[PATCH 1/4] clk: rockchip: rk3568: Always init clocks in SPL build

[Jonas Karlman <jonas@kwiboo.se>]

The ACLK_BUS clock is initialized to 150 MHz in SPL on RK3568.

Ensure clock driver is always probed after bind for SPL builds to
initialize core PLLs and clocks in SPL phase on RK3568.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
 drivers/clk/rockchip/clk_rk3568.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clk/rockchip/clk_rk3568.c b/drivers/clk/rockchip/clk_rk3568.c
index 9f3e9322161e..5a05f1b4de00 100644
--- a/drivers/clk/rockchip/clk_rk3568.c
+++ b/drivers/clk/rockchip/clk_rk3568.c
@@ -2934,6 +2934,10 @@ static int rk3568_clk_bind(struct udevice *dev)
 	struct udevice *sys_child;
 	struct sysreset_reg *priv;
 
+	/* Ensure clocks are initialized after bind in SPL build */
+	if (IS_ENABLED(CONFIG_SPL_BUILD))
+		dev_or_flags(dev, DM_FLAG_PROBE_AFTER_BIND);
+
 	/* The reset driver does not have a device node, so bind it here */
 	ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset",
 				 &sys_child);
-- 
2.54.0