From: Biswapriyo Nath <nathbappai@gmail.com>
To: Reza Kurniawan <imkyufie@gmail.com>
Cc: Biswapriyo Nath <nathbappai@gmail.com>,
u-boot-qcom@groups.io, u-boot@lists.u-boot-project.org,
Sumit Garg <sumit.garg@kernel.org>, Tom Rini <trini@konsulko.com>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
Casey Connolly <casey.connolly@linaro.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Balaji Selvanathan <balaji.selvanathan@oss.qualcomm.com>,
Lukasz Majewski <lukma@denx.de>,
Alexey Minnekhanov <alexeymin@minlexx.ru>,
Luca Weiss <luca.weiss@fairphone.com>
Subject: Re: [PATCH v3 0/3] Add preliminary support for MSM8917
Date: Mon, 12 Oct 2026 19:01:45 +0000 [thread overview]
Message-ID: <20261012190147.99117-1-nathbappai@gmail.com> (raw)
In-Reply-To: <20260916-msm8917-support-v3-0-35103cb4e01e@gmail.com>
On Wed, 16 Sep 2026 04:16:01 +0000 Reza Kurniawan <imkyufie@gmail.com> wrote:
> This patch series adds preliminary support for booting Qualcomm MSM8917.
>
> Specifically, it includes carving out reserved memory regions (no-map) at
> early init to avoid security violations, A Global Clock Controller (GCC)
> driver providing essential clocks, resets, and GDSCs needed for U-Boot and
> a pinctrl driver to configure pin parameters and manage GPIOs.
>
> This patch series depends on the GDSC flags series by Luca Weiss and
> Alexey Minnekhanov [1], specifically patch 4/4 ("clk/qcom: Treat different
> GDSCs differently") [2]. On MSM8917, MDSS_GDSC does not have POLL_CFG_GDSCR
> and requires polling the GDSCR register directly instead of CFG_GDSCR,
> which is addressed by [2].
>
> Changes in v3:
> - Drop "clk: qcom: Add an option to poll for GDSCR GDSC_POWER_ON bit"
> in favor of Alexey Minnekhanov's series [1] / [2].
> - Update MDSS_GDSC in clock-msm8917 to comply with the new 'flags'
> member in struct qcom_power_map introduced by [2].
>
> Changes in v2:
> - Change license to GPL-2.0-only
> - Mention the source of the ported code
> - Add error check for out-of-range pin selector
> - Use macros for RCGR address constants
>
> v2: https://lore.kernel.org/u-boot/20260912072619.244101-2-imkyufie@gmail.com
> v1: https://lore.kernel.org/u-boot/20260910095339.110427-1-imkyufie@gmail.com
>
> 1: https://lore.kernel.org/u-boot/20260715-gdsc-flags-v2-0-27704470a24c@fairphone.com
> 2: https://lore.kernel.org/u-boot/20260715-gdsc-flags-v2-4-27704470a24c@fairphone.com
>
> ---
> Reza Kurniawan (3):
> mach-snapdragon: Carve out reserved memory at init for MSM8917
> clk: qcom: Add Global Clock Controller (GCC) driver for MSM8917
> pinctrl: qcom: Add pinctrl driver for MSM8917
>
> arch/arm/mach-snapdragon/mem_map.c | 3 +-
> configs/qcom_defconfig | 1 +
> drivers/clk/qcom/Kconfig | 8 +
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/clock-msm8917.c | 210 +++++++++++
> drivers/pinctrl/qcom/Kconfig | 8 +
> drivers/pinctrl/qcom/Makefile | 1 +
> drivers/pinctrl/qcom/pinctrl-msm8917.c | 645 +++++++++++++++++++++++++++++++++
> 8 files changed, 876 insertions(+), 1 deletion(-)
> ---
> base-commit: d27c992cebb95bd903d09f3d1da55032a7a145da
> change-id: 20260915-msm8917-support-e56f0d21881b
> prerequisite-message-id: <20260715-gdsc-flags-v2-0-27704470a24c@fairphone.com>
> prerequisite-patch-id: a1b270485786a326cb40fda882935fcc0fbf3bba
> prerequisite-patch-id: 1d4a1450016d914394cf6a7e24ec9e5bc12fe80a
> prerequisite-patch-id: 568826d73bd992c6ff16681ad33e6891e25af5f5
> prerequisite-patch-id: bad5df259c02085a5aa51d130459ae1eecd0f638
>
> Best regards,
> --
> Reza Kurniawan <imkyufie@gmail.com>
>
>
I have tested all the patches with msm8937 Xiaomi Redmi 3S (land) phone.
U-Boot can boot Linux and fastboot, USB serial console, SD card work too.
Tested-by: Biswapriyo Nath <nathbappai@gmail.com>
Thanks <3
prev parent reply other threads:[~2026-10-12 19:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-16 4:16 [PATCH v3 0/3] Add preliminary support for MSM8917 Reza Kurniawan
2026-09-16 4:16 ` [PATCH v3 1/3] mach-snapdragon: Carve out reserved memory at init " Reza Kurniawan
2026-09-16 4:16 ` [PATCH v3 2/3] clk: qcom: Add Global Clock Controller (GCC) driver " Reza Kurniawan
2026-09-16 4:16 ` [PATCH v3 3/3] pinctrl: qcom: Add pinctrl " Reza Kurniawan
2026-10-12 19:01 ` Biswapriyo Nath [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261012190147.99117-1-nathbappai@gmail.com \
--to=nathbappai@gmail.com \
--cc=alexeymin@minlexx.ru \
--cc=balaji.selvanathan@oss.qualcomm.com \
--cc=casey.connolly@linaro.org \
--cc=ilias.apalodimas@linaro.org \
--cc=imkyufie@gmail.com \
--cc=luca.weiss@fairphone.com \
--cc=lukma@denx.de \
--cc=neil.armstrong@linaro.org \
--cc=sumit.garg@kernel.org \
--cc=trini@konsulko.com \
--cc=u-boot-qcom@groups.io \
--cc=u-boot@lists.u-boot-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox