0;
+}
+
+static int rv1103b_set_schmitt(struct rockchip_pin_bank *bank,
+			       int pin_num, int enable)
+{
+	struct regmap *regmap;
+	int reg, ret;
+	u32 data, rmask, mask;
+	u8 bit;
+
+	ret = rv1103b_calc_schmitt_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
+	if (ret)
+		return ret;
+
+	mask = (1 << RV1103_SMT_BITS_PER_PIN) - 1;
+	if (bank->bank_num == 2 && pin_num >= 12) {
+		mask = 0x3;
+		enable = enable ? 0x3 : 0;
+	}
+
+	/* enable the write to the equivalent lower bits */
+	data = mask << (bit + 16);
+	rmask = data | (data >> 16);
+	data |= (enable << bit);
+
+	return regmap_update_bits(regmap, reg, rmask, data);
+}
+
+static struct rockchip_mux_recalced_data rv1103b_mux_recalced_data[] = {
+	{
+		.num = 1,
+		.pin = 6,
+		.reg = 0x10024,
+		.bit = 8,
+		.mask = 0xf
+	}, {
+		.num = 1,
+		.pin = 7,
+		.reg = 0x10024,
+		.bit = 12,
+		.mask = 0xf
+	},
+};
+
+static struct rockchip_pin_bank rv1103b_pin_banks[] = {
+	PIN_BANK_IOMUX_FLAGS_OFFSET(0, 32, "gpio0",
+				    IOMUX_WIDTH_4BIT,
+				    IOMUX_WIDTH_4BIT,
+				    IOMUX_WIDTH_4BIT,
+				    IOMUX_WIDTH_4BIT,
+				    0x40000, 0x50008, 0x50010, 0x50018),
+	PIN_BANK_IOMUX_FLAGS_OFFSET(1, 32, "gpio1",
+				    IOMUX_WIDTH_4BIT,
+				    IOMUX_WIDTH_4BIT,
+				    IOMUX_WIDTH_4BIT,
+				    IOMUX_WIDTH_4BIT,
+				    0x20, 0x10028, 0x10030, 0x10038),
+	PIN_BANK_IOMUX_FLAGS_OFFSET(2, 32, "gpio2",
+				    IOMUX_WIDTH_4BIT,
+				    IOMUX_WIDTH_4BIT,
+				    IOMUX_WIDTH_4BIT,
+				    IOMUX_WIDTH_4BIT,
+				    0x30040, 0x30048, 0x30050, 0x30058),
+};
+
+static const struct rockchip_pin_ctrl rv1103b_pin_ctrl = {
+	.pin_banks		= rv1103b_pin_banks,
+	.nr_banks		= ARRAY_SIZE(rv1103b_pin_banks),
+	.iomux_recalced		= rv1103b_mux_recalced_data,
+	.niomux_recalced	= ARRAY_SIZE(rv1103b_mux_recalced_data),
+	.set_mux		= rv1103b_set_mux,
+	.set_pull		= rv1103b_set_pull,
+	.set_drive		= rv1103b_set_drive,
+	.set_schmitt		= rv1103b_set_schmitt,
+};
+
+static const struct udevice_id rv1103b_pinctrl_ids[] = {
+	{
+		.compatible = "rockchip,rv1103b-pinctrl",
+		.data = (ulong)&rv1103b_pin_ctrl
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(pinctrl_rv1103b) = {
+	.name		= "rockchip_rv1103b_pinctrl",
+	.id		= UCLASS_PINCTRL,
+	.of_match	= rv1103b_pinctrl_ids,
+	.priv_auto	= sizeof(struct rockchip_pinctrl_priv),
+	.ops		= &rockchip_pinctrl_ops,
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+	.bind		= dm_scan_fdt_dev,
+#endif
+	.probe		= rockchip_pinctrl_probe,
+};
-- 
2.43.0