From: Bryan Brattlof <bb@ti.com>
To: Andrew Davis <afd@ti.com>
Cc: <u-boot@lists.u-boot-project.org>, Peng Fan <peng.fan@nxp.com>,
Tom Rini <trini@konsulko.com>,
Dan Carpenter <dan.carpenter@linaro.org>,
Anshul Dalal <anshuld@ti.com>, Simon Glass <sjg@chromium.org>,
Alper Nebi Yasak <alpernebiyasak@gmail.com>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
Aristo Chen <aristo.chen@canonical.com>,
Udit Kumar <u-kumar1@ti.com>,
"Daniel Golle" <daniel@makrotopia.org>,
Johan Jonker <jbx6244@gmail.com>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
Paresh Bhagat <p-bhagat@ti.com>, Swamil Jain <s-jain1@ti.com>,
Neha Malcom Francis <n-francis@ti.com>,
Shiva Tripathi <s-tripathi1@ti.com>,
Apurva Nandan <a-nandan@ti.com>, Chintan Vankar <c-vankar@ti.com>,
Francesco Dolcini <francesco.dolcini@toradex.com>,
"Marek Vasut" <marek.vasut+renesas@mailbox.org>,
Siddharth Vadapalli <s-vadapalli@ti.com>,
Hrushikesh Salunke <h-salunke@ti.com>,
Manorit Chawdhry <m-chawdhry@ti.com>
Subject: Re: [PATCH v3 10/11] doc: board: ti: correct path to tcl scripts
Date: Tue, 4 Aug 2026 14:08:22 -0500 [thread overview]
Message-ID: <20260804190822.75opogfv25ugtpky@bryanbrattlof.com> (raw)
In-Reply-To: <032b1ec4-9175-496c-b3b4-f46e06bd3065@ti.com>
On August 4, 2026 thus sayeth Andrew Davis:
> On 8/3/26 7:09 PM, Bryan Brattlof wrote:
> > OpenOCD has moved where it has placed the tcl scripts for TI's reference
> > boards. Update their paths to the new locations.
> >
> > Tested-by: Anshul Dalal <anshuld@ti.com>
> > Signed-off-by: Bryan Brattlof <bb@ti.com>
> > ---
> > Changes in v3:
> > - Kept warning about which versions of OpenOCD have the tcl scripts
> > - Link to v2: https://lore.kernel.org/r/20260721-am62lx-v2-0-33ff580c267d@ti.com
> > ---
> > doc/board/ti/am6254atl_sk.rst | 2 +-
> > doc/board/ti/am62ax_sk.rst | 2 +-
> > doc/board/ti/am62dx_evm.rst | 11 ++++++-----
> > doc/board/ti/am62px_sk.rst | 12 +++++-------
> > doc/board/ti/am62x_sk.rst | 2 +-
> > doc/board/ti/am64x_evm.rst | 24 ++++++++++++++++++++++++
> > doc/board/ti/am65x_evm.rst | 2 +-
> > doc/board/ti/j7200_evm.rst | 2 +-
> > doc/board/ti/j721e_evm.rst | 2 +-
> > doc/board/ti/j722s_evm.rst | 2 +-
> > doc/board/ti/j784s4_evm.rst | 2 +-
> > 11 files changed, 43 insertions(+), 20 deletions(-)
> >
> > diff --git a/doc/board/ti/am6254atl_sk.rst b/doc/board/ti/am6254atl_sk.rst
> > index 18a3520b39c7..0df058aee157 100644
> > --- a/doc/board/ti/am6254atl_sk.rst
> > +++ b/doc/board/ti/am6254atl_sk.rst
> > @@ -305,4 +305,4 @@ To start OpenOCD and connect to the board
> > .. prompt:: bash $
> > - openocd -f board/ti_am625evm.cfg
> > + openocd -f board/ti/am625evm.cfg
> > diff --git a/doc/board/ti/am62ax_sk.rst b/doc/board/ti/am62ax_sk.rst
> > index 3453ed339e7f..b04bfc991ea0 100644
> > --- a/doc/board/ti/am62ax_sk.rst
> > +++ b/doc/board/ti/am62ax_sk.rst
> > @@ -435,4 +435,4 @@ To start OpenOCD and connect to the board
> > .. prompt:: bash
> > - openocd -f board/ti_am62a7evm.cfg
> > + openocd -f board/ti/am62a7evm.cfg
> > diff --git a/doc/board/ti/am62dx_evm.rst b/doc/board/ti/am62dx_evm.rst
> > index 0d12e3ec1476..88071b3e69d9 100644
> > --- a/doc/board/ti/am62dx_evm.rst
> > +++ b/doc/board/ti/am62dx_evm.rst
> > @@ -237,10 +237,6 @@ detailed setup information.
> > .. warning::
> > - **AM62A**: OpenOCD support since August 2023 (git master)
> > -
> > - **AM62D**: Uses AM62A configuration (compatible due to same core architecture)
> > -
> > Until the next stable release of OpenOCD is available in your development
> > environment's distribution, it might be necessary to build OpenOCD `from the
> > source <https://github.com/openocd-org/openocd>`_.
> > @@ -253,4 +249,9 @@ To start OpenOCD and connect to the board
> > .. prompt:: bash
> > - openocd -f board/ti/am62a7evm.cfg
> > + openocd -f board/ti/am62a7evm.cfg
> > +
> > +.. note::
> > +
> > + The AM62D-EVM uses the same tcl configuration as the AM62A-SK due to
> > + same core architecture.
> > diff --git a/doc/board/ti/am62px_sk.rst b/doc/board/ti/am62px_sk.rst
> > index 44dae4afc870..9d8b5ebf38fb 100644
> > --- a/doc/board/ti/am62px_sk.rst
> > +++ b/doc/board/ti/am62px_sk.rst
> > @@ -331,13 +331,11 @@ detailed setup information.
> > .. warning::
> > - **OpenOCD support after**: v0.12.0
> > + **OpenOCD support after**: v0.12.0
> > - While support for the entire K3 generation including the am62xxx
> > - extended family was added before v0.12.0, the tcl scripts for the
> > - am62px have been accepted and will be available in the next release of
> > - OpenOCD. It may be necessary to build OpenOCD from source depending on
> > - the version your distribution has packaged.
> > + Until the next stable release of OpenOCD is available in your development
> > + environment's distribution, it might be necissary to build OpenOCD `from the
>
> s/necissary/necessary
>
Nice
> Otherwise everything else looks good,
>
> Acked-by: Andrew Davis <afd@ti.com>
~Bryan
next prev parent reply other threads:[~2026-08-04 19:08 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-04 0:09 [PATCH v3 00/11] arm: mach-k3: introduce basic support for the AM62L Bryan Brattlof
2026-08-04 0:09 ` [PATCH v3 01/11] firmware: scmi: switch to dev_ofnode during bind Bryan Brattlof
2026-08-04 0:09 ` [PATCH v3 02/11] tools: binman: extend ti_secure_rom to handle op-tee Bryan Brattlof
2026-08-04 0:09 ` [PATCH v3 03/11] soc: add data to identify the am62lx Bryan Brattlof
2026-08-04 0:09 ` [PATCH v3 04/11] boot/Kconfig: disable fit post processing for AM62L Bryan Brattlof
2026-08-04 0:09 ` [PATCH v3 05/11] arm: mach-k3: Add initial am62lx SoC support Bryan Brattlof
2026-08-04 11:12 ` Anshul Dalal
2026-08-04 0:09 ` [PATCH v3 06/11] board: ti: am62lx: add initial board files Bryan Brattlof
2026-08-04 11:14 ` Anshul Dalal
2026-08-04 0:09 ` [PATCH v3 07/11] arm: dts: k3-am62lx: Add binman support Bryan Brattlof
2026-08-04 11:20 ` Anshul Dalal
2026-08-04 0:09 ` [PATCH v3 08/11] configs: am62lx_evm: add initial defconfig Bryan Brattlof
2026-08-04 11:56 ` Anshul Dalal
2026-08-04 19:10 ` Bryan Brattlof
2026-08-04 0:09 ` [PATCH v3 09/11] doc: ti: k3: fix pygments warning parsing device-tree Bryan Brattlof
2026-08-04 0:09 ` [PATCH v3 10/11] doc: board: ti: correct path to tcl scripts Bryan Brattlof
2026-08-04 11:57 ` Anshul Dalal
2026-08-04 14:49 ` Andrew Davis
2026-08-04 19:08 ` Bryan Brattlof [this message]
2026-08-04 0:09 ` [PATCH v3 11/11] doc: board: ti: am62lx_evm: add initial docs for the AM62L-EVM Bryan Brattlof
2026-08-04 11:29 ` Anshul Dalal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260804190822.75opogfv25ugtpky@bryanbrattlof.com \
--to=bb@ti.com \
--cc=a-nandan@ti.com \
--cc=afd@ti.com \
--cc=alpernebiyasak@gmail.com \
--cc=anshuld@ti.com \
--cc=aristo.chen@canonical.com \
--cc=c-vankar@ti.com \
--cc=dan.carpenter@linaro.org \
--cc=daniel@makrotopia.org \
--cc=francesco.dolcini@toradex.com \
--cc=h-salunke@ti.com \
--cc=ilias.apalodimas@linaro.org \
--cc=jbx6244@gmail.com \
--cc=m-chawdhry@ti.com \
--cc=marek.vasut+renesas@mailbox.org \
--cc=n-francis@ti.com \
--cc=p-bhagat@ti.com \
--cc=peng.fan@nxp.com \
--cc=s-jain1@ti.com \
--cc=s-tripathi1@ti.com \
--cc=s-vadapalli@ti.com \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.u-boot-project.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox