public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Francis Laniel <francis.laniel@amarulasolutions.com>
To: Simon Glass <sjg@chromium.org>
Cc: U-Boot Mailing List <u-boot@lists.denx.de>,
	Marek Behun <marek.behun@nic.cz>,
	Michael Nazzareno Trimarchi <michael@amarulasolutions.com>,
	Wolfgang Denk <wd@denx.de>, Harald Seiler <hws@denx.de>
Subject: Re: [RFC PATCH v1 04/21] test: hush: Test hush variable expansion.
Date: Sun, 06 Feb 2022 19:22:47 +0100	[thread overview]
Message-ID: <2095969.irdbgypaU6@pwmachine> (raw)
In-Reply-To: <CAPnjgZ3shX5_R4L42bytZbD0Y_YRS+zNzjiFE8RD-iU1ECuYqA@mail.gmail.com>

Hi.


First, sorry for the delayed answer and thank you a lot for all your reviews!

Le samedi 8 janvier 2022, 15:53:49 CET Simon Glass a écrit :
> Hi Francis,
> 
> On Fri, 31 Dec 2021 at 09:14, Francis Laniel
> 
> <francis.laniel@amarulasolutions.com> wrote:
> > This commit ensures shell variables are replaced by their values.
> > 
> > Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
> > ---
> > 
> >  test/hush/Makefile |   1 +
> >  test/hush/dollar.c | 191 +++++++++++++++++++++++++++++++++++++++++++++
> >  2 files changed, 192 insertions(+)
> >  create mode 100644 test/hush/dollar.c
> > 
> > diff --git a/test/hush/Makefile b/test/hush/Makefile
> > index a3c9ae5106..feb4f71956 100644
> > --- a/test/hush/Makefile
> > +++ b/test/hush/Makefile
> > @@ -5,3 +5,4 @@
> > 
> >  obj-y += cmd_ut_hush.o
> >  obj-y += if.o
> > 
> > +obj-y += dollar.o
> > diff --git a/test/hush/dollar.c b/test/hush/dollar.c
> > new file mode 100644
> > index 0000000000..9313d145d6
> > --- /dev/null
> > +++ b/test/hush/dollar.c
> > @@ -0,0 +1,191 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * (C) Copyright 2021
> > + * Francis Laniel, Amarula Solutions, francis.laniel@amarulasolutions.com
> > + */
> > +
> > +#include <common.h>
> > +#include <command.h>
> > +#include <env_attr.h>
> > +#include <test/hush.h>
> > +#include <test/ut.h>
> > +
> > +static int hush_test_simple_dollar(struct unit_test_state *uts)
> > +{
> > +       console_record_reset_enable();
> > +       ut_assertok(run_command("echo $dollar_foo", 0));
> > +#pragma GCC diagnostic push
> > +#pragma GCC diagnostic ignored "-Wformat-zero-length"
> > +       /*
> > +        * Next line is empty as $dollar_foo was not set before, but
> > compiler +        * complains about the format being empty, so we disable
> > this warning +        * only for this line.
> > +        */
> > +       ut_assert_nextline("");
> > +#pragma GCC diagnostic pop
> 
> You might be able to dp:
> 
> ut_assert_nextline("%s", "");

Thank you for the trick! With this I was able to get rid of this bad warning 
canceling.

> 
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command("echo ${dollar_foo}", 0));
> > +#pragma GCC diagnostic push
> > +#pragma GCC diagnostic ignored "-Wformat-zero-length"
> > +       /*
> > +        * Next line is empty as $dollar_foo was not set before, but
> > compiler +        * complains about the format being empty, so we disable
> > this warning +        * only for this line.
> > +        */
> > +       ut_assert_nextline("");
> > +#pragma GCC diagnostic pop
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command("dollar_foo=bar", 0));
> > +
> > +       ut_assertok(run_command("echo $dollar_foo", 0));
> > +       ut_assert_nextline("bar");
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command("echo ${dollar_foo}", 0));
> > +       ut_assert_nextline("bar");
> > +       ut_assert_console_end();
> > +
> > +       /*
> > +        * R is way of giving raw string literals in C++.
> > +        * It means a "\n" is a R string literal will not be interpreted
> > as line +        * feed but printed as "\n".
> > +        * GCC provides it for C as an extension.
> > +        */
> > +       ut_assertok(run_command(R"(dollar_foo=\$bar)", 0));
> > +
> > +       ut_assertok(run_command("echo $dollar_foo", 0));
> > +       ut_assert_nextline("$bar");
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command("dollar_foo='$bar'", 0));
> > +
> > +       ut_assertok(run_command("echo $dollar_foo", 0));
> > +       ut_assert_nextline("$bar");
> > +       ut_assert_console_end();
> > +
> > +       ut_asserteq(1, run_command("dollar_foo=bar quux", 0));
> > +       /* Next line contains error message. */
> > +       ut_assert_skipline();
> > +       ut_assert_console_end();
> > +
> > +       ut_asserteq(1, run_command("dollar_foo='bar quux", 0));
> > +       /* Next line contains error message. */
> > +       ut_assert_skipline();
> > +       ut_assert_console_end();
> > +
> > +       ut_asserteq(1, run_command(R"(dollar_foo=bar quux")", 0));
> > +       /* Two next lines contain error message. */
> > +       ut_assert_skipline();
> > +       ut_assert_skipline();
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command(R"(dollar_foo='bar "quux')", 0));
> > +
> > +       ut_assertok(run_command("echo $dollar_foo", 0));
> > +       /*
> > +        * This one is buggy.
> > +        * ut_assert_nextline(R"(bar "quux)");
> > +        * ut_assert_console_end();
> > +        *
> > +        * So, let's reset output:
> > +        */
> > +       console_record_reset_enable();
> > +
> > +       ut_asserteq(1, run_command(R"(dollar_foo="bar 'quux")", 0));
> > +       /* Next line contains error message. */
> > +       ut_assert_skipline();
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command("dollar_foo='bar quux'", 0));
> > +       ut_assertok(run_command("echo $dollar_foo", 0));
> > +       ut_assert_nextline("bar quux");
> > +       ut_assert_console_end();
> > +
> > +       puts("Beware: this test set local variable dollar_foo and it
> > cannot be unset!"); +
> > +       return 0;
> > +}
> > +HUSH_TEST(hush_test_simple_dollar, 0);
> > +
> > +static int hush_test_env_dollar(struct unit_test_state *uts)
> > +{
> > +       env_set("env_foo", "bar");
> > +       console_record_reset_enable();
> > +
> > +       ut_assertok(run_command("echo $env_foo", 0));
> > +       ut_assert_nextline("bar");
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command("echo ${env_foo}", 0));
> > +       ut_assert_nextline("bar");
> > +       ut_assert_console_end();
> > +
> > +       /* Environment variables have precedence over local variable. */
> 
> spelling
> 
> also please avoid period before */
> 
> > +       ut_assertok(run_command("env_foo=quux", 0));
> > +       ut_assertok(run_command("echo ${env_foo}", 0));
> > +       ut_assert_nextline("bar");
> > +       ut_assert_console_end();
> > +
> > +       /* Clean up setting the variable. */
> > +       env_set("env_foo", NULL);
> > +
> > +       puts("Beware: this test set local variable env_foo and it cannot
> > be unset!");
> Don't you unset it in the previous line?

I unsetted the environment variable named env_foo, but the local variable 
sadly remained because it is not possible to unset local variable.
So, after running "ut hush", the following should occur:
=> ut hush
Running 20 hush tests
...
Failures: 0
=> echo env_foo
quux

> > +
> > +       return 0;
> > +}
> > +HUSH_TEST(hush_test_env_dollar, 0);
> > +
> > +static int hush_test_command_dollar(struct unit_test_state *uts)
> > +{
> > +       console_record_reset_enable();
> > +
> > +       ut_assertok(run_command(R"(dollar_bar="echo bar")", 0));
> > +
> > +       ut_assertok(run_command("$dollar_bar", 0));
> > +       ut_assert_nextline("bar");
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command("${dollar_bar}", 0));
> > +       ut_assert_nextline("bar");
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command(R"(dollar_bar="echo
> > +       bar")", 0));
> 
> newline in the middle of a string ?

I think this should be a problem with how the mailer rendered this because on 
my side it is:
ut_assertok(run_command(R"(dollar_bar="echo bar")", 0));
I will check this on v2 (which should arrive from within 15-30 minutes).

> 
> > +
> > +       ut_assertok(run_command("$dollar_bar", 0));
> > +       ut_assert_nextline("bar");
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command(R"(dollar_bar='echo bar
> > +       ')", 0));
> > +
> > +       ut_assertok(run_command("$dollar_bar", 0));
> > +       ut_assert_nextline("bar");
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command(R"(dollar_bar='echo bar\n')", 0));
> > +
> > +       ut_assertok(run_command("$dollar_bar", 0));
> > +       ut_assert_nextline("barn");
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command("dollar_bar='echo $bar'", 0));
> > +
> > +       ut_assertok(run_command("$dollar_bar", 0));
> > +       ut_assert_nextline("$bar");
> > +       ut_assert_console_end();
> > +
> > +       ut_assertok(run_command("dollar_quux=quux", 0));
> > +       ut_assertok(run_command(R"(dollar_bar="echo $dollar_quux")", 0));
> > +
> > +       ut_assertok(run_command("$dollar_bar", 0));
> > +       ut_assert_nextline("quux");
> > +       ut_assert_console_end();
> > +
> > +       puts("Beware: this test sets local variable dollar_bar and
> > dollar_quux and they cannot be unset!"); +
> > +       return 0;
> > +}
> > +HUSH_TEST(hush_test_command_dollar, 0);
> > --
> > 2.25.1
> 
> Regards,
> Simon





  reply	other threads:[~2022-02-06 18:22 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-31 16:13 [RFC PATCH v1 00/21] Modernize U-Boot shell Francis Laniel
2021-12-31 16:13 ` [RFC PATCH v1 01/21] test: Add framework to test hush behavior Francis Laniel
2022-01-08 14:53   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 02/21] test: hush: Test hush if/else Francis Laniel
2022-01-08 14:53   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 03/21] test/py: hush_if_test: Remove the test file Francis Laniel
2022-01-08 14:53   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 04/21] test: hush: Test hush variable expansion Francis Laniel
2022-01-08 14:53   ` Simon Glass
2022-02-06 18:22     ` Francis Laniel [this message]
2021-12-31 16:13 ` [RFC PATCH v1 05/21] test: hush: Test hush commands list Francis Laniel
2022-01-08 14:54   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 06/21] test: hush: Test hush loops Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 07/21] cli: Add Busybox upstream hush.c file Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 08/21] cli: Port Busybox 2021 hush to U-Boot Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 09/21] cli: Add choice for hush parser Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 10/21] cli: Add HUSH_2021_PARSER to hush parser choice Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 11/21] cli: Enables using hush 2021 parser as command line parser Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 12/21] cli: hush_2021: Enable variables expansion for hush 2021 Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 13/21] cli: hush_2021: Add functions to be called from run_command() Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 14/21] cli: Modify run_command() to add hush 2021 as parser Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 15/21] test: hush: Fix instructions list tests for hush 2021 Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 16/21] test: hush: Fix variable expansion " Francis Laniel
2022-01-12 20:03   ` Simon Glass
2022-02-06 18:23     ` Francis Laniel
2022-02-07 20:22       ` Simon Glass
2022-03-24  1:49         ` Francis Laniel
2021-12-31 16:13 ` [RFC PATCH v1 17/21] cli: hush_2021: Enable using \< and \> as string compare operators Francis Laniel
2022-01-12 20:03   ` Simon Glass
2022-02-06 18:23     ` Francis Laniel
2021-12-31 16:13 ` [RFC PATCH v1 18/21] cli: hush_2021: Enable if keyword Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 19/21] test: hush: Fix if tests for hush 2021 Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 20/21] cli: hush_2021: Enable loops Francis Laniel
2022-01-12 20:03   ` Simon Glass
2021-12-31 16:13 ` [RFC PATCH v1 21/21] test: hush: Fix loop tests for hush 2021 Francis Laniel
2022-01-12 20:03   ` Simon Glass
2022-01-31 22:15 ` [RFC PATCH v1 00/21] Modernize U-Boot shell Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2095969.irdbgypaU6@pwmachine \
    --to=francis.laniel@amarulasolutions.com \
    --cc=hws@denx.de \
    --cc=marek.behun@nic.cz \
    --cc=michael@amarulasolutions.com \
    --cc=sjg@chromium.org \
    --cc=u-boot@lists.denx.de \
    --cc=wd@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox