From: Mehmet Fide <mehmet.fide@gmail.com>
To: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Peng Fan <peng.fan@nxp.com>, Vincent Jardin <vjardin@free.fr>,
Ye Li <ye.li@nxp.com>, Michal Simek <michal.simek@amd.com>,
Aristo Chen <aristo.chen@canonical.com>,
u-boot@lists.u-boot-project.org,
Mehmet Fide <mehmet.fide@screeningeagle.com>
Subject: [PATCH v2 4/4] test: dm: check the regulators claim their GPIOs at probe time
Date: Fri, 11 Sep 2026 00:08:18 +0200 [thread overview]
Message-ID: <20260910220818.3093364-5-mehmet.fide@gmail.com> (raw)
In-Reply-To: <20260910220818.3093364-1-mehmet.fide@gmail.com>
From: Mehmet Fide <mehmet.fide@screeningeagle.com>
Give sandbox a fixed regulator with an enable GPIO and a gpio regulator
with a voltage GPIO and check the two phases explicitly: after
of_to_plat() the pin is unclaimed in the GPIO name table and its
simulated direction is still the input default; only probe() requests
it and turns it into an output; enabling the regulator, or switching
its voltage, then moves the pin.
The pins come from the pinmux-gpios bank, whose two cells also carry
the flags the way a real regulator node does; the base-gpios bank has
no offset left that the other tests or its hogs do not use. The gpio
regulator driver was not built for sandbox before.
Signed-off-by: Mehmet Fide <mehmet.fide@screeningeagle.com>
---
Notes:
Changes in v2:
- move the regulator to c8 in the pinmux-gpios bank, a10 is a hog pin
(Simon Glass)
- name the node fixed-gpio-reg instead of the compatible (Simon Glass)
- add a gpio regulator on c9 and a test for it, enable
CONFIG_DM_REGULATOR_GPIO in the sandbox defconfigs (Simon Glass)
- check the simulated pad direction, not only the name table (Simon Glass)
arch/sandbox/dts/test.dts | 18 ++++++++++
configs/sandbox64_defconfig | 1 +
configs/sandbox_defconfig | 1 +
configs/sandbox_flattree_defconfig | 1 +
configs/sandbox_noinst_defconfig | 1 +
configs/sandbox_spl_defconfig | 1 +
configs/sandbox_vpl_defconfig | 1 +
test/dm/regulator.c | 58 ++++++++++++++++++++++++++++++
8 files changed, 82 insertions(+)
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index a5d8d3977a0..b05f4c24c3a 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -883,6 +883,24 @@
compatible = "sandbox,fpga";
};
+ fixed_gpio_reg: fixed-gpio-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-gpio-enabled";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio_c 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_reg: gpio-reg {
+ compatible = "regulator-gpio";
+ regulator-name = "gpio-switched";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio_c 9 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0>, <3300000 1>;
+ };
+
pinctrl-gpio {
compatible = "sandbox,pinctrl-gpio";
diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig
index 070ef0b6369..59e08d03f77 100644
--- a/configs/sandbox64_defconfig
+++ b/configs/sandbox64_defconfig
@@ -220,6 +220,7 @@ CONFIG_DM_REGULATOR=y
CONFIG_REGULATOR_ACT8846=y
CONFIG_DM_REGULATOR_MAX77686=y
CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_DM_REGULATOR_SANDBOX=y
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index c6edd9d2423..5ebbe5ca8f6 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -308,6 +308,7 @@ CONFIG_DM_REGULATOR=y
CONFIG_REGULATOR_ACT8846=y
CONFIG_DM_REGULATOR_MAX77686=y
CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_DM_REGULATOR_SANDBOX=y
diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig
index 9546fbf730f..57f915d4ba9 100644
--- a/configs/sandbox_flattree_defconfig
+++ b/configs/sandbox_flattree_defconfig
@@ -175,6 +175,7 @@ CONFIG_DM_REGULATOR=y
CONFIG_REGULATOR_ACT8846=y
CONFIG_DM_REGULATOR_MAX77686=y
CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_DM_REGULATOR_SANDBOX=y
CONFIG_REGULATOR_TPS65090=y
diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig
index 0708b65ea80..7a755012795 100644
--- a/configs/sandbox_noinst_defconfig
+++ b/configs/sandbox_noinst_defconfig
@@ -219,6 +219,7 @@ CONFIG_DM_REGULATOR=y
CONFIG_REGULATOR_ACT8846=y
CONFIG_DM_REGULATOR_MAX77686=y
CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_DM_REGULATOR_SANDBOX=y
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index 11f16f5d622..60b497f4888 100644
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -186,6 +186,7 @@ CONFIG_DM_REGULATOR=y
CONFIG_REGULATOR_ACT8846=y
CONFIG_DM_REGULATOR_MAX77686=y
CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_DM_REGULATOR_SANDBOX=y
diff --git a/configs/sandbox_vpl_defconfig b/configs/sandbox_vpl_defconfig
index c7df8571663..c85bfbfb3b1 100644
--- a/configs/sandbox_vpl_defconfig
+++ b/configs/sandbox_vpl_defconfig
@@ -193,6 +193,7 @@ CONFIG_DM_REGULATOR=y
CONFIG_REGULATOR_ACT8846=y
CONFIG_DM_REGULATOR_MAX77686=y
CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_DM_REGULATOR_SANDBOX=y
diff --git a/test/dm/regulator.c b/test/dm/regulator.c
index 51007d4079d..123cee6f499 100644
--- a/test/dm/regulator.c
+++ b/test/dm/regulator.c
@@ -12,6 +12,7 @@
#include <log.h>
#include <malloc.h>
#include <dm/device-internal.h>
+#include <asm/gpio.h>
#include <dm/root.h>
#include <dm/util.h>
#include <dm/test.h>
@@ -195,6 +196,63 @@ static int dm_test_power_regulator_set_get_current(struct unit_test_state *uts)
}
DM_TEST(dm_test_power_regulator_set_get_current, UTF_SCAN_FDT);
+/* Reading the platform data must leave the pin untouched, probe claims it */
+static int check_gpio_claimed_in_probe(struct unit_test_state *uts,
+ struct udevice *dev, struct gpio_desc *chk)
+{
+ ut_assertok(device_of_to_plat(dev));
+ ut_asserteq(GPIOF_UNUSED, gpio_get_function(chk->dev, chk->offset,
+ NULL));
+ ut_asserteq(0, sandbox_gpio_get_direction(chk->dev, chk->offset));
+
+ ut_assertok(device_probe(dev));
+ ut_asserteq(GPIOF_OUTPUT, gpio_get_function(chk->dev, chk->offset,
+ NULL));
+ ut_assert(sandbox_gpio_get_direction(chk->dev, chk->offset) > 0);
+
+ return 0;
+}
+
+/* The fixed regulator must claim its enable GPIO in probe, not before */
+static int dm_test_power_regulator_fixed_enable_gpio(struct unit_test_state *uts)
+{
+ struct gpio_desc chk;
+ struct udevice *dev;
+
+ ut_assertok(uclass_find_device_by_name(UCLASS_REGULATOR,
+ "fixed-gpio-reg", &dev));
+ ut_assertok(dm_gpio_lookup_name("c8", &chk));
+ ut_assertok(check_gpio_claimed_in_probe(uts, dev, &chk));
+
+ ut_assertok(regulator_set_enable(dev, true));
+ ut_asserteq(1, sandbox_gpio_get_value(chk.dev, chk.offset));
+ ut_assertok(regulator_set_enable(dev, false));
+ ut_asserteq(0, sandbox_gpio_get_value(chk.dev, chk.offset));
+
+ return 0;
+}
+DM_TEST(dm_test_power_regulator_fixed_enable_gpio, UTF_SCAN_FDT);
+
+/* The gpio regulator must claim its voltage GPIO in probe, not before */
+static int dm_test_power_regulator_gpio_value_gpio(struct unit_test_state *uts)
+{
+ struct gpio_desc chk;
+ struct udevice *dev;
+
+ ut_assertok(uclass_find_device_by_name(UCLASS_REGULATOR, "gpio-reg",
+ &dev));
+ ut_assertok(dm_gpio_lookup_name("c9", &chk));
+ ut_assertok(check_gpio_claimed_in_probe(uts, dev, &chk));
+
+ ut_assertok(regulator_set_value(dev, 3300000));
+ ut_asserteq(1, sandbox_gpio_get_value(chk.dev, chk.offset));
+ ut_assertok(regulator_set_value(dev, 1800000));
+ ut_asserteq(0, sandbox_gpio_get_value(chk.dev, chk.offset));
+
+ return 0;
+}
+DM_TEST(dm_test_power_regulator_gpio_value_gpio, UTF_SCAN_FDT);
+
/* Test regulator set and get Enable method */
static int dm_test_power_regulator_set_get_enable(struct unit_test_state *uts)
{
--
2.55.0
prev parent reply other threads:[~2026-09-10 22:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 22:08 [PATCH v2 0/4] dm: gpio: read GPIOs in of_to_plat(), request them in probe() Mehmet Fide
2026-09-10 22:08 ` [PATCH v2 1/4] gpio: add a way to parse a GPIO now and request it later Mehmet Fide
2026-09-10 22:08 ` [PATCH v2 2/4] regulator: claim the enable GPIO at probe time, not in of_to_plat() Mehmet Fide
2026-09-10 22:08 ` [PATCH v2 3/4] doc: driver-model: state that of_to_plat() must not probe or claim Mehmet Fide
2026-09-10 22:08 ` Mehmet Fide [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260910220818.3093364-5-mehmet.fide@gmail.com \
--to=mehmet.fide@gmail.com \
--cc=aristo.chen@canonical.com \
--cc=jh80.chung@samsung.com \
--cc=mehmet.fide@screeningeagle.com \
--cc=michal.simek@amd.com \
--cc=peng.fan@nxp.com \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.u-boot-project.org \
--cc=vjardin@free.fr \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox