From: Anders Roxell <anders.roxell@linaro.org>
To: u-boot@lists.u-boot-project.org
Cc: marek.vasut@mailbox.org, trini@konsulko.com,
ilias.apalodimas@linaro.org, michal.simek@amd.com, lukma@denx.de,
alchark@flipper.net, jerome.forissier@arm.com,
dlechner@baylibre.com, anshuld@ti.com, sjg@chromium.org,
Anders Roxell <anders.roxell@linaro.org>,
Mattijs Korpershoek <mkorpershoek@kernel.org>
Subject: [PATCH v7 12/24] usb: gadget: ci_udc: set endpoint capabilities
Date: Mon, 24 Aug 2026 17:41:21 +0200 [thread overview]
Message-ID: <20260824154133.217744-13-anders.roxell@linaro.org> (raw)
In-Reply-To: <20260824154133.217744-1-anders.roxell@linaro.org>
The resynced epautoconf.c matches endpoints on the caps field, not on the
name. ci_udc never fills caps in, so usb_ep_autoconfig() finds no endpoint
after the resync.
ci_udc keeps its endpoints in a static table, so set caps and
maxpacket_limit there instead of calling usb_ep_set_maxpacket_limit().
The names say what each endpoint is: ep1in-bulk, ep2out-bulk and
ep3in-int are fixed type and direction. Entry 4 is the template for
ep4 and up, those are free, so let them take any type and direction.
Tested on an i.MX93 board with ums.
Suggested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/u-boot/87v7az6l03.fsf@kernel.org/
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
---
drivers/usb/gadget/ci_udc.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/usb/gadget/ci_udc.c b/drivers/usb/gadget/ci_udc.c
index 87194601f67a..69616b16b052 100644
--- a/drivers/usb/gadget/ci_udc.c
+++ b/drivers/usb/gadget/ci_udc.c
@@ -121,28 +121,57 @@ __weak void ci_init_after_reset(struct ehci_ctrl *ctrl)
static const struct usb_ep ci_ep_init[5] = {
[0] = { /* EP 0 */
.maxpacket = 64,
+ .maxpacket_limit = 64,
.name = "ep0",
.ops = &ci_ep_ops,
+ .caps = {
+ .type_control = 1,
+ .dir_in = 1,
+ .dir_out = 1,
+ },
},
[1] = {
.maxpacket = 512,
+ .maxpacket_limit = 512,
.name = "ep1in-bulk",
.ops = &ci_ep_ops,
+ .caps = {
+ .type_bulk = 1,
+ .dir_in = 1,
+ },
},
[2] = {
.maxpacket = 512,
+ .maxpacket_limit = 512,
.name = "ep2out-bulk",
.ops = &ci_ep_ops,
+ .caps = {
+ .type_bulk = 1,
+ .dir_out = 1,
+ },
},
[3] = {
.maxpacket = 512,
+ .maxpacket_limit = 512,
.name = "ep3in-int",
.ops = &ci_ep_ops,
+ .caps = {
+ .type_int = 1,
+ .dir_in = 1,
+ },
},
[4] = {
.maxpacket = 512,
+ .maxpacket_limit = 512,
.name = "ep-",
.ops = &ci_ep_ops,
+ .caps = {
+ .type_iso = 1,
+ .type_bulk = 1,
+ .type_int = 1,
+ .dir_in = 1,
+ .dir_out = 1,
+ },
},
};
--
2.53.0
next prev parent reply other threads:[~2026-08-24 16:47 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-24 15:41 [PATCH v7 00/24] usb: dwc3: part 2, make the resynced code work Anders Roxell
2026-08-24 15:41 ` [PATCH v7 01/24] dm: add helpers needed by the resynced DWC3 code Anders Roxell
2026-09-11 12:16 ` Mattijs Korpershoek
2026-08-24 15:41 ` [PATCH v7 02/24] usb: phy: add the usb_phy " Anders Roxell
2026-09-11 12:17 ` Mattijs Korpershoek
2026-08-24 15:41 ` [PATCH v7 03/24] usb: gadget: adapt the gadget API after the resync Anders Roxell
2026-08-24 15:41 ` [PATCH v7 04/24] usb: gadget: udc: make udc-core build in u-boot Anders Roxell
2026-08-24 15:41 ` [PATCH v7 05/24] usb: dwc3: make the core driver " Anders Roxell
2026-08-24 15:41 ` [PATCH v7 06/24] usb: dwc3: bring back the samsung usb phy driver Anders Roxell
2026-08-24 15:41 ` [PATCH v7 07/24] usb: dwc3: make gadget and ep0 build in u-boot Anders Roxell
2026-08-24 15:41 ` [PATCH v7 08/24] usb: gadget: udc: enable async callbacks on bind Anders Roxell
2026-08-24 15:41 ` [PATCH v7 09/24] usb: dwc3: ep0: flush and invalidate cache around ep0 transfers Anders Roxell
2026-08-24 15:41 ` [PATCH v7 10/24] usb: dwc3: make the am62 glue build in u-boot Anders Roxell
2026-08-24 15:41 ` [PATCH v7 11/24] usb: gadget: ci_udc: move to the udc-core registration Anders Roxell
2026-08-24 15:41 ` Anders Roxell [this message]
2026-08-24 15:41 ` [PATCH v7 13/24] usb: gadget: dwc2_udc_otg: fix up after the resync Anders Roxell
2026-08-24 15:41 ` [PATCH v7 14/24] usb: gadget: fix up the function drivers " Anders Roxell
2026-08-24 15:41 ` [PATCH v7 15/24] usb: gadget: fix up the last UDC " Anders Roxell
2026-08-24 15:41 ` [PATCH v7 16/24] usb: gadget: atmel_usba_udc: set endpoint capabilities Anders Roxell
2026-08-24 15:41 ` [PATCH v7 17/24] usb: gadget: at91_udc: register with udc-core Anders Roxell
2026-08-24 15:41 ` [PATCH v7 18/24] usb: gadget: at91_udc: set endpoint capabilities Anders Roxell
2026-08-24 15:41 ` [PATCH v7 19/24] usb: musb-new: fix up after the resync Anders Roxell
2026-08-24 15:41 ` [PATCH v7 20/24] usb: musb-new: set endpoint capabilities Anders Roxell
2026-08-24 15:41 ` [PATCH v7 21/24] usb: mtu3: fix up after the resync Anders Roxell
2026-08-24 15:41 ` [PATCH v7 22/24] usb: mtu3: set endpoint capabilities Anders Roxell
2026-08-24 15:41 ` [PATCH v7 23/24] usb: host: xhci: fix up after the resync Anders Roxell
2026-08-24 15:41 ` [PATCH v7 24/24] usb: cdns3: " Anders Roxell
2026-08-25 9:42 ` [PATCH v7 00/24] usb: dwc3: part 2, make the resynced code work Anshul Dalal
2026-08-26 8:29 ` Anders Roxell
2026-08-27 7:48 ` Anshul Dalal
2026-08-28 12:26 ` Anders Roxell
2026-09-11 10:33 ` Love Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260824154133.217744-13-anders.roxell@linaro.org \
--to=anders.roxell@linaro.org \
--cc=alchark@flipper.net \
--cc=anshuld@ti.com \
--cc=dlechner@baylibre.com \
--cc=ilias.apalodimas@linaro.org \
--cc=jerome.forissier@arm.com \
--cc=lukma@denx.de \
--cc=marek.vasut@mailbox.org \
--cc=michal.simek@amd.com \
--cc=mkorpershoek@kernel.org \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.u-boot-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox