From: Fabio Estevam via U-Boot <u-boot@lists.u-boot-project.org>
To: u-boot@0leil.net
Cc: djw@t-chip.com.cn, sjg@chromium.org, kever.yang@rock-chips.com,
u-boot@lists.u-boot-project.org, trini@konsulko.com,
Fabio Estevam <festevam@nabladev.com>
Subject: [PATCH v2 5/5] rockchip: roc-pc-rk3399: Enable redundant environment
Date: Tue, 21 Jul 2026 22:36:42 -0300 [thread overview]
Message-ID: <20260722013642.1011666-5-festevam@gmail.com> (raw)
In-Reply-To: <20260722013642.1011666-1-festevam@gmail.com>
From: Fabio Estevam <festevam@nabladev.com>
Use the final 64 KiB of the first 4 MiB of SPI NOR for two 32 KiB
U-Boot environment copies. Place the primary copy at 0x3f0000 and
the redundant copy at 0x3f8000.
Both copies are aligned to the 4 KiB erase-sector size and together
occupy 0x3f0000 through 0x3fffff. Redundancy protects the environment
against power loss or an interrupted update.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
---
Changes since v1:
- Improved the commit log.
configs/roc-pc-rk3399_defconfig | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
index 127b71e97917..8ded89c6388b 100644
--- a/configs/roc-pc-rk3399_defconfig
+++ b/configs/roc-pc-rk3399_defconfig
@@ -7,7 +7,7 @@ CONFIG_SPL_I2C=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SF_DEFAULT_SPEED=30000000
CONFIG_ENV_SIZE=0x8000
-CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ENV_OFFSET=0x3F0000
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3399-roc-pc"
CONFIG_OF_LIST="rockchip/rk3399-roc-pc rockchip/rk3399-roc-pc-plus"
@@ -19,6 +19,7 @@ CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_SF_DEFAULT_BUS=1
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_ENV_OFFSET_REDUND=0x3F8000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
@@ -42,6 +43,7 @@ CONFIG_CMD_TIME=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_REDUNDANT=y
CONFIG_ENV_RELOC_GD_ENV_ADDR=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
--
2.43.0
next prev parent reply other threads:[~2026-07-22 1:37 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-22 1:36 [PATCH v2 1/5] mtd: spi-nor-ids: Add XMC XM25QH128C Fabio Estevam via U-Boot
2026-07-22 1:36 ` [PATCH v2 2/5] rockchip: rk3399: Remove ROC-PC regulator overrides Fabio Estevam via U-Boot
2026-07-22 13:53 ` Quentin Schulz via U-Boot
2026-07-22 1:36 ` [PATCH v2 3/5] rockchip: rk3399: Add ROC-PC-PLUS board detection Fabio Estevam via U-Boot
2026-07-22 14:07 ` Quentin Schulz via U-Boot
2026-07-22 1:36 ` [PATCH v2 4/5] rockchip: rk3399: Enable UMS on ROC-PC-PLUS Fabio Estevam via U-Boot
2026-07-22 15:01 ` Quentin Schulz via U-Boot
2026-07-22 1:36 ` Fabio Estevam via U-Boot [this message]
2026-07-22 14:12 ` [PATCH v2 5/5] rockchip: roc-pc-rk3399: Enable redundant environment Quentin Schulz via U-Boot
2026-07-22 10:52 ` [PATCH v2 1/5] mtd: spi-nor-ids: Add XMC XM25QH128C Quentin Schulz via U-Boot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260722013642.1011666-5-festevam@gmail.com \
--to=u-boot@lists.u-boot-project.org \
--cc=djw@t-chip.com.cn \
--cc=festevam@gmail.com \
--cc=festevam@nabladev.com \
--cc=kever.yang@rock-chips.com \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@0leil.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox