[U-Boot] [PATCH 1/2] sunxi: add proper device tree for iNet D978 rev2 boards

[Icenowy Zheng <icenowy@aosc.xyz>]

26.08.2016, 20:23, "Hans de Goede" <hdegoede@redhat.com>:
> Hi,
>
> On 26-08-16 14:03, Icenowy Zheng wrote:
>> ?Add a proper dts for the iNet D978 rev2 based A33 tablets.
>
> Hmm, this dts file is not using the new sun8i-reference-design-tablet.dtsi
> file. IIRC your kernel submission was using that ?
>
> Currently u-boot does not have that file yet, but I've a patch
> adding it in my sunxi-wip:
> https://github.com/jwrdegoede/u-boot-sunxi/commits/sunxi-wip
>
> Please resend this series once the dts file has been accepted
> in the kernel and send the exact same file as used in the kernel.

Can I firstly send a defconfig which uses sun8i-a33-q8-tablet.dtb?
At least it just works.

>
> You can use my sunxi-wip branch for now / until the dts-sync
> which adds sun8i-reference-design-tablet.dtsi gets merged
> in u-boot/master (which should happen soon).
>
> Regards,
>
> Hans
>
>> ?Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
>> ?---
>> ??arch/arm/dts/Makefile | 1 +
>> ??arch/arm/dts/sun8i-a33-inet-d978-rev2.dts | 139 ++++++++++++++++++++++++++++++
>> ??2 files changed, 140 insertions(+)
>> ??create mode 100644 arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
>>
>> ?diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> ?index 223124e..d2749da 100644
>> ?--- a/arch/arm/dts/Makefile
>> ?+++ b/arch/arm/dts/Makefile
>> ?@@ -239,6 +239,7 @@ dtb-$(CONFIG_MACH_SUN8I_A23) += \
>> ??????????sun8i-a23-q8-tablet.dtb
>> ??dtb-$(CONFIG_MACH_SUN8I_A33) += \
>> ??????????sun8i-a33-ga10h-v1.1.dtb \
>> ?+ sun8i-a33-inet-d978-rev2.dtb \
>> ??????????sun8i-a33-q8-tablet.dtb \
>> ??????????sun8i-a33-sinlinx-sina33.dtb \
>> ??????????sun8i-r16-parrot.dtb
>> ?diff --git a/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
>> ?new file mode 100644
>> ?index 0000000..0a3ac91
>> ?--- /dev/null
>> ?+++ b/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
>> ?@@ -0,0 +1,139 @@
>> ?+/*
>> ?+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
>> ?+ * Copyright 2015 Icenowy Zheng <icenowy@aosc.xyz>
>> ?+ *
>> ?+ * This file is dual-licensed: you can use it either under the terms
>> ?+ * of the GPL or the X11 license, at your option. Note that this dual
>> ?+ * licensing only applies to this file, and not this project as a
>> ?+ * whole.
>> ?+ *
>> ?+ * a) This file is free software; you can redistribute it and/or
>> ?+ * modify it under the terms of the GNU General Public License as
>> ?+ * published by the Free Software Foundation; either version 2 of the
>> ?+ * License, or (at your option) any later version.
>> ?+ *
>> ?+ * This file is distributed in the hope that it will be useful,
>> ?+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> ?+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> ?+ * GNU General Public License for more details.
>> ?+ *
>> ?+ * Or, alternatively,
>> ?+ *
>> ?+ * b) Permission is hereby granted, free of charge, to any person
>> ?+ * obtaining a copy of this software and associated documentation
>> ?+ * files (the "Software"), to deal in the Software without
>> ?+ * restriction, including without limitation the rights to use,
>> ?+ * copy, modify, merge, publish, distribute, sublicense, and/or
>> ?+ * sell copies of the Software, and to permit persons to whom the
>> ?+ * Software is furnished to do so, subject to the following
>> ?+ * conditions:
>> ?+ *
>> ?+ * The above copyright notice and this permission notice shall be
>> ?+ * included in all copies or substantial portions of the Software.
>> ?+ *
>> ?+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> ?+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> ?+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> ?+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> ?+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> ?+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> ?+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> ?+ * OTHER DEALINGS IN THE SOFTWARE.
>> ?+ */
>> ?+
>> ?+/dts-v1/;
>> ?+#include "sun8i-a33.dtsi"
>> ?+#include "sunxi-common-regulators.dtsi"
>> ?+
>> ?+#include <dt-bindings/gpio/gpio.h>
>> ?+#include <dt-bindings/input/input.h>
>> ?+#include <dt-bindings/pinctrl/sun4i-a10.h>
>> ?+
>> ?+/ {
>> ?+ model = "Allwinner GA10H Quad Core Tablet (v1.1)";
>> ?+ compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33";
>> ?+
>> ?+ aliases {
>> ?+ serial0 = &r_uart;
>> ?+ };
>> ?+
>> ?+ chosen {
>> ?+ stdout-path = "serial0:115200n8";
>> ?+ };
>> ?+};
>> ?+
>> ?+&i2c0 {
>> ?+ pinctrl-names = "default";
>> ?+ pinctrl-0 = <&i2c0_pins_a>;
>> ?+ status = "okay";
>> ?+};
>> ?+
>> ?+&i2c1 {
>> ?+ pinctrl-names = "default";
>> ?+ pinctrl-0 = <&i2c1_pins_a>;
>> ?+ status = "okay";
>> ?+};
>> ?+
>> ?+&lradc {
>> ?+ vref-supply = <&reg_vcc3v0>;
>> ?+ status = "okay";
>> ?+
>> ?+ button at 200 {
>> ?+ label = "Volume Up";
>> ?+ linux,code = <KEY_VOLUMEUP>;
>> ?+ channel = <0>;
>> ?+ voltage = <200000>;
>> ?+ };
>> ?+
>> ?+ button at 400 {
>> ?+ label = "Volume Down";
>> ?+ linux,code = <KEY_VOLUMEDOWN>;
>> ?+ channel = <0>;
>> ?+ voltage = <400000>;
>> ?+ };
>> ?+
>> ?+ button at 600 {
>> ?+ label = "Back";
>> ?+ linux,code = <KEY_BACK>;
>> ?+ channel = <0>;
>> ?+ voltage = <600000>;
>> ?+ };
>> ?+};
>> ?+
>> ?+&mmc0 {
>> ?+ pinctrl-names = "default";
>> ?+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
>> ?+ vmmc-supply = <&reg_vcc3v0>;
>> ?+ bus-width = <4>;
>> ?+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
>> ?+ cd-inverted;
>> ?+ status = "okay";
>> ?+};
>> ?+
>> ?+&ohci0 {
>> ?+ status = "okay";
>> ?+};
>> ?+
>> ?+&pio {
>> ?+ mmc0_cd_pin_q8h: mmc0_cd_pin at 0 {
>> ?+ allwinner,pins = "PB4";
>> ?+ allwinner,function = "gpio_in";
>> ?+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> ?+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
>> ?+ };
>> ?+};
>> ?+
>> ?+&r_uart {
>> ?+ pinctrl-names = "default";
>> ?+ pinctrl-0 = <&r_uart_pins_a>;
>> ?+ status = "okay";
>> ?+};
>> ?+
>> ?+&usb_otg {
>> ?+ dr_mode = "host";
>> ?+ status = "okay";
>> ?+};
>> ?+
>> ?+&usbphy {
>> ?+ status = "okay";
>> ?+};