From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 3424EC44512 for ; Thu, 16 Jul 2026 16:15:21 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id CA80784E2A; Thu, 16 Jul 2026 18:09:19 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="u84Imwi4"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id AC92884CEB; Thu, 16 Jul 2026 15:44:06 +0200 (CEST) Received: from mail-ed1-x529.google.com (mail-ed1-x529.google.com [IPv6:2a00:1450:4864:20::529]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 2160984CC4 for ; Thu, 16 Jul 2026 15:44:04 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=anders.roxell@linaro.org Received: by mail-ed1-x529.google.com with SMTP id 4fb4d7f45d1cf-698a99b1c37so1161923a12.1 for ; Thu, 16 Jul 2026 06:44:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1784209443; x=1784814243; darn=lists.denx.de; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=c+EXThHBKN2Rb5HXKsI1JK0hLP8sijqs94daPmLkS3o=; b=u84Imwi47I9Kb/E4tt4XIAT52oYfbTrbL37gA5x9rCUUML+qeLoR2bT8djVnJ3rMo3 i1dqx74YC0BErFPMUaC+c8XITQ29FriJvI8TIG2pxQJKwWcn3RZlg5Z4i5XYGhPbj0+P NauoNP4uxESUYVFxVd5pEKkS6VcdsuDibgpeAFek427zo5OzdiePdr/9O5C80xJBowP7 qvzx6D6RqrhXf1fmval063O/LkOy9fXuRtd+xRaUUh+qM2R2q+SKa8Ovbk6uLdBw/+Uv daxG1uBI/283fIhT3Xs9NSFrRdRdW2oo7cEld+gSbc0/fcfaQiwTbJ3hpJ658n5WR6iV Hrdg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1784209443; x=1784814243; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to:content-type; bh=c+EXThHBKN2Rb5HXKsI1JK0hLP8sijqs94daPmLkS3o=; b=YUx7nHuhyjL2p5VeNjM+eVDhw9K1FnQyyY3mGBUTMN6ecn/atfgYgHSfDRWj2WawlD N4xldwGMp3g+fc9zR392SOJY0HyRtHVjWuiE1f8FjEw9i8adFMvbCgob4r07s1NGbYCS YU1uN9Wir2OD13cv24AsXAwNTbwQcb2jS4ehwSIiCiZlq+j5bI8wS/4ymyGQbQDmnl31 MvW7zuK42EU+nDHHQIaiQE1n1YdwBqmmzfN3CO9fUMnI4LQfcveDU9dz9j1EH4Waaa/V 6T8KDmY56wIGTnLqQvRH6sfVLhXFPdSbDo9UC4JT0NMTYGIaAPTeM27iMELZtBLXfajE 64uw== X-Gm-Message-State: AOJu0Yyrz7of62mc38zFe+mvqefpqQkPa0IbMaJcvZHcRzYDqsnYs44P d/Dx5mhjAq9Ap4iARz4EQvAJZJYSJlaOrMQNLt8Y6qd2JaqwkPQAsiZWXoG8mVRgY9dk3SsMjf5 kJxJQ X-Gm-Gg: AfdE7cko9EwM35XyusSQjuvL1BuD9S7tQmb2FcBQsqBjlmEp2yN6DrW6jJgF4rI5y95 sRF2WiwgZuaUYr+vM1IKQb04UEBxYbe/mry029kpr9JNtPpoTcio0hWOBQgCxpc0VE3DZFNQtfP I7NJgvPKyh/1GCVGIFvF2dVSr2MdmY/A1Rp8xFubjcRNRX6hmZVhUKZXsvDU5FHgvAdBQ67Uuvw g/W2Q0p3Ba5cmmZWwOjaOSJw5f4nZbhsjPIProT01k5lpyX9gJ/UD9aWdgFgBUoR3pabBPnW82P jlgi0u4uCwYZUKrFJzmVrB+tJPu6ZPHjYhe1ZUsmI7sAZuebUDoRbb97q6k6onfHjz30Qo1AR0C GscKgkAbZ+VmhvVT7iipXknl40Begx5WYpN6UUekNmYgSapO/ft9WJjEMzTZ56TOBYn1smGKV/W eoImFYtPi/eJaLHT79wyYhp4LehGcSkDlGiXRqDg== X-Received: by 2002:a05:6402:440b:b0:698:3ce6:7679 with SMTP id 4fb4d7f45d1cf-69c5f133afbmr7136744a12.8.1784209443322; Thu, 16 Jul 2026 06:44:03 -0700 (PDT) Received: from localhost (c-85-229-7-191.bbcust.telenor.se. [85.229.7.191]) by smtp.gmail.com with ESMTPSA id 4fb4d7f45d1cf-69cd2936143sm4784031a12.25.2026.07.16.06.44.02 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 16 Jul 2026 06:44:02 -0700 (PDT) From: Anders Roxell To: u-boot@lists.denx.de, marex@denx.de Cc: mkorpershoek@kernel.org, ilias.apalodimas@linaro.org, trini@konsulko.com, michal.simek@amd.com, alchark@flipper.net, jerome.forissier@arm.com, Jens Wiklander , Anders Roxell , Lukasz Majewski Subject: [PATCH v5 36/75] usb: dwc3: import from kernel v5.12 Date: Thu, 16 Jul 2026 15:42:06 +0200 Message-ID: <20260716134305.614278-37-anders.roxell@linaro.org> X-Mailer: git-send-email 2.53.0 In-Reply-To: <20260716134305.614278-1-anders.roxell@linaro.org> References: <20260716134305.614278-1-anders.roxell@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Mailman-Approved-At: Thu, 16 Jul 2026 18:09:05 +0200 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean From: Jens Wiklander Sync Linux kernel dwc3 changes from v5.11 to v5.12. The following files are preserved accross the import: Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c dwc3-layerscape.c ti_usb_phy.c Skipping unused files: debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c Note that this is a raw import and doesn't build. A fixup commit at the end of the series fixes that. List of commits: git log --oneline v5.11..v5.12 Commits imported: 5aef629704ad usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable b522f830d351 usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel Merrifield 93f1d43c5767 usb: dwc3: gadget: Use max speed if unspecified cdb651b6021e usb: dwc3: gadget: Set gadget_max_speed when set ssp_rate 5e4010e36a58 usb: dwc3: qcom: skip interconnect init for ACPI probe f09ddcfcb8c5 usb: dwc3: gadget: Prevent EP queuing while stopping transfers 1cffb1c66499 usb: dwc3: qcom: Add missing DWC3 OF node refcount decrement 2664deb09306 usb: dwc3: qcom: Honor wakeup enabled/disabled state 1edbff9c80ed usb: dwc3: qcom: add ACPI device id for sc8180x 83c4a4eec06a of: Remove of_dev_{get,put}() 4b049f55ed95 usb: dwc3: gadget: Fix dep->interval for fullspeed interrupt a1679af85b2a usb: dwc3: gadget: Fix setting of DEPCFG.bInterval_m1 8cf9045b9138 usb: dwc3: gadget: Remove check for bounded driver 450b9e9fabd8 usb: dwc3: gadget: Set speed only up to the max supported f551037c0770 usb: dwc3: gadget: Track connected SSP rate and lane count 072cab8a0fe2 usb: dwc3: gadget: Implement setting of SSP rate 678481467d2e usb: dwc3: core: Check maximum_speed SSP genXxY b1638ee56c1a usb: dwc3: host: Use software node API with the properties 8dc6e6dd1bee usb: dwc3: qcom: Constify the software node efc9812edc61 usb: dwc3: haps: Constify the software node c25c210f590e usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot f08fc2c30e78 usb: dwc3: pci: add support for the Intel Alder Lake-P 73203bde3a95 usb: dwc3: pci: ID for Tiger Lake CPU e492ce9bcaa1 usb: dwc3: pci: Register a software node for the dwc3 platform device 5dc71f1eb870 USB: dwc3: document gadget_max_speed 132ee0da6e9f usb: dwc3: gadget: Disable Vendor Test LMP Received event 0c0a20f6da04 usb: dwc3: Simplify with dev_err_probe() 370e3d5b711d usb: dwc3: keystone: Simplify with dev_err_probe() babbdfc9d229 usb: dwc3: core: Replace devm_reset_control_array_get() 7c9a2598463a usb: dwc3: gadget: Preserve UDC max speed setting 77adb8bdf422 usb: dwc3: gadget: Allow runtime suspend if UDC unbinded 82c46b8ed9dc usb: dwc3: gadget: Introduce a DWC3 VBUS draw callback 6dd2565989b4 usb: dwc3: add imx8mp dwc3 glue layer driver cb4d9b52ec06 usb: dwc3: drd: Improve dwc3_get_extcon() style c824c73a5e08 usb: dwc3: drd: Avoid error when extcon is missing Signed-off-by: Jens Wiklander Signed-off-by: Anders Roxell --- drivers/usb/dwc3/core.c | 83 +++++++----- drivers/usb/dwc3/core.h | 11 ++ drivers/usb/dwc3/gadget.c | 263 ++++++++++++++++++++++++++------------ 3 files changed, 243 insertions(+), 114 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 3101f0dcf6ae..f2448d0a9d39 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1126,11 +1126,8 @@ static int dwc3_core_get_phy(struct dwc3 *dwc) ret = PTR_ERR(dwc->usb2_phy); if (ret == -ENXIO || ret == -ENODEV) { dwc->usb2_phy = NULL; - } else if (ret == -EPROBE_DEFER) { - return ret; } else { - dev_err(dev, "no usb2 phy configured\n"); - return ret; + return dev_err_probe(dev, ret, "no usb2 phy configured\n"); } } @@ -1138,11 +1135,8 @@ static int dwc3_core_get_phy(struct dwc3 *dwc) ret = PTR_ERR(dwc->usb3_phy); if (ret == -ENXIO || ret == -ENODEV) { dwc->usb3_phy = NULL; - } else if (ret == -EPROBE_DEFER) { - return ret; } else { - dev_err(dev, "no usb3 phy configured\n"); - return ret; + return dev_err_probe(dev, ret, "no usb3 phy configured\n"); } } @@ -1151,11 +1145,8 @@ static int dwc3_core_get_phy(struct dwc3 *dwc) ret = PTR_ERR(dwc->usb2_generic_phy); if (ret == -ENOSYS || ret == -ENODEV) { dwc->usb2_generic_phy = NULL; - } else if (ret == -EPROBE_DEFER) { - return ret; } else { - dev_err(dev, "no usb2 phy configured\n"); - return ret; + return dev_err_probe(dev, ret, "no usb2 phy configured\n"); } } @@ -1164,11 +1155,8 @@ static int dwc3_core_get_phy(struct dwc3 *dwc) ret = PTR_ERR(dwc->usb3_generic_phy); if (ret == -ENOSYS || ret == -ENODEV) { dwc->usb3_generic_phy = NULL; - } else if (ret == -EPROBE_DEFER) { - return ret; } else { - dev_err(dev, "no usb3 phy configured\n"); - return ret; + return dev_err_probe(dev, ret, "no usb3 phy configured\n"); } } @@ -1190,11 +1178,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE); ret = dwc3_gadget_init(dwc); - if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to initialize gadget\n"); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "failed to initialize gadget\n"); break; case USB_DR_MODE_HOST: dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); @@ -1205,20 +1190,14 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); ret = dwc3_host_init(dwc); - if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to initialize host\n"); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "failed to initialize host\n"); break; case USB_DR_MODE_OTG: INIT_WORK(&dwc->drd_work, __dwc3_set_mode); ret = dwc3_drd_init(dwc); - if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to initialize dual-role\n"); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "failed to initialize dual-role\n"); break; default: dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode); @@ -1273,6 +1252,7 @@ static void dwc3_get_properties(struct dwc3 *dwc) hird_threshold = 12; dwc->maximum_speed = usb_get_maximum_speed(dev); + dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev); dwc->dr_mode = usb_get_dr_mode(dev); dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node); @@ -1444,6 +1424,42 @@ static void dwc3_check_params(struct dwc3 *dwc) } break; } + + /* + * Currently the controller does not have visibility into the HW + * parameter to determine the maximum number of lanes the HW supports. + * If the number of lanes is not specified in the device property, then + * set the default to support dual-lane for DWC_usb32 and single-lane + * for DWC_usb31 for super-speed-plus. + */ + if (dwc->maximum_speed == USB_SPEED_SUPER_PLUS) { + switch (dwc->max_ssp_rate) { + case USB_SSP_GEN_2x1: + if (hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_GEN1) + dev_warn(dev, "UDC only supports Gen 1\n"); + break; + case USB_SSP_GEN_1x2: + case USB_SSP_GEN_2x2: + if (DWC3_IP_IS(DWC31)) + dev_warn(dev, "UDC only supports single lane\n"); + break; + case USB_SSP_GEN_UNKNOWN: + default: + switch (hwparam_gen) { + case DWC3_GHWPARAMS3_SSPHY_IFC_GEN2: + if (DWC3_IP_IS(DWC32)) + dwc->max_ssp_rate = USB_SSP_GEN_2x2; + else + dwc->max_ssp_rate = USB_SSP_GEN_2x1; + break; + case DWC3_GHWPARAMS3_SSPHY_IFC_GEN1: + if (DWC3_IP_IS(DWC32)) + dwc->max_ssp_rate = USB_SSP_GEN_1x2; + break; + } + break; + } + } } static int dwc3_probe(struct platform_device *pdev) @@ -1490,7 +1506,7 @@ static int dwc3_probe(struct platform_device *pdev) dwc3_get_properties(dwc); - dwc->reset = devm_reset_control_array_get(dev, true, true); + dwc->reset = devm_reset_control_array_get_optional_shared(dev); if (IS_ERR(dwc->reset)) return PTR_ERR(dwc->reset); @@ -1555,8 +1571,7 @@ static int dwc3_probe(struct platform_device *pdev) ret = dwc3_core_init(dwc); if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to initialize core: %d\n", ret); + dev_err_probe(dev, ret, "failed to initialize core\n"); goto err4; } diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 1b241f937d8f..052b20d52651 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -386,6 +386,8 @@ #define DWC3_GUCTL3_SPLITDISABLE BIT(14) /* Device Configuration Register */ +#define DWC3_DCFG_NUMLANES(n) (((n) & 0x3) << 30) /* DWC_usb32 only */ + #define DWC3_DCFG_DEVADDR(addr) ((addr) << 3) #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) @@ -459,6 +461,8 @@ #define DWC3_DEVTEN_USBRSTEN BIT(1) #define DWC3_DEVTEN_DISCONNEVTEN BIT(0) +#define DWC3_DSTS_CONNLANES(n) (((n) >> 30) & 0x3) /* DWC_usb32 only */ + /* Device Status Register */ #define DWC3_DSTS_DCNRD BIT(29) @@ -964,6 +968,10 @@ struct dwc3_scratchpad_array { * @nr_scratch: number of scratch buffers * @u1u2: only used on revisions <1.83a for workaround * @maximum_speed: maximum speed requested (mainly for testing purposes) + * @max_ssp_rate: SuperSpeed Plus maximum signaling rate and lane count + * @gadget_max_speed: maximum gadget speed requested + * @gadget_ssp_rate: Gadget driver's maximum supported SuperSpeed Plus signaling + * rate and lane count. * @ip: controller's ID * @revision: controller's version of an IP * @version_type: VERSIONTYPE register contents, a sub release of a revision @@ -1126,6 +1134,9 @@ struct dwc3 { u32 nr_scratch; u32 u1u2; u32 maximum_speed; + u32 gadget_max_speed; + enum usb_ssp_rate max_ssp_rate; + enum usb_ssp_rate gadget_ssp_rate; u32 ip; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index ee44321fee38..c7ef218e7a8c 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -605,8 +605,23 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action) params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1); if (desc->bInterval) { - params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1); - dep->interval = 1 << (desc->bInterval - 1); + u8 bInterval_m1; + + /* + * Valid range for DEPCFG.bInterval_m1 is from 0 to 13, and it + * must be set to 0 when the controller operates in full-speed. + */ + bInterval_m1 = min_t(u8, desc->bInterval - 1, 13); + if (dwc->gadget->speed == USB_SPEED_FULL) + bInterval_m1 = 0; + + if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT && + dwc->gadget->speed == USB_SPEED_FULL) + dep->interval = desc->bInterval; + else + dep->interval = 1 << (desc->bInterval - 1); + + params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(bInterval_m1); } return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, ¶ms); @@ -768,8 +783,6 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) trace_dwc3_gadget_ep_disable(dep); - dwc3_remove_requests(dwc, dep); - /* make sure HW endpoint isn't stalled */ if (dep->flags & DWC3_EP_STALL) __dwc3_gadget_ep_set_halt(dep, 0, false); @@ -778,16 +791,18 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) reg &= ~DWC3_DALEPENA_EP(dep->number); dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); - dep->stream_capable = false; - dep->type = 0; - dep->flags = 0; - /* Clear out the ep descriptors for non-ep0 */ if (dep->number > 1) { dep->endpoint.comp_desc = NULL; dep->endpoint.desc = NULL; } + dwc3_remove_requests(dwc, dep); + + dep->stream_capable = false; + dep->type = 0; + dep->flags = 0; + return 0; } @@ -1602,7 +1617,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) { struct dwc3 *dwc = dep->dwc; - if (!dep->endpoint.desc || !dwc->pullups_connected) { + if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) { dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n", dep->name); return -ESHUTDOWN; @@ -2038,6 +2053,102 @@ static void dwc3_stop_active_transfers(struct dwc3 *dwc) } } +static void __dwc3_gadget_set_ssp_rate(struct dwc3 *dwc) +{ + enum usb_ssp_rate ssp_rate = dwc->gadget_ssp_rate; + u32 reg; + + if (ssp_rate == USB_SSP_GEN_UNKNOWN) + ssp_rate = dwc->max_ssp_rate; + + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~DWC3_DCFG_SPEED_MASK; + reg &= ~DWC3_DCFG_NUMLANES(~0); + + if (ssp_rate == USB_SSP_GEN_1x2) + reg |= DWC3_DCFG_SUPERSPEED; + else if (dwc->max_ssp_rate != USB_SSP_GEN_1x2) + reg |= DWC3_DCFG_SUPERSPEED_PLUS; + + if (ssp_rate != USB_SSP_GEN_2x1 && + dwc->max_ssp_rate != USB_SSP_GEN_2x1) + reg |= DWC3_DCFG_NUMLANES(1); + + dwc3_writel(dwc->regs, DWC3_DCFG, reg); +} + +static void __dwc3_gadget_set_speed(struct dwc3 *dwc) +{ + enum usb_device_speed speed; + u32 reg; + + speed = dwc->gadget_max_speed; + if (speed == USB_SPEED_UNKNOWN || speed > dwc->maximum_speed) + speed = dwc->maximum_speed; + + if (speed == USB_SPEED_SUPER_PLUS && + DWC3_IP_IS(DWC32)) { + __dwc3_gadget_set_ssp_rate(dwc); + return; + } + + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg &= ~(DWC3_DCFG_SPEED_MASK); + + /* + * WORKAROUND: DWC3 revision < 2.20a have an issue + * which would cause metastability state on Run/Stop + * bit if we try to force the IP to USB2-only mode. + * + * Because of that, we cannot configure the IP to any + * speed other than the SuperSpeed + * + * Refers to: + * + * STAR#9000525659: Clock Domain Crossing on DCTL in + * USB 2.0 Mode + */ + if (DWC3_VER_IS_PRIOR(DWC3, 220A) && + !dwc->dis_metastability_quirk) { + reg |= DWC3_DCFG_SUPERSPEED; + } else { + switch (speed) { + case USB_SPEED_LOW: + reg |= DWC3_DCFG_LOWSPEED; + break; + case USB_SPEED_FULL: + reg |= DWC3_DCFG_FULLSPEED; + break; + case USB_SPEED_HIGH: + reg |= DWC3_DCFG_HIGHSPEED; + break; + case USB_SPEED_SUPER: + reg |= DWC3_DCFG_SUPERSPEED; + break; + case USB_SPEED_SUPER_PLUS: + if (DWC3_IP_IS(DWC3)) + reg |= DWC3_DCFG_SUPERSPEED; + else + reg |= DWC3_DCFG_SUPERSPEED_PLUS; + break; + default: + dev_err(dwc->dev, "invalid speed (%d)\n", speed); + + if (DWC3_IP_IS(DWC3)) + reg |= DWC3_DCFG_SUPERSPEED; + else + reg |= DWC3_DCFG_SUPERSPEED_PLUS; + } + } + + if (DWC3_IP_IS(DWC32) && + speed > USB_SPEED_UNKNOWN && + speed < USB_SPEED_SUPER_PLUS) + reg &= ~DWC3_DCFG_NUMLANES(~0); + + dwc3_writel(dwc->regs, DWC3_DCFG, reg); +} + static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) { u32 reg; @@ -2060,6 +2171,7 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) if (dwc->has_hibernation) reg |= DWC3_DCTL_KEEP_CONNECT; + __dwc3_gadget_set_speed(dwc); dwc->pullups_connected = true; } else { reg &= ~DWC3_DCTL_RUN_STOP; @@ -2110,6 +2222,17 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) } } + /* + * Check the return value for successful resume, or error. For a + * successful resume, the DWC3 runtime PM resume routine will handle + * the run stop sequence, so avoid duplicate operations here. + */ + ret = pm_runtime_get_sync(dwc->dev); + if (!ret || ret < 0) { + pm_runtime_put(dwc->dev); + return 0; + } + /* * Synchronize any pending event handling before executing the controller * halt routine. @@ -2124,6 +2247,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) if (!is_on) { u32 count; + dwc->connected = false; /* * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a * Section 4.1.8 Table 4-7, it states that for a device-initiated @@ -2154,6 +2278,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) ret = dwc3_gadget_run_stop(dwc, is_on, false); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put(dwc->dev); return ret; } @@ -2163,8 +2288,7 @@ static void dwc3_gadget_enable_irq(struct dwc3 *dwc) u32 reg; /* Enable all but Start and End of Frame IRQs */ - reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN | - DWC3_DEVTEN_EVNTOVERFLOWEN | + reg = (DWC3_DEVTEN_EVNTOVERFLOWEN | DWC3_DEVTEN_CMDCMPLTEN | DWC3_DEVTEN_ERRTICERREN | DWC3_DEVTEN_WKUPEVTEN | @@ -2302,7 +2426,7 @@ static int dwc3_gadget_start(struct usb_gadget *g, { struct dwc3 *dwc = gadget_to_dwc(g); unsigned long flags; - int ret = 0; + int ret; int irq; irq = dwc->irq_gadget; @@ -2311,29 +2435,14 @@ static int dwc3_gadget_start(struct usb_gadget *g, if (ret) { dev_err(dwc->dev, "failed to request irq #%d --> %d\n", irq, ret); - goto err0; + return ret; } spin_lock_irqsave(&dwc->lock, flags); - if (dwc->gadget_driver) { - dev_err(dwc->dev, "%s is already bound to %s\n", - dwc->gadget->name, - dwc->gadget_driver->driver.name); - ret = -EBUSY; - goto err1; - } - dwc->gadget_driver = driver; spin_unlock_irqrestore(&dwc->lock, flags); return 0; - -err1: - spin_unlock_irqrestore(&dwc->lock, flags); - free_irq(irq, dwc); - -err0: - return ret; } static void __dwc3_gadget_stop(struct dwc3 *dwc) @@ -2401,62 +2510,34 @@ static void dwc3_gadget_set_speed(struct usb_gadget *g, { struct dwc3 *dwc = gadget_to_dwc(g); unsigned long flags; - u32 reg; spin_lock_irqsave(&dwc->lock, flags); - reg = dwc3_readl(dwc->regs, DWC3_DCFG); - reg &= ~(DWC3_DCFG_SPEED_MASK); - - /* - * WORKAROUND: DWC3 revision < 2.20a have an issue - * which would cause metastability state on Run/Stop - * bit if we try to force the IP to USB2-only mode. - * - * Because of that, we cannot configure the IP to any - * speed other than the SuperSpeed - * - * Refers to: - * - * STAR#9000525659: Clock Domain Crossing on DCTL in - * USB 2.0 Mode - */ - if (DWC3_VER_IS_PRIOR(DWC3, 220A) && - !dwc->dis_metastability_quirk) { - reg |= DWC3_DCFG_SUPERSPEED; - } else { - switch (speed) { - case USB_SPEED_LOW: - reg |= DWC3_DCFG_LOWSPEED; - break; - case USB_SPEED_FULL: - reg |= DWC3_DCFG_FULLSPEED; - break; - case USB_SPEED_HIGH: - reg |= DWC3_DCFG_HIGHSPEED; - break; - case USB_SPEED_SUPER: - reg |= DWC3_DCFG_SUPERSPEED; - break; - case USB_SPEED_SUPER_PLUS: - if (DWC3_IP_IS(DWC3)) - reg |= DWC3_DCFG_SUPERSPEED; - else - reg |= DWC3_DCFG_SUPERSPEED_PLUS; - break; - default: - dev_err(dwc->dev, "invalid speed (%d)\n", speed); + dwc->gadget_max_speed = speed; + spin_unlock_irqrestore(&dwc->lock, flags); +} - if (DWC3_IP_IS(DWC3)) - reg |= DWC3_DCFG_SUPERSPEED; - else - reg |= DWC3_DCFG_SUPERSPEED_PLUS; - } - } - dwc3_writel(dwc->regs, DWC3_DCFG, reg); +static void dwc3_gadget_set_ssp_rate(struct usb_gadget *g, + enum usb_ssp_rate rate) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + unsigned long flags; + spin_lock_irqsave(&dwc->lock, flags); + dwc->gadget_max_speed = USB_SPEED_SUPER_PLUS; + dwc->gadget_ssp_rate = rate; spin_unlock_irqrestore(&dwc->lock, flags); } +static int dwc3_gadget_vbus_draw(struct usb_gadget *g, unsigned int mA) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + + if (dwc->usb2_phy) + return usb_phy_set_power(dwc->usb2_phy, mA); + + return 0; +} + static const struct usb_gadget_ops dwc3_gadget_ops = { .get_frame = dwc3_gadget_get_frame, .wakeup = dwc3_gadget_wakeup, @@ -2465,7 +2546,9 @@ static const struct usb_gadget_ops dwc3_gadget_ops = { .udc_start = dwc3_gadget_start, .udc_stop = dwc3_gadget_stop, .udc_set_speed = dwc3_gadget_set_speed, + .udc_set_ssp_rate = dwc3_gadget_set_ssp_rate, .get_config_params = dwc3_gadget_config_params, + .vbus_draw = dwc3_gadget_vbus_draw, }; /* -------------------------------------------------------------------------- */ @@ -3239,8 +3322,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) { u32 reg; - dwc->connected = true; - /* * WORKAROUND: DWC3 revisions <1.88a have an issue which * would cause a missing Disconnect Event if there's a @@ -3280,6 +3361,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) * transfers." */ dwc3_stop_active_transfers(dwc); + dwc->connected = true; reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_TSTCTRL_MASK; @@ -3298,12 +3380,18 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) struct dwc3_ep *dep; int ret; u32 reg; + u8 lanes = 1; u8 speed; reg = dwc3_readl(dwc->regs, DWC3_DSTS); speed = reg & DWC3_DSTS_CONNECTSPD; dwc->speed = speed; + if (DWC3_IP_IS(DWC32)) + lanes = DWC3_DSTS_CONNLANES(reg) + 1; + + dwc->gadget->ssp_rate = USB_SSP_GEN_UNKNOWN; + /* * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed * each time on Connect Done. @@ -3318,6 +3406,11 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dwc->gadget->ep0->maxpacket = 512; dwc->gadget->speed = USB_SPEED_SUPER_PLUS; + + if (lanes > 1) + dwc->gadget->ssp_rate = USB_SSP_GEN_2x2; + else + dwc->gadget->ssp_rate = USB_SSP_GEN_2x1; break; case DWC3_DSTS_SUPERSPEED: /* @@ -3339,6 +3432,11 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dwc->gadget->ep0->maxpacket = 512; dwc->gadget->speed = USB_SPEED_SUPER; + + if (lanes > 1) { + dwc->gadget->speed = USB_SPEED_SUPER_PLUS; + dwc->gadget->ssp_rate = USB_SSP_GEN_1x2; + } break; case DWC3_DSTS_HIGHSPEED: dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); @@ -3833,6 +3931,7 @@ int dwc3_gadget_init(struct dwc3 *dwc) dev->platform_data = dwc; dwc->gadget->ops = &dwc3_gadget_ops; dwc->gadget->speed = USB_SPEED_UNKNOWN; + dwc->gadget->ssp_rate = USB_SSP_GEN_UNKNOWN; dwc->gadget->sg_supported = true; dwc->gadget->name = "dwc3-gadget"; dwc->gadget->lpm_capable = true; @@ -3859,6 +3958,7 @@ int dwc3_gadget_init(struct dwc3 *dwc) dwc->revision); dwc->gadget->max_speed = dwc->maximum_speed; + dwc->gadget->max_ssp_rate = dwc->max_ssp_rate; /* * REVISIT: Here we should clear all pending IRQs to be @@ -3875,7 +3975,10 @@ int dwc3_gadget_init(struct dwc3 *dwc) goto err5; } - dwc3_gadget_set_speed(dwc->gadget, dwc->maximum_speed); + if (DWC3_IP_IS(DWC32) && dwc->maximum_speed == USB_SPEED_SUPER_PLUS) + dwc3_gadget_set_ssp_rate(dwc->gadget, dwc->max_ssp_rate); + else + dwc3_gadget_set_speed(dwc->gadget, dwc->maximum_speed); return 0; -- 2.53.0